Detail K2 Snowplow for 2" Hitches - 88" Wide x 26" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
Part Numbers: K2AVAL8826,31108
Retail:$2,497.95
Our Price: $2,210.93
You Save: $287.02
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meDetail K2 Snowplow for 2" Hitches - 88" Wide x 26" Tall
part number: K2AVAL8826
Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. Remote-controlled electric winch lets you raise or lower the 3-position blade from your cab.
Features:
- Hitch-mounted snowplow lets you clear paved and gravel parking lots and driveways with your vehicle
- Electric winch raises and lowers plow with sturdy, nylon strap
- 2.4 GHz Wireless remote control allows you to operate the plow from the comfort of your vehicle
- In-cab switch serves as a reliable backup to the remote control
- Adjustable, 3-position blade can be manually angled left, right, and straight ahead
- Strong rubber deflector on top of plow directs snow down and away from your windshield
- Hardened steel edge breaks up packed snow and ice
- Skid shoes let you adjust plow height to scrape over gravel and uneven surfaces
- Shock-absorbing springs let plow tip forward on impact to protect you and your vehicle
- Can extend life of the plow if you hit an obstruction
- Blade stiffeners provide 2 additional points of contact between the plow and your hitch for a sturdy connection
- Red visibility markers help you see plow edges so you can steer away from obstacles
- Flip-down caster wheels allow you to roll the plow where you need it for mounting or storage
- Wheel height is adjustable to match your vehicle height
- Plow handle with knob lets you easily move plow up and down during mounting
- Safety chain holds plow in raised position during travel
- Reinforced, all steel construction has black, rust- and UV-resistant powder coat finish
- ISO certified
- Simple installation
- Slides into your vehicle's 2" front trailer hitch receiver
Specs:
- Application: 2" x 2" hitch receivers
- Cannot be used with hitches or receiver adapters that have built-in drops
- Blade dimensions: 88" wide x 26" tall
- 3 Blade angles:
- Left 45 degrees
- Straight ahead
- Right 45 degrees
- Distance from center of hitch pin hole to the front edge of plow: 50"
- Winch lift capacity: 3,000 lbs
- Weight: 296 lbs
- 1-Year limited warranty
The Detail K2 snowplow conveniently slides into your vehicle's front-mounted trailer hitch for fast, simple mounting. Easily raise and lower the plow from the comfort of your cab with the remote-controlled electric winch. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain.
Simple, Hitch-Mounted Installation
This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. A plow that attaches to custom-fit brackets ties you down to just 1 vehicle. But this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.
To install the snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver (sold separately). Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.
The snowplow comes with flip-down caster wheels that make the installation process even easier on you. Simply flip the wheels into position and you will be able to roll the plow into position for mounting or storage. The height of the wheels can also be adjusted to match the height of your vehicle.
How to Plow
Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, to the left, or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or a private roadway where piling the snow straight ahead would create a barrier.
The plow comes with a wireless remote that allows you to stay warm and out of the elements while still effectively controlling the plow. The remote operates on a 2.4 GHz frequency, allowing it to quickly send signals to the winch without experiencing delays. And because it's wireless, you won't have to run wires through your dash. Nor will you have to leave your window cracked open in the middle of a snow storm just so that you can run a wired remote into your cab. You will be glad to have it on those cold winter days.
To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the snowplow.
When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.
Easy Lifting with Electric Winch
The electric winch on this plow allows you to easily lift and lower the blade using the wireless remote control. If you prefer, you can also install the included in-cab toggle switch to control the plow. The winch uses a durable strap, which is much quieter than a chain, to raise and lower the plow.
Detail K2 Features
The snowplow features skid shoes that allow you to adjust the height of your plow. This allows you to efficiently plow over surfaces that are uneven, such as gravel roads.
Blade stiffeners, or blade support brackets, reinforce the connection between the plow and your vehicle. They add 2 additional points of contact with your hitch on either side of the plow's T-frame. This prevents stress on the frame and on your vehicle, while also strengthening the performance of the plow.
Shock-absorbing springs allow the plow to dip forward in the event that you hit an obstruction. This flexibility protects you and your vehicle from impacts.
AVAL8826 Detail K2 Hitch Mount Snow Plow - 88" Wide x 26" Tall Blade
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
part number: 31108
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
- Front-mount hitch provides attachment point for hitch-mounted accessories
- Winch, spare tire carrier, snowplow, cargo carrier and more
- No more blindly backing trailer in - just hook it up and drive it forward
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over steel resists corrosion
- Sturdy, square-tube design
- Assembled in USA
Specs:
- Line pull: 9,000 lbs
- Vertical load: 500 lbs
- Gross trailer weight: 5,000 lbs
- Receiver opening: 2" x 2"
- Pin hole diameter: 5/8"
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
31108 Curt Front-Mount Trailer Hitch Receiver
Customer Reviews
Detail K2 Snowplow for 2" Hitches - 88" Wide x 26" Tall - K2AVAL8826
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - 31108
Average Customer Rating: 4.8 out of 5 stars (115 Customer Reviews)
Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. Remote-controlled electric winch lets you raise or lower the 3-position blade from your cab. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.by: John03/30/2020
2004 Chevrolet Silverado
I had been waiting to find this Curt hitch on sale for a while.
First off I get to keep the hooks that came with my 2004 Silverado Crew cab 2500HD 4x4.
Then I removed two existing bolts and loosened a third on each hook.
Using a floor jack lifted the hitch into place and threaded in the new bolts through the frame and into the hooks.
The biggest problem I had was being able to reach the bolts into the side of the frame and hooks w/out removing the air dam.
Looks GREAT!!
I know some reviews have mentioned a reduction in ground clearance but my truck is not lifted and the clearance is nearly the same as the transmission skid plate installed by the factory.
I sometimes need to get low hard to see trailers into tight spaces and I’m also looking to pick up a winch. Looking forward to many years of hard work.
by: Dale Miles01/25/2014
Unbelievable how clean the install is for this product!! I was certain I would have to do some cutting or drilling, however not a single cut or new hole required. The product fit like it was straight from the factory ... even with the existing front Grille Guard that I have on my truck!!
I also appreciate the FAST shipping and customer service, as tracking info was emailed after the product shipped without requesting this info and the product arrived within the same week.
I've already recommended etrailer to other landscapers on lawnsite.com, as we're always looking for front-mount solutions for spreaders and other landscape equipment.
Dale M.
1/28/2015
I have to say that I absolutely LOVE this product!! It works perfect for mounting my walk-behind fertilizer spreader to the front of my truck while having the larger PermaGreen spreader on the back of my truck. Having this front-mounted hitch has allowed me to carry both of my spreaders and not sprain my back while wrestling the smaller spreader out of the bed of my truck as I had before.
by: Terry11/04/2021
This was possibly the easiest hitch install I've ever done! All the holes lined up, the onle thing was two of the bolts they supplied are not long enough,I had the longer bolts in stock and finished. I haul a truck camper so needed the extra cargo space, looks like it'll work!
there was 4 bolts in the kit to replace the bolts in the tow hooks, the 2 that went into the side where the ones that where too short, they where 1 3/4" I replaced them with 2 1/4" bolts. There was a gap between the hitch mount and the frame approximately 1/16" that a washer filled that gap. I'm a retired shop owner that did auto repair and fabrication so it was an easy install.
Jenny N.
11/8/2021
I will have our customer service team reach out to you. The hitch manufacturer prefers to have the hardware that comes with the hitch be used for warranty purposes.
by: Matthew05/10/2020
2006 Chevrolet Silverado
This was the easiest installation of the 10 or more hitches that I have installed. Four bolts out and replaced with four suppler bolts and washer. No modification of the air dam needed.
I needed some washers (supplied) between the frame and the receiver as spacers. I recommended that you figure out how many you need (1 or 2 per side), then lower it down and tape them in place to hold them in place and push the bolts through the tape after you lift it back in place.
Cover the ground with a rug or cardboard to keep from scratching the receiver when it’s on the ground before you lift it into place.
Matthew
5/11/2021
Still good. No corrosion or other issues.
by: Mike01/13/2024
2008 Ford F-150
Bought this DK2 plow in Jan 2023, and naturally we had no more snow the rest of the winter. Just got to use it last week after getting a foot of snow. Worked great, easier than I expected. The written instructions could’ve been a bit clearer on how to attach the assembled plow to the truck, but it was easy enough to figure out. Very happy with the purchase
by: Pat C.07/04/2020
I purchased the front hitch for my truck. With a fifth wheel I can’t carry bikes anywhere but the front. I really don’t trust the strength of the rear bumper on these RV’s. Hitch went on easy in the garage with no alterations needed. The bikes sit a bit high but that’s not the hitch problem....
I will also use it for other functions around the truck...push/re-locate utility trailer in tight spaces, use for a rack to haul stuff like firewood etc...when back hitch is unavailable.
by: David07/27/2022
Easy install; unobtrusive, but hitch receiver is far enough forward I can install the bike rack without needing an extension.
by: Wayne10/06/2022
Great product easy installation reinforces your front end will definitely buy again for my next truck
by: Hans11/09/2013
2003 GMCSierra
This is the second hitch I've ordered for my truck. This hitch was very easy to install on the front of my GMC Sierra and is almost unnoticeable, which I like. I use it to transport a small Honda Trail 90 motorcycle, and it's 9000lb rating is well above what I am asking it to do. It arrived via UPS several days after ordering, was in good shape, and only took ten minutes to install with only two different size socket wrenches. Highly recommend this unit for the front of any truck.
by: Charlie P02/08/2014
2004 GMC Sierra 3500
The 31108 Front Mount Hitch Receiver was a perfect match for my 2004 GMC Sierra 3500. I seemed well built and the instructions were clear and easy to understand. I installed the hitch in under 45 minutes and that includes prep time. No special tools required. See photo attached.
by: Chris12/22/2023
I waited 12 days for a shipment from amazon and the hitch was lost. They want to send me another hitch with a due date of January 6, 2024! You guys are the best! 2 day’s service was outstanding!!!
by: Chad 01/10/2023
2017 Ford F-350 Super Duty
Excellent for a home plow! Does the job but hard to use in heavy wet snow but good for the average snow fall
by: Alfred 12/28/2022
Fit great lineup no modifications happy with the results
Alfred
1/31/2024
Wonderful very satisfied with the sales department and the quality of the product
by: Bill Schmall 06/26/2014
I would add to your instruction, if you have the factory hooks, remove the four bolts as stated and give to customer, " loosen the other two bolts on the outside of frame" this gives you a little wiggle room to start the new bolts. BUT great product and great people.
by: Doug05/16/2020
This hitch mounted to tow hooks just as described, even with existing brush guard. Needed it to haul a generator the only issue was the brush guard stuck out too far so I had to buy a 12" extender. Now every thing works as planned. Shipping was fast and customer service was great.
Thank You
by: Chuck04/22/2024
You sent me the wrong part.
by: Brian02/22/2019
2006 Chevrolet Silverado
Very good quality, Heavy Duty hitch that looks easy to install.
Ian W was very helpful with my order and customer service has been great.
This hitch fits the Chevy Silverado 2500 and 3500 I believe. My Chevy is a 2006 model.
I highly recommend Curt hitches and ETRAILER.COM.
Brian
Brian
2/26/2020
The front hitch was easy to install and has been very useful. I just wished the 2006 Chevy Silverado had more clearance as far as height goes on the front end.Mine is a 4x4 but it could sure use a lift kit. The hitch is great though!
by: Rod S.09/09/2013
2005 Chevrolet Silverado
15 minute, piece of cake single-handed install. Instructions say cutting fascia optional on 2500. Not even close to needing to. Truck is 2005 Silverado 2500HD. Receiver sits up there nice and tight, so doesn't change ground clearances.
by: John 09/16/2023
Hitch is in excellent condition even though it tried to get out of the box.
by: Bill 10/15/2023
2003 GMCSierra
Repetitively easy to Mount and was still able to keep the factory toe hooks installed
by: Peter12/16/2022
I did not get a chance to put it on right away. Now that I have put the front hitch on , it looks great. It was harder getting the original old bolts off than it was putting on the hitch. The hitch went on quickly and now I can use it to put a plow on for these snowy Ohio winters.
by: Dave G01/15/2021
After I got the front hitch installed, the plow assembled and hooked up I spent a little time tweaking the skid plates to keep the plow just off of the gravel. Works great for our 100 yard driveway and parking area.
by: Rusty M03/25/2018
Chevrolet
Front hitch for 2005 Chevy 2500hd that I ordered from etrailer.com
by: Scott03/12/2023
I installed the hitch with no problems, looks great. The item was poorly packed for shipping and I consider myself lucky to see it arrive.
by: Bob 01/30/2023
Easy install, the bolts that went into the recovery hooks were about 1/2” short and couldn’t get the threads to bite
25
115
Show More Reviews Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
- Required Hitch Height of Detail K2 Snowplow for 2 Hitches 88 Wide x 26 Tall
- The Detail K2 Snowplow for 2" Hitches part # K2AVAL8826 will require a hitch height between 13" - 18". This is measured from the ground to the bottom of the receiver opening.
In regards to a 2005 Ford F-150, the Curt Front Mount Trailer Hitch Receiver part # 31352 will put you in range so that's what I recommend.
view full answer... - Front Mount Trailer Hitch fit for 2005 Chevy Suburban 2500
- The front mounted trailer hitch that fits a 2005 Chevy Suburban 2500 is the Curt Front Mount Trailer Hitch Receiver # 31108.
I checked with the manufacturer as well as going over our reviews and there is nothing regarding an issue with installing it on your engine size, as it has been confirmed to fit all models of '05 Suburban 2500.
There may be some fascia trimming required, but otherwise no major modifications needed. I have added a link to the installation instructions for you
view full answer... - Correct Curt Front Mount Trailer Hitch Receiver for a 2002 Chevy Suburban 1500
- The correct Curt Front Mount Trailer Hitch Receiver for a 2002 Chevrolet Suburban 1500 is part # 31302, part # 31108 is for 2500 models and they are not cross compatible.
view full answer... - Front Mount Trailer Hitch Receiver Options for a 2000 Chevrolet Silverado 2500 HD 4x4
- If your 2000 Chevy is a C/K series then you will want to use part # 31042 for Curt or part # 65005 for Draw-Tite but if your truck is the Silverado version then you will want to use part # 31108 for Curt or part # 65028 for Draw-Tite.
All of the above trailer hitches have a 2" receiver tube opening with a vertical line pull rating of 9,000 lbs and a vertical load rating of 500 lbs.
I have attached an installation video of the Curt Silverado hitch installed on a similar 2003 Chevy
view full answer... - Front Mount Hitch for a 2002 GMC Sierra 2500HD for using a Fisher Minute Mount Plow
- The Curt front mount hitch, part # 31108, will fit your 2002 GMC 2500. It provides a standard 2 inch receiver opening, so if that is what the Fisher plow needs, you should be set. I would double check with Fisher or the plow instructions to make sure what kind of attachment it needs.
The hitch has a tongue weight capacity of 500 pounds and a gross load capacity of 5,000 pounds. I have added a link to the instructions below.
view full answer... - Front Hitch Recommendation for a 2010 Chevy Silverado 1500
- We carry a front hitch for your 2010 Chevy Silverado 1500 for that you would want, part # 65052. This hitch has a line pull capacity of 9,000 lbs and a tongue weight capacity of 500 lbs so as long as you stay under that you will be just fine.
view full answer... - Which Front Hitch Fits a 2006 GMC 1500 Sierra
- Sounds like you have a 1500HD and the correct Curt hitch you need is the part # 31108 and not the part # 31302 which is for the 1500LD trucks.
view full answer... - Front Receiver Hitch Vertical Load Ratings for 2004 Chevrolet Silverado 2500HD
- Currently the only front receiver hitch's available have a 500lb maximum vertical load.
The Curt Front Mount Trailer Hitch Receiver # 31108 has a maximum 500lb vertical load, 5,000lb trailer weight and 9,000lb line pull rating.
Draw-Tite Front Mount Trailer Hitch Receiver # 65028 has a maximum 500lb vertical load, 5,000lb trailer weight and 9,000lb line pull rating.
view full answer... - Width of Curt Front Mount Trailer Hitch Receiver # 31108
- I went out to the warehouse to look at the Curt Front Mount Trailer Hitch Receiver # 31108 referenced in your question. I measured a total width of 35 inches at its widest point, where the mounting brackets angle outward. The crosstube itself measures 28-1/2 inches wide.
If you have the 2006 GMC Sierra 1500 HD Series, this front mount hitch is confirmed to fit and will work well. It will provide a 2 inch receiver opening and a vertical load capacity of 500 pounds. I have included the
view full answer... - Front Mount Hitch Fascia Trimming Required for a 2003 Chevrolet Silverado Duramax
- All of the front mount hitches for the 2003 Chevrolet Silverado may require trimming of the black plastic fascia, that is mounted under the front bumper of your truck, depending on how the front bumper is mounted to the frame on each individual vehicle.
Since you have a Duramax engine in your truck, you most likely need a front mount hitch that will fit a 2500 or 3500 series pickup. The Draw-Tite Front Mount Trailer Hitch Receiver, item # 65028, for the 2500 and 3500 series trucks does
view full answer... - Availability of Front Mounted Hitch for 2006 GMC Sierra
- The Curt Front Mount Trailer Hitch part # 31108 is a confirmed fit for your 2006 GMC Sierra and will provide a fit for your 2 inch hitch-mounted bike rack. I have included instructions for the proper installation of this front-mounted trailer hitch.
You may find some issues with a front mounted bike rack however. Visibility may be an issue. In addition, the fully-loaded bike rack may block the head lights and/or license plate. Finally, the bikes may block airflow through the grille,
view full answer... - Will Curt Front Mount Trailer Hitch # 31108 Fit a 2002 GMC Sierra 1500HD
- According to Curt Manufacturing, the Front Mount Hitch, # 31108, will fit your 2002 GMC Sierra 1500HD. I have included a link to the installation details for this hitch. Another front mount trailer hitch that will fit is Draw-Tite Hitch, # 65028. I have included a link to the installation instructions for this hitch as well.
view full answer... - Is Fascia Trimming Required for Front Mount Hitch Installation on the 2005 Chevy 3500
- The directions state that Fascia trimming is optional on 2500 H.D./ 3500 models. This means that when the front mount hitch, item # 31108, is installed the bottom of the receiver tube will contact the air dam under the front bumper of your 2005 Chevrolet 3500 pickup. This contact over time will wear on the air dam, so you may decide to trim it a bit before installation of the hitch. Otherwise the hitch install is a direct bolt on installation with no drilling required.
My recommendation
view full answer... - Will Curt Hitch, # 31108, Fit On A 2007 Chevy 2500 HD And Hold A 250 Lb. Dirt Bike
- The Curt Front Hitch, # 31108, has a 500 lbs. tongue weight capacity. The hitch will carry the 250 lb. dirt bike, but you will want to check what the front Gross Axle Weight Rating (GAWR) is on your 2007 Chevy 2500 HD. You will not want to exceed the Gross Axle Weight Rating for your vehicle.
We have the etrailer Motorcycle Carrier for 2 Inch Hitches # e98873, that has a 500 lbs. weight capacity. Also we have the Erickson Motorcycle Tie Downs, # EM05729.
I am sending a link to the
view full answer... - Which Curt Front Hitches Fit LD Version of 2002 Chevy Silverado
- If your 2002 Chevy Silverado LD is a 1500 model the Curt Front Hitch you need is the part # 31302. If it's a 2500 LD the Curt front hitch you need is the part # 31108.
view full answer... - Install Curt Front Mount Trailer Hitch Receiver, # 31108, on 03 GMC 2500 Yukon XL with skid plates
- On the Curt Front Mount Trailer Hitch Receiver, # 31108, there is minor fascia trim required when installing on 2003 GMC 2500 Yukon XL. As far as the fitment on your vehicle with the skid plates istalled, I checked with the supplier (Curt), they said they have not heard of any problems of them fitting with factory skid plates, but if the skid plates were a dealer installed item, which is an aftermarket item, they would not know because they do not test their fitments against aftermarket
view full answer... - Cargo Carrier for Front Mounted Receiver on 2005 Silverado to Carry Chest Freezer Full of Elk
- What are the dimensions of the freezer you're asking about?
The standard railed carrier, like the Pro Series # 63153 measures 24x60. For something a bit narrow and longer at 49x 22-1/2, take a look at the Curt # C18113. Both carriers have a 500 lb capacity, but keep in mind that the weight of the carrier plays into the tongue weight as well. The carrier, the freezer and the meat in the freezer couldn't weigh more than 500 lbs.
You should also consider that carrying a freezer on the
view full answer... - Front Receiver Hitch for a 1989 Chevy K1500 (4x4)
- We have a couple of options for front mount hitches that will fit your 1989 Chevy K1500. First we have # 65005. With this hitch drilling is required for installation but it costs less than the other option.
That other option is Curt hitch # 31042 which does not require drilling. Either hitch is rated for 9,000 pounds line pull and 500 pounds vertical load (tongue weight). I have included links to the installation instructions for both hitches for you.
view full answer... - Recommended Front Mount Hitch for 2007 Chevy Silverado Classic 3500
- For your 2007 Chevy Silverado Classic 3500 we have both the Curt # 31108 and the Draw-Tite # 65028 front mounted hitches that are confirmed to fit. Between these two options I recommend the Curt # 31108 because it's made right here in the USA. If you happen to be in the market for a front mount hitch so you can attach a snow plow, then you can also rest easy in knowing that Curt actually works with the major snow plow manufacturers to make sure their front receivers are at the appropriate
view full answer... - Will a Swagman XTC-4 Trailer Hitch Mount Bike Rack Fit a Front Mount Hitch on a 2005 Chevy Silverado
- You will need to measure from the center of the hitch pin hole out to the distance required to clear the front of the vehicle. If that distance is less than 3 inches, the Swagman XTC-4, # S64665, will clear when folded up.
Having 4 bikes on the front of the vehicle on this rack would extend the length of the vehicle by 45 or so inches. It will severely limit the amount of the road the driver will see especially since the rack angles up the further away from the vehicle it is. It will
view full answer... - Hitch Receiver Recommendation for 2002 GMC Sierra 1500
- One option for a hitch receiver that has been confirmed to fit a 2002 GMC Sierra 1500 with standard bumper is the Curt Class IV Custom Fit 2" Hitch Receiver, # C14332. This hitch offers bolt-on installation with no drilling or welding required.
I have attached a link to all of the hitch receivers available for the 2002 GMC Sierra. From this link you can choose your vehicle style to narrow down the search to the receivers that are available for your specific vehicle.
I spoke with my
view full answer...
Info for these parts were:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Written by:
Lindsey S
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
John
3/31/2021
This has made getting trailers parked closely and out of the way at job sites so much easier. Whish I hed it years ago!