SnowBear Proshovel Snowplow for 2" Hitches - Electric Actuator - 88" Wide x 26" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"

SnowBear Proshovel Snowplow for 2" Hitches - Electric Actuator - 88" Wide x 26" Tall
part number: SB324-140

Hitch-mounted snowplow makes short work of your snowy driveway or parking lot. Pivoting, 5-position blade glides over uneven ground. Long-lasting actuator with internal clutch lets you operate plow from your warm cab.

Features:

• Hitch-mounted plow lets you clear parking lots and driveways with your vehicle
• Plow sits close enough to vehicle to reduce leverage and strain on plow, mounts, and vehicle
• Electric actuator raises and lowers plow smoothly and consistently
  • Internal clutch prevents damage caused by attempting to under- or overextend the actuator
  • Simple, chain-lifting design has fewer moving parts than a winch
• In-cab toggle switch lets you raise and lower the plow from the comfort of your vehicle
  • Includes a wireless remote control as an alternative to the toggle switch
• Adjustable, 5-position blade can be manually angled left, right, and straight ahead
  • Manual release handle is easily accessible from front or back of plow
• Terrain-adjustable design for efficient plowing with less tripping
  • Rocking blade pivots up to 6" to allow maneuvering over uneven terrain
  • Trip springs and eyebolts are angled so blade rests on ground at correct angle
• Sturdy steel edge scrapes over a variety of solid surfaces - not for gravel or sand
  • Poly scraper blade attachment (SB324-070 - sold separately) allows you to plow over grass or decorative pavement without worry of damage
• Skid shoes let you adjust plow height to prevent blade from digging into the ground
• Strong rubber deflector allows for better visibility by directing snow away from your windshield
• Red visibility markers help you see plow edges so you can steer away from obstacles
• Rugged and durable, all-steel construction
• Black powder coat finish provides corrosion resistance
• Simple installation
  • Slides into your vehicle's 2" front trailer hitch receiver
• ISO certification ensures consistent, quality manufacturing
• Assembly required
• Made in Canada

Specs:

• Application: 2" x 2" front-mounted trailer hitch receiver
• Blade dimensions: 88" wide x 26" tall
• Height adjustment: 9"
• 5 Blade angles:
  • Left 11 degrees
  • Left 22 degrees
  • Straight ahead
  • Right 11 degrees
  • Right 22 degrees
• Distance from bumper: 39"
• Actuator lift capacity: 1,000 lbs
• Weight: 390 lbs
• 1-Year limited warranty

Note: Due to the size of this item it ships via truck freight.

The SnowBear Proshovel conveniently slides into your vehicle's front-mounted trailer hitch for easy, convenient mounting. Smoothly and easily raise and lower the plow from the comfort of your cab with the remote-controlled electric actuator. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain. Angled trip springs are also built in to help keep the blade from catching and tripping. Being just 39" away from the bumper, the Proshovel snowplow has a compact yet strong and sturdy design.

Simple, Hitch-Mounted Installation

This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. Unlike a plow that attaches to custom-fit brackets, which ties you down to just 1 vehicle, this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.

To install the Proshovel snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver . Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.

How to Plow

Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, 11 degrees to the left or to the right, or 22 degrees to the left or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or private roadway where piling the snow straight ahead would create a barrier.

To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote or the in-cab toggle switch, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the Proshovel.

When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.

Smooth, Controlled Lifting with Electric Actuator

The electric actuator on this plow allows you to lift and lower the blade using a toggle switch that mounts in your cab. You can also use the included wireless remote control. To raise the plow, activate the actuator. As the actuator moves along the internal screw, the arm on top of the actuator will pivot, raising the plow blade by pulling the chain that is attached to it. Having fewer moving parts than a typical winch makes this setup less complicated and less likely to break down than other plow lifting and lowering devices. There is also an internal clutch system that prevents damage to the actuator should you try to raise the blade too high or lower it too low.

Add-On Accessories

SnowBear offers a plethora of helpful accessories to make plowing even safer and easier. Along with the available accessories to enhance your snowplowing experience, many parts of the SnowBear Proshovel snowplow are available separately, so you can replace worn-out pieces without having to replace the whole plow.

The off-road halogen light kit (SB324-127) may be necessary if your plow blocks your vehicle's headlights. This kit will light up the way when you're plowing at night or in the early morning. The light kit mounts directly to your plow frame and offers increased visibility when plowing in dark conditions. The 2 bright halogen lights make it easier for you to see where you are going and for others to see you.

With the caster kit (SB324-126), it will be a breeze to move and store the Proshovel snowplow when it's not in use. These wheels mount directly behind the blade and they can be easily folded down for use and up for storage. In addition, these wheels will not weigh the plow down.

The drop extension kit (SB324-128) allows you to use your SnowBear snowplow on your lifted vehicle. With 6" of drop, this bolt-on kit ensures that the plow makes proper contact with the ground. Its sturdy steel construction is just as strong and durable as the plow itself.

If you are worried about causing damage to your lawn or pathway, the poly scraper attachment (SB324-070) is perfect for replacing the harsh, steel scraper on the Proshovel. The polymer construction is strong enough to still help plow efficiently, but gentle enough to not hurt your lawn or pathway.

324-140 Snow Bear Pro Shovel Snow Plow for 2" Hitches - Electric Actuator - 88" Wide x 26" Tall

Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
part number: 31108

Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

Features:

• Front-mount hitch provides attachment point for hitch-mounted accessories
  • Winch, spare tire carrier, snowplow, cargo carrier and more
  • No more blindly backing trailer in - just hook it up and drive it forward
• Custom fit is designed specifically for your vehicle
• Precision, robotic welding maximizes strength and improves fit
• Easy, bolt-on installation - no welding required
  • Complete hardware kit and installation instructions included
• Lifetime technical support from the experts at etrailer.com
• Gloss black powder coat finish over steel resists corrosion
• Sturdy, square-tube design
• Assembled in USA

Specs:

• Line pull: 9,000 lbs
• Vertical load: 500 lbs
• Gross trailer weight: 5,000 lbs
• Receiver opening: 2" x 2"
• Pin hole diameter: 5/8"
• Limited lifetime warranty

etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

31108 Curt Front-Mount Trailer Hitch Receiver

Customer Reviews

SnowBear Proshovel Snowplow for 2" Hitches - Electric Actuator - 88" Wide x 26" Tall - SB324-140

Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - 31108

Average Customer Rating:  4.8 out of 5 stars   (116 Customer Reviews)

Order: RelevanceNewestRating - High to LowRating - Low to High Hitch-mounted snowplow makes short work of your snowy driveway or parking lot. Pivoting, 5-position blade glides over uneven ground. Long-lasting actuator with internal clutch lets you operate plow from your warm cab. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

by: John03/30/2020

2004 Chevrolet Silverado

I had been waiting to find this Curt hitch on sale for a while.
First off I get to keep the hooks that came with my 2004 Silverado Crew cab 2500HD 4x4.
Then I removed two existing bolts and loosened a third on each hook.
Using a floor jack lifted the hitch into place and threaded in the new bolts through the frame and into the hooks.
The biggest problem I had was being able to reach the bolts into the side of the frame and hooks w/out removing the air dam.
Looks GREAT!!

I know some reviews have mentioned a reduction in ground clearance but my truck is not lifted and the clearance is nearly the same as the transmission skid plate installed by the factory.

I sometimes need to get low hard to see trailers into tight spaces and I’m also looking to pick up a winch. Looking forward to many years of hard work. 772618

Click to Enlarge

John

3/31/2021

This has made getting trailers parked closely and out of the way at job sites so much easier. Whish I hed it years ago!

by: Dale Miles01/25/2014

Unbelievable how clean the install is for this product!! I was certain I would have to do some cutting or drilling, however not a single cut or new hole required. The product fit like it was straight from the factory ... even with the existing front Grille Guard that I have on my truck!!

I also appreciate the FAST shipping and customer service, as tracking info was emailed after the product shipped without requesting this info and the product arrived within the same week.

I've already recommended etrailer to other landscapers on lawnsite.com, as we're always looking for front-mount solutions for spreaders and other landscape equipment.114724

Click to Enlarge

Click to Enlarge

Dale M.

1/28/2015

I have to say that I absolutely LOVE this product!! It works perfect for mounting my walk-behind fertilizer spreader to the front of my truck while having the larger PermaGreen spreader on the back of my truck. Having this front-mounted hitch has allowed me to carry both of my spreaders and not sprain my back while wrestling the smaller spreader out of the bed of my truck as I had before.

by: Terry11/04/2021

This was possibly the easiest hitch install I've ever done! All the holes lined up, the onle thing was two of the bolts they supplied are not long enough,I had the longer bolts in stock and finished. I haul a truck camper so needed the extra cargo space, looks like it'll work!

there was 4 bolts in the kit to replace the bolts in the tow hooks, the 2 that went into the side where the ones that where too short, they where 1 3/4" I replaced them with 2 1/4" bolts. There was a gap between the hitch mount and the frame approximately 1/16" that a washer filled that gap. I'm a retired shop owner that did auto repair and fabrication so it was an easy install.1194999

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Jenny N.

11/8/2021

I will have our customer service team reach out to you. The hitch manufacturer prefers to have the hardware that comes with the hitch be used for warranty purposes.

by: Matthew05/10/2020

2006 Chevrolet Silverado

This was the easiest installation of the 10 or more hitches that I have installed. Four bolts out and replaced with four suppler bolts and washer. No modification of the air dam needed.

I needed some washers (supplied) between the frame and the receiver as spacers. I recommended that you figure out how many you need (1 or 2 per side), then lower it down and tape them in place to hold them in place and push the bolts through the tape after you lift it back in place.

Cover the ground with a rug or cardboard to keep from scratching the receiver when it’s on the ground before you lift it into place. 794821

Click to Enlarge

Matthew

5/11/2021

Still good. No corrosion or other issues.

by: Pat C.07/04/2020

I purchased the front hitch for my truck. With a fifth wheel I can’t carry bikes anywhere but the front. I really don’t trust the strength of the rear bumper on these RV’s. Hitch went on easy in the garage with no alterations needed. The bikes sit a bit high but that’s not the hitch problem....
I will also use it for other functions around the truck...push/re-locate utility trailer in tight spaces, use for a rack to haul stuff like firewood etc...when back hitch is unavailable.828011

Click to Enlarge

by: David07/27/2022

Easy install; unobtrusive, but hitch receiver is far enough forward I can install the bike rack without needing an extension.1340004

Click to Enlarge

by: Wayne10/06/2022

Great product easy installation reinforces your front end will definitely buy again for my next truck1440892

Click to Enlarge

Click to Enlarge

by: Hans11/09/2013

2003 GMCSierra

This is the second hitch I've ordered for my truck. This hitch was very easy to install on the front of my GMC Sierra and is almost unnoticeable, which I like. I use it to transport a small Honda Trail 90 motorcycle, and it's 9000lb rating is well above what I am asking it to do. It arrived via UPS several days after ordering, was in good shape, and only took ten minutes to install with only two different size socket wrenches. Highly recommend this unit for the front of any truck. 106857

Click to Enlarge

by: Charlie P02/08/2014

2004 GMC Sierra 3500

The 31108 Front Mount Hitch Receiver was a perfect match for my 2004 GMC Sierra 3500. I seemed well built and the instructions were clear and easy to understand. I installed the hitch in under 45 minutes and that includes prep time. No special tools required. See photo attached.116073

Click to Enlarge

by: Chris12/22/2023

I waited 12 days for a shipment from amazon and the hitch was lost. They want to send me another hitch with a due date of January 6, 2024! You guys are the best! 2 day’s service was outstanding!!!1704839

by: Alfred 12/28/2022

Fit great lineup no modifications happy with the results1490251

Alfred

1/31/2024

Wonderful very satisfied with the sales department and the quality of the product

by: Bill Schmall 06/26/2014

I would add to your instruction, if you have the factory hooks, remove the four bolts as stated and give to customer, " loosen the other two bolts on the outside of frame" this gives you a little wiggle room to start the new bolts. BUT great product and great people.137891

Click to Enlarge

Click to Enlarge

by: Doug05/16/2020

This hitch mounted to tow hooks just as described, even with existing brush guard. Needed it to haul a generator the only issue was the brush guard stuck out too far so I had to buy a 12" extender. Now every thing works as planned. Shipping was fast and customer service was great.
Thank You798381

Click to Enlarge

Click to Enlarge

by: Chuck04/22/2024

You sent me the wrong part. 1771469

by: Brian02/22/2019

2006 Chevrolet Silverado

Very good quality, Heavy Duty hitch that looks easy to install.
Ian W was very helpful with my order and customer service has been great.
This hitch fits the Chevy Silverado 2500 and 3500 I believe. My Chevy is a 2006 model.
I highly recommend Curt hitches and ETRAILER.COM.
Brian607401

Brian

2/26/2020

The front hitch was easy to install and has been very useful. I just wished the 2006 Chevy Silverado had more clearance as far as height goes on the front end.Mine is a 4x4 but it could sure use a lift kit. The hitch is great though!

by: Rod S.09/09/2013

2005 Chevrolet Silverado

15 minute, piece of cake single-handed install. Instructions say cutting fascia optional on 2500. Not even close to needing to. Truck is 2005 Silverado 2500HD. Receiver sits up there nice and tight, so doesn't change ground clearances. 99139

Click to Enlarge

by: John 09/16/2023

Hitch is in excellent condition even though it tried to get out of the box.1668393

by: Bill 10/15/2023

2003 GMCSierra

Repetitively easy to Mount and was still able to keep the factory toe hooks installed1682386

by: Peter12/16/2022

I did not get a chance to put it on right away. Now that I have put the front hitch on , it looks great. It was harder getting the original old bolts off than it was putting on the hitch. The hitch went on quickly and now I can use it to put a plow on for these snowy Ohio winters.1485967

by: Rusty M03/25/2018

Chevrolet

Front hitch for 2005 Chevy 2500hd that I ordered from etrailer.com488917

Click to Enlarge

by: Scott03/12/2023

I installed the hitch with no problems, looks great. The item was poorly packed for shipping and I consider myself lucky to see it arrive.1535289

by: Bob 01/30/2023

Easy install, the bolts that went into the recovery hooks were about 1/2” short and couldn’t get the threads to bite1510269

by: Clark 08/30/2022

2002 Honda Silverado

This hitch was great! What really saved the day was the fact that eTrailer had taken the time to make a video of how to install it. I watched it twice and she went right on. I have an old vintage Honda Trail 90 that I like to haul every now and then. Camper on the back....motorcycle out front!1384311

by: Andy G01/13/2015

I received the product (hitch) today and haven't had the opportunity to put it on my truck. I hope to do that this week or next. I can write an additional review at that time. Wayne H. did a great job clarifying which hitch would be best for my needs. I'll summit a picture after it is installed. 168830

Andy G.

1/13/2016

I love the product. It has come in lhandy many times when moving my trailer and boats. I would definitely purchase another if I ever purchase another truck in the future. I would recommend this product to anyone.

by: Matt02/27/2019

Worked even with all my aftermarket parts in this can aftermarker ranchhand bumper. Had to use extension to work but it works.608700

Matt

2/28/2020

1 Year Review- The Hitch mount seems to have held up to the abuse of running my plow at my rural driveway400ft longand 1 to 2ft tall of drifting snow and my workplace in town3in to 1ft of snow and up to 2ft tall drifts at the building. I takes an hr to plow my workplace at minimum and I have pushed a lot of snow. I have broke my plow 2 times in this time frame. Im going to have to replace the hitch extension as its starting to bend but the hitch and mount seem held up well.I have been stuck in my driveway with my plow down and pile of snow bigger then my truck. Waiting for a back hoe to come dig me out 2 times. I straight abuse it for what its meant for and its done well. Very Happy

25

116

Show More Reviews

Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?

• Height of Front Hitch Receiver for SnowBear SnowPlow
  
• The SnowBear Proshovel Snowplow for 2" Hitches - Electric Actuator - 88" Wide x 26" Tall item # SB324-140 needs to be mounted 9"-10" above the ground. There is an extension kit if your Ford F-250 is lifted or sits to high. It is the Drop Extension Kit for SnowBear Snowplows - Bolt On - 3" Drop item # SB324-128. This bolt-on kit ensures that the plow makes proper contact with the ground. Its sturdy steel construction is just as strong and durable as the plow itself.
  view full answer...


• Snowplow that Fits a Front Mount Hitch Receiver on a 2017 Ford F-150
  
• For your 2017 Ford F-150 I recommend the SnowBear Proshovel plow, # SB324-140. This plow fits into a 2 inch hitch receiver. It has an electric actuator to raise and lower the plow from inside the truck cab so you won't have to get in and out of the truck to raise and lower the plow. It also comes with a wireless remote which you can use instead of the toggle switch if you want. This plow also has 5 plow angles and 9 inches of vertical adjustment. The plow weighs 390 pounds so make sure
  view full answer...


• SnowBear Proshovel Snowplow # SB324-140 Shipping Weight and Number of Boxes
  
• The SnowBear Proshovel Snowplow for 2" Hitches # SB324-140 has a shipping weight of 390 lbs. We drop ship this product from the manufacturer and it comes in 3 boxes that are between 75 and 150 lbs each. My contact couldn't give me a specific on individual box weights. It comes with 3 boxes on 1 skid but does not require a forklift as the 3 boxes can be individually lifted separately if desired.
  view full answer...


• Will a Swagman XTC-4 Trailer Hitch Mount Bike Rack Fit a Front Mount Hitch on a 2005 Chevy Silverado
  
• You will need to measure from the center of the hitch pin hole out to the distance required to clear the front of the vehicle. If that distance is less than 3 inches, the Swagman XTC-4, # S64665, will clear when folded up. Having 4 bikes on the front of the vehicle on this rack would extend the length of the vehicle by 45 or so inches. It will severely limit the amount of the road the driver will see especially since the rack angles up the further away from the vehicle it is. It will
  view full answer...


• Cargo Carrier for Front Mounted Receiver on 2005 Silverado to Carry Chest Freezer Full of Elk
  
• What are the dimensions of the freezer you're asking about? The standard railed carrier, like the Pro Series # 63153 measures 24x60. For something a bit narrow and longer at 49x 22-1/2, take a look at the Curt # C18113. Both carriers have a 500 lb capacity, but keep in mind that the weight of the carrier plays into the tongue weight as well. The carrier, the freezer and the meat in the freezer couldn't weigh more than 500 lbs. You should also consider that carrying a freezer on the
  view full answer...


• Is There a Difference Between the Curt and Draw-Tite Front Hitch for a 2005 Chevy Suburban
  
• The Draw-Tite front mount hitch # 65028 and the Curt Front Hitch # 31108 are very similar, but they are not the same hitch. This was not intentional, the manufacturers just so happened to come up with very similar designs for the hitch coincidentally. Since both hitches are so similar and have the same capacities I would not be able to recommend one over the other as both would work very well for you. I attached installation instructions for both product for you to check out.
  view full answer...


• Front Hitch that Fits 2006 Chevy Silverado 2500HD Diesel
  
• Yes we have the Curt front hitch part # 31108 which is a confirmed fit for your 2006 Chevy Silverado 2500HD with a diesel engine. I attached an install video for this for you to check out as well.
  view full answer...


• Install Curt Front Mount Trailer Hitch Receiver, # 31108, on 03 GMC 2500 Yukon XL with skid plates
  
• On the Curt Front Mount Trailer Hitch Receiver, # 31108, there is minor fascia trim required when installing on 2003 GMC 2500 Yukon XL. As far as the fitment on your vehicle with the skid plates istalled, I checked with the supplier (Curt), they said they have not heard of any problems of them fitting with factory skid plates, but if the skid plates were a dealer installed item, which is an aftermarket item, they would not know because they do not test their fitments against aftermarket
  view full answer...


• Is Fascia Trimming Required for Front Mount Hitch Installation on the 2005 Chevy 3500
  
• The directions state that Fascia trimming is optional on 2500 H.D./ 3500 models. This means that when the front mount hitch, item # 31108, is installed the bottom of the receiver tube will contact the air dam under the front bumper of your 2005 Chevrolet 3500 pickup. This contact over time will wear on the air dam, so you may decide to trim it a bit before installation of the hitch. Otherwise the hitch install is a direct bolt on installation with no drilling required. My recommendation
  view full answer...


• Front Mount Hitch for a 2002 GMC Sierra 2500HD for using a Fisher Minute Mount Plow
  
• The Curt front mount hitch, part # 31108, will fit your 2002 GMC 2500. It provides a standard 2 inch receiver opening, so if that is what the Fisher plow needs, you should be set. I would double check with Fisher or the plow instructions to make sure what kind of attachment it needs. The hitch has a tongue weight capacity of 500 pounds and a gross load capacity of 5,000 pounds. I have added a link to the instructions below.
  view full answer...


• Front Receiver Hitch Vertical Load Ratings for 2004 Chevrolet Silverado 2500HD
  
• Currently the only front receiver hitch's available have a 500lb maximum vertical load. The Curt Front Mount Trailer Hitch Receiver # 31108 has a maximum 500lb vertical load, 5,000lb trailer weight and 9,000lb line pull rating. Draw-Tite Front Mount Trailer Hitch Receiver # 65028 has a maximum 500lb vertical load, 5,000lb trailer weight and 9,000lb line pull rating.
  view full answer...


• Front Mount Trailer Hitch Receiver Options for a 2000 Chevrolet Silverado 2500 HD 4x4
  
• If your 2000 Chevy is a C/K series then you will want to use part # 31042 for Curt or part # 65005 for Draw-Tite but if your truck is the Silverado version then you will want to use part # 31108 for Curt or part # 65028 for Draw-Tite. All of the above trailer hitches have a 2" receiver tube opening with a vertical line pull rating of 9,000 lbs and a vertical load rating of 500 lbs. I have attached an installation video of the Curt Silverado hitch installed on a similar 2003 Chevy
  view full answer...


• Which Curt Front Hitches Fit LD Version of 2002 Chevy Silverado
  
• If your 2002 Chevy Silverado LD is a 1500 model the Curt Front Hitch you need is the part # 31302. If it's a 2500 LD the Curt front hitch you need is the part # 31108.
  view full answer...


• Which Front Hitch Fits a 2006 GMC 1500 Sierra
  
• Sounds like you have a 1500HD and the correct Curt hitch you need is the part # 31108 and not the part # 31302 which is for the 1500LD trucks.
  view full answer...


• Front Mount Hitch Fascia Trimming Required for a 2003 Chevrolet Silverado Duramax
  
• All of the front mount hitches for the 2003 Chevrolet Silverado may require trimming of the black plastic fascia, that is mounted under the front bumper of your truck, depending on how the front bumper is mounted to the frame on each individual vehicle. Since you have a Duramax engine in your truck, you most likely need a front mount hitch that will fit a 2500 or 3500 series pickup. The Draw-Tite Front Mount Trailer Hitch Receiver, item # 65028, for the 2500 and 3500 series trucks does
  view full answer...


• Will Curt Front Mount Trailer Hitch # 31108 Fit a 2002 GMC Sierra 1500HD
  
• According to Curt Manufacturing, the Front Mount Hitch, # 31108, will fit your 2002 GMC Sierra 1500HD. I have included a link to the installation details for this hitch. Another front mount trailer hitch that will fit is Draw-Tite Hitch, # 65028. I have included a link to the installation instructions for this hitch as well.
  view full answer...


• Hitch Receiver Recommendation for 2002 GMC Sierra 1500
  
• One option for a hitch receiver that has been confirmed to fit a 2002 GMC Sierra 1500 with standard bumper is the Curt Class IV Custom Fit 2" Hitch Receiver, # C14332. This hitch offers bolt-on installation with no drilling or welding required. I have attached a link to all of the hitch receivers available for the 2002 GMC Sierra. From this link you can choose your vehicle style to narrow down the search to the receivers that are available for your specific vehicle. I spoke with my
  view full answer...


• Compatibility of Curt Front Mounted Hitch on 2005 Chevy Avalanche 2500 LT
  
• The Curt Front Mount Trailer Hitch Receiver # 31108 is not a fit for your 2005 Chevy Avalanche 2500 according to my contact at Curt. You instead will want the Curt - Custom Fit - 2"# 31302 which is a fit.
  view full answer...


• Will Curt Hitch, # 31108, Fit On A 2007 Chevy 2500 HD And Hold A 250 Lb. Dirt Bike
  
• The Curt Front Hitch, # 31108, has a 500 lbs. tongue weight capacity. The hitch will carry the 250 lb. dirt bike, but you will want to check what the front Gross Axle Weight Rating (GAWR) is on your 2007 Chevy 2500 HD. You will not want to exceed the Gross Axle Weight Rating for your vehicle. We have the etrailer Motorcycle Carrier for 2 Inch Hitches # e98873, that has a 500 lbs. weight capacity. Also we have the Erickson Motorcycle Tie Downs, # EM05729. I am sending a link to the
  view full answer...


• Availability of Front Mounted Hitch for 2006 GMC Sierra
  
• The Curt Front Mount Trailer Hitch part # 31108 is a confirmed fit for your 2006 GMC Sierra and will provide a fit for your 2 inch hitch-mounted bike rack. I have included instructions for the proper installation of this front-mounted trailer hitch. You may find some issues with a front mounted bike rack however. Visibility may be an issue. In addition, the fully-loaded bike rack may block the head lights and/or license plate. Finally, the bikes may block airflow through the grille,
  view full answer...


• Front Hitch Recommendation for a 2010 Chevy Silverado 1500
  
• We carry a front hitch for your 2010 Chevy Silverado 1500 for that you would want, part # 65052. This hitch has a line pull capacity of 9,000 lbs and a tongue weight capacity of 500 lbs so as long as you stay under that you will be just fine.
  view full answer...


• Difference Between 2004 Chevy Silverado 2500 Curt and Draw-Tite Front Hitches
  
• The only real difference between the Curt # 31108 and Draw-Tite # 65028 front hitches for your 2004 Chevy Silverado 2500 is that we've found the Curt hitches to traditionally have a little thicker of a powder coat which means they are a little better protected against the elements as well as scratches. Because of this I recommend the Curt over the Draw-Tite. Aside from that these hitches will install the exact same way and have the same weight capacities so it's just two different manufacturers
  view full answer...


• Comparing Curt Versus Draw-Tite Front Trailer Hitch Receivers For a 2004 Chevrolet Silverado 2500
  
• The Curt # 31108 and Draw-Tite # 65028 are very similar and will even install the same on your 2004 Chevrolet Silverado 2500. They also have the same weight capacity ratings of 500lbs tongue weight, 5,000lbs trailer weight and 9,000LB line pull. The only difference worth noting is the Curt is assembled in the USA. With that said I feel like the Curt is going to have the better quality.
  view full answer...