Tow Bar Wiring Specs:
Accessory Parts:
Features:
Avoid tapping into your towed vehicle's electrical system by using these self-contained tow lights. Heavy-duty magnets keep lights securely in place on your towed car.
Installation Notes:
Fuse(s) must be pulled during towing. If you have a 4 cylinder model, leave fuse #32 intact and pull the ABS fuse instead. Note: some models may label ABS fuse as #15 or #16. You will also need to install part RM-156-25; sold separately
Tech Tip:
4-cylinder models will require fuse bypass RM-76517, while V6 models will need to use part number RM76511.
More Information >Tow Bar Wiring Specs:
Accessory Parts:
Features:
Diode kit allows you to use your vehicle's tail lights and wiring system while preventing feedback from your RV. Wires 2-wire and 3-wire systems to operate as a combined lighting systems. Includes 7-wire to 6-wire Flexo-Coil electrical cord.
Installation Notes:
Fuse(s) must be pulled during towing. If you have a 4 cylinder model, leave fuse #32 intact and pull the ABS fuse instead. Note: some models may label ABS fuse as #15 or #16. You will also need to install part RM-156-25; sold separately
Tech Tip:
4-cylinder models will require fuse bypass RM-76517, while V6 models will need to use part number RM76511.
More Information >Tow Bar Wiring Specs:
Accessory Parts:
Features:
This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent feedback and wire your car to operate as a combined system. Includes a 7-way to 6-way straight adapter cord.
Installation Notes:
Fuse(s) must be pulled during towing. If you have a 4 cylinder model, leave fuse #32 intact and pull the ABS fuse instead. Note: some models may label ABS fuse as #15 or #16. You will also need to install part RM-156-25; sold separately
Tech Tip:
4-cylinder models will require fuse bypass RM-76517, while V6 models will need to use part number RM76511.
More Information >Tow Bar Wiring Specs:
Accessory Parts:
Features:
This wiring kit carries your RV's brake and turn signals to your towed car's tail lights. Diodes prevent electrical feedback. Towed car's tail lights will operate as a combined lighting system. 4-Pole wiring harness included.
Installation Notes:
Fuse(s) must be pulled during towing. If you have a 4 cylinder model, leave fuse #32 intact and pull the ABS fuse instead. Note: some models may label ABS fuse as #15 or #16. You will also need to install part RM-156-25; sold separately
Tech Tip:
4-cylinder models will require fuse bypass RM-76517, while V6 models will need to use part number RM76511.
More Information >Tow Bar Wiring Specs:
Accessory Parts:
Features:
Connect your towed car's lighting system to your RV to activate the signal lights required for towing. This universal harness wires in to your vehicle's existing wiring with the included connectors.
Installation Notes:
Fuse(s) must be pulled during towing. If you have a 4 cylinder model, leave fuse #32 intact and pull the ABS fuse instead. Note: some models may label ABS fuse as #15 or #16. You will also need to install part RM-76517, while V6 models will need to use part number RM76511.
More Information >Tow Bar Wiring Specs:
Accessory Parts:
Features:
This complete kit includes everything you need to correctly display your RV's brake and turn signals on your vehicle tail lights. Includes coiled 7-way to 6-way cable and 6-way car-side socket.
Installation Notes:
Fuse(s) must be pulled during towing. If you have a 4 cylinder model, leave fuse #32 intact and pull the ABS fuse instead. Note: some models may label ABS fuse as #15 or #16. You will also need to install part RM-156-25; sold separately
Tech Tip:
4-cylinder models will require fuse bypass RM-76517, while V6 models will need to use part number RM76511.
More Information >Tow Bar Wiring Specs:
Accessory Parts:
Features:
Diode kit allows you to use your vehicle's tail lights and wiring system while preventing feedback from your RV. Wires 2-wire and 3-wire systems to operate as a combined lighting systems. Includes 7-wire to 4-wire Flexo-Coil electrical cord.
Installation Notes:
Fuse(s) must be pulled during towing. If you have a 4 cylinder model, leave fuse #32 intact and pull the ABS fuse instead. Note: some models may label ABS fuse as #15 or #16. You will also need to install part RM-156-25; sold separately
Tech Tip:
4-cylinder models will require fuse bypass RM-76517, while V6 models will need to use part number RM76511.
More Information >Tow Bar Wiring Specs:
Accessory Parts:
Features:
Get lights for towing your vehicle without splicing into its wiring. Magnetic light kit provides a pair of stop, turn, and tail lights. Mounts using large, heavy-duty magnets for increased stability. Plugs in at rear of your motor home.
Installation Notes:
Fuse(s) must be pulled during towing. If you have a 4 cylinder model, leave fuse #32 intact and pull the ABS fuse instead. Note: some models may label ABS fuse as #15 or #16. You will also need to install part RM-156-25; sold separately
Tech Tip:
4-cylinder models will require fuse bypass RM-76517, while V6 models will need to use part number RM76511.
More Information >Tow Bar Wiring Specs:
Accessory Parts:
Features:
Get the signal lights needed for towing without tapping into your towed car's electrical system. Bright LEDs mount inside your vehicle's tail light housings, and wiring runs beneath your car for a seamless appearance. 450 Lumens per bulb.
Installation Notes:
Fuse(s) must be pulled during towing. If you have a 4 cylinder model, leave fuse #32 intact and pull the ABS fuse instead. Note: some models may label ABS fuse as #15 or #16. You will also need to install part RM-156-25; sold separately
Tech Tip:
4-cylinder models will require fuse bypass RM-76517, while V6 models will need to use part number RM76511.
More Information >Tow Bar Wiring Specs:
Accessory Parts:
Features:
Use your towed car's signal lights without tapping into its wiring. This self-contained wiring kit bypasses your vehicle's electrical system, eliminating any concerns over violating the manufacturer's warranty.
Installation Notes:
Fuse(s) must be pulled during towing. If you have a 4 cylinder model, leave fuse #32 intact and pull the ABS fuse instead. Note: some models may label ABS fuse as #15 or #16. You will also need to install part RM-156-25; sold separately
Tech Tip:
4-cylinder models will require fuse bypass RM-76517, while V6 models will need to use part number RM76511.
More Information >Tow Bar Wiring Specs:
Accessory Parts:
Features:
Get the signal lights needed for towing without tapping into your towed car's electrical system. Bright LEDs mount inside your vehicle's tail light housings, and wiring runs beneath your car for a seamless appearance. 450 Lumens per bulb.
Installation Notes:
Fuse(s) must be pulled during towing. If you have a 4 cylinder model, leave fuse #32 intact and pull the ABS fuse instead. Note: some models may label ABS fuse as #15 or #16. You will also need to install part RM-156-25; sold separately
Tech Tip:
4-cylinder models will require fuse bypass RM-76517, while V6 models will need to use part number RM76511.
More Information >Tow Bar Wiring Specs:
Accessory Parts:
Features:
Removable LED lights provide signal lights for your towed car without you having to tap into the car's wiring or run wires under the car. Wireless transmitter plugs into your RV's 4-way connector and sends a signal to the magnetic lights.
Installation Notes:
Fuse(s) must be pulled during towing. If you have a 4 cylinder model, leave fuse #32 intact and pull the ABS fuse instead. Note: some models may label ABS fuse as #15 or #16. You will also need to install part RM-156-25; sold separately
Tech Tip:
4-cylinder models will require fuse bypass RM-76517, while V6 models will need to use part number RM76511.
More Information >Tow Bar Wiring Specs:
Accessory Parts:
Features:
Weatherproof LED tow bar light provides stop, tail, side marker, and turn functions for your towed trailer or vehicle. Wireless design eliminates cords for hands-free control. Magnetic base provides secure grip. Rechargeable battery.
Installation Notes:
Fuse(s) must be pulled during towing. If you have a 4 cylinder model, leave fuse #32 intact and pull the ABS fuse instead. Note: some models may label ABS fuse as #15 or #16. You will also need to install part RM-156-25; sold separately
Tech Tip:
4-cylinder models will require fuse bypass RM-76517, while V6 models will need to use part number RM76511.
More Information >Tow Bar Wiring Specs:
Accessory Parts:
Features:
Great for either your trailer or towed vehicle, these magnetic lights ensure that you have emergency flashers and the signal lights required for towing without having to tap into existing wiring. Long-lasting LEDs offer superior operation.
Installation Notes:
Fuse(s) must be pulled during towing. If you have a 4 cylinder model, leave fuse #32 intact and pull the ABS fuse instead. Note: some models may label ABS fuse as #15 or #16. You will also need to install part RM-76517, while V6 models will need to use part number RM76511.
More Information >Tow Bar Wiring Specs:
Accessory Parts:
Features:
Perfect for tow bars with built-in channels, this complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent feedback and wire your car to operate as a combined system.
Installation Notes:
Fuse(s) must be pulled during towing. If you have a 4 cylinder model, leave fuse #32 intact and pull the ABS fuse instead. Note: some models may label ABS fuse as #15 or #16. You will also need to install part RM-156-25; sold separately
Tech Tip:
4-cylinder models will require fuse bypass RM-76517, while V6 models will need to use part number RM76511.
More Information >Tow Bar Wiring Specs:
Accessory Parts:
Features:
(2) 4" Diameter magnetic LED tow lights provide stop, tail, and turn signals for your towed car without splicing into its wiring. Heavy-duty magnetic bases provide a secure hold. 20-Ft harness with 4-Flat plug connects to RV.
Installation Notes:
Fuse(s) must be pulled during towing. If you have a 4 cylinder model, leave fuse #32 intact and pull the ABS fuse instead. Note: some models may label ABS fuse as #15 or #16. You will also need to install part RM-156-25; sold separately
Tech Tip:
4-cylinder models will require fuse bypass RM-76517, while V6 models will need to use part number RM76511.
More Information >Tow Bar Wiring Specs:
Accessory Parts:
Features:
Weatherproof LED tow bar light provides stop, tail, side marker, and turn functions for your towed trailer or vehicle. Wireless design eliminates cords for hands-free control. Magnetic base provides secure grip. Rechargeable battery.
Installation Notes:
Fuse(s) must be pulled during towing. If you have a 4 cylinder model, leave fuse #32 intact and pull the ABS fuse instead. Note: some models may label ABS fuse as #15 or #16. You will also need to install part RM-156-25; sold separately
Tech Tip:
4-cylinder models will require fuse bypass RM-76517, while V6 models will need to use part number RM76511.
More Information >Tow Bar Wiring Specs:
Accessory Parts:
Features:
Great for either your trailer or towed vehicle, these magnetic, 2-sided lights ensure that you have emergency flashers and the signal lights required for towing without having to tap into existing wiring. Long-lasting LEDs offer superior operation.
Tech Tip:
4-cylinder models will require fuse bypass RM-76517, while V6 models will need to use part number RM76511.
More Information >Tow Bar Wiring Specs:
Accessory Parts:
Features:
Wire your vehicle and get the signal lights required for flat towing without having to splice into your wiring with this custom, plug-in harness. Integrated diodes prevent feedback from RV for safe operation.
Installation Notes:
Fuse(s) must be pulled during towing. If you have a 4 cylinder model, leave fuse #32 intact and pull the ABS fuse instead. Note: some models may label ABS fuse as #15 or #16. You will also need to install part RM-156-25; sold separately
Tech Tip:
4-cylinder models will require fuse bypass RM-76517, while V6 models will need to use part number RM76511.
More Information >Tow Bar Wiring Specs:
Accessory Parts:
Features:
This kit provides your trailer or towed vehicle with the required lighting for towing. Durable rubber-coated housing and polycarbonate lens. Magnetic bases won't scratch your vehicle. Includes wiring harness, hardware, and carrying case.
Installation Notes:
Fuse(s) must be pulled during towing. If you have a 4 cylinder model, leave fuse #32 intact and pull the ABS fuse instead. Note: some models may label ABS fuse as #15 or #16. You will also need to install part RM-156-25; sold separately
Tech Tip:
4-cylinder models will require fuse bypass RM-76517, while V6 models will need to use part number RM76511.
More Information >Tow Bar Wiring Specs:
Accessory Parts:
Features:
Get turn signals and brake lights on your towed vehicle without tapping into the wiring. Light bar plugs into the 12-volt port in your car, with a wireless transmitter that plugs into your 7-way. Keeps you safe and legal while flat or dolly towing.
Installation Notes:
Fuse(s) must be pulled during towing. If you have a 4 cylinder model, leave fuse #32 intact and pull the ABS fuse instead. Note: some models may label ABS fuse as #15 or #16. You will also need to install part RM-156-25; sold separately
Tech Tip:
4-cylinder models will require fuse bypass RM-76517, while V6 models will need to use part number RM76511.
More Information >Videos
for Tow Bar Wiring
Help Articles
for Tow Bar Wiring
Expert Answers
for Tow Bar Wiring
When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…
view full answer...What you need is a light kit specifically for flat-towing. The Plug-N-Tow TM Vehicle Wiring Harness, #42615, would be if the Jeep were towing a trailer and not for activating its lights while it is being towed. There are a few options for lighting…
view full answer...Whether or not you can flat tow with a Jeep bumper is really up to the manufacturers testing; some of the big names like MetalCloak or Poison Spyder have bumpers with D-ring attachments that can be used for flat towing connections. This is great…
view full answer...Hey Robert, for your 2016 Jeep Wrangler using the Ready Brute Elite II tow bar you can use the Blue Ox Base Plate Kit #BX1126 with the Blue Ox Base Plate Adapter Brackets for Ready Brute Elite Tow Bars #BX88297. From here, to complete your flat…
view full answer...Yes, your 2017 Chevrolet Equinox FWD can be flat towed with all 4 wheels on the ground. Do understand that you will need to run your Equinox for 5 minutes every time you stop for gas to properly lubricate your transmission and before towing. A…
view full answer...Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this…
view full answer...You have a good eye Richard, as there is not a difference between the etrailer and Demco base plates that fit your 2024 Ford Maverick: - etrailer Invisible Base Plate Kit e64FV - Demco Tabless Base Plate Kit #DM77YV Both will fit your…
view full answer...Hey Ken, so the first thing you will need is a base plate kit like the Blue Ox part #BLU85CR which fits your 2023 GMC Canyon and would be compatible with your Blue Ox tow bar. I do not know what braking system you had in the past but for a…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...What you need is the Roadmaster Brake Lite Relay Kit part #RM-88400. This will prevent your brake pedal brake light activation from overriding the turn signals like you are experiencing.
view full answer...Here are the steps to prepare your 2023 Ford Bronco Big Bend for flat towing. The transfer case and transmission will be in neutral with the ignition off. This information is in your owners manual. Switching Neutral Tow On 1.Switch your vehicle to…
view full answer...Hey there Jeff, thanks for the question and I can definitely get you all the parts needed to flat tow your 2014 Chevy Silverado 1500 behind your motorhome. I'll go ahead and list everything out for you to make it easy to order. - Base…
view full answer...Filter Products (42)
Contact and Help
What our customers are saying:
In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!
Randy
Watkinsville, GA