1996 Toyota Tacoma Roof Rack by Inno
Roof Rack Includes:
Inno Square Crossbars - Steel - Black - 50" Long - Qty 2
Inno Feet for Square Crossbars - Raised Side Rails - Black - Qty 4
Part Numbers: INB127,INFR
Retail:$337.91
Our Price: $274.46
You Save: $63.45
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Inno Square Crossbars - Steel - Black - 50" Long - Qty 2
part number: INB127
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your Toyota Prius. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
Features:
- Square crossbars let you build a roof rack for your vehicle
- Pair with Inno feet and custom fit kit to create a complete roof rack
- Standard square bars provide exceptional load support
- Clamp-on carriers and accessories conveniently wrap around bars
- Elastomer coating helps to prevent rust and cushion your load
- Endcaps keep out dirt and water
- Hardened steel construction is strong and durable
- Black color
Specs:
- Quantity: 2 crossbars
- Weight capacity: 220 lbs
- Always observe your vehicle's maximum roof load capacity
- Dimensions: 50" long x 7/8" tall x 1-1/4" wide
- Limited lifetime warranty
IN-B127 Inno Standard Square Steel Load Bars - 50" Long - Black
Item # INB127
Inno Feet for Square Crossbars - Raised Side Rails - Black - Qty 4
part number: INFR
Durable feet help mount 2 Inno square bars to your vehicle's raised side rails. Rubber-coated steel straps wrap around rails and tighten with cam-action handles. Locking covers secure feet to side rails.
Features:
- 4 Feet let you mount Inno square crossbars to your vehicle's raised side rails
- Pair with 2 crossbars (sold separately) to create a complete roof rack
- Rubber-coated stainless steel straps secure feet to your raised side rails
- Straps wrap around rails, hook into bottoms of feet, and tighten with cam-action handles
- Rubber coating on straps protects rails from scuffs and scratches
- Locking covers secure system to your roof
- 2 Keys included
- Durable, weather-resistant AES plastic construction
- Black color
- Limited lifetime warranty
Specs:
- Weight capacity: 110 lbs
- Always observe your vehicle's maximum roof load capacity
- Limited lifetime warranty
Pair these feet with 2 Inno square crossbars to create an aftermarket roof rack for your vehicle with factory raised side rails. The feet install with no tools, and include locking covers to secure the system to your roof.
Easy Attachment to Crossbars
To install a foot, remove the cover on the end of the crossbar and slide foot over the bar. Tighten the foot onto the bar with the cam-action handle.
Tool-Free Installation
The Inno feet install easily with no tools required. Just wrap the stainless steel straps around your raised side rails and hook them into the bottoms of the feet. Then use the cam-action handles to tighten the straps on your rails. The rubber-coated straps and pads on the bottoms of the feet grip your vehicle's rails while also helping to prevent scuffs and scratches.
Locking Covers
A locking cover on each foot secures the system to your raised side rails. Simply slide the cover into the guide holes on the foot, then use one of the included keys to lock the cover.
IN-FR Inno Roof Rack Stays for Raised Side Rails - Black - Qty 4
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Inno Square Crossbars - Steel - Black - 50" Long - Qty 2 - INB127
Inno Feet for Square Crossbars - Raised Side Rails - Black - Qty 4 - INFR
Average Customer Rating: 4.7 out of 5 stars (551 Customer Reviews)
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars. Durable feet help mount 2 Inno square bars to your vehicle's raised side rails. Rubber-coated steel straps wrap around rails and tighten with cam-action handles. Locking covers secure feet to side rails.by: LD05/14/2023
Got it for a 2006 Toyota Prius. Overall a great purchase. It was sturdy and never had any major issues. I would 100% recommend getting the locks.
I almost gave it 4 stars for one reason. If you put it on as the instructions tell you to, it whistles really loud. It just takes a bunch of small iterations and quick drives down the street to find out if it stopped making noise. Other than that, great purchase.
by: Kat11/30/2021
Ordered a full (naked) roof rack package with snowboard/ski attachment. Items arrived as described. Set-up was simple and flawless. Instructions are fairly clear & simple. A paper tape measure is included. No issues with fitment.Purchased the fairing to reduce wind noise and it works perfect! No excessive wind noise whatsoever -- can open sunroof comfortably if I wanted to. Have not yet put my snowboards inthe attachment yet, but do not foresee any issues. Roof rack is on a 2015 Infiniti Q40 (G37 sedan 2009-2015).
by: Andrew04/25/2023
The roof racks have been great. I've used them with j-hooks and rear loading slider type pads. They are easy to install/remove. In the picture is my 17ft long sea kayak that stayed secure and safe on a 6 hour journey in high winds using the racks.
by: Joey05/20/2022
Fast delivery and great communication about tracking. Easy to follow instructions. Great fit and looks. Thank you.
by: Chris02/08/2023
Great cross bars to replace the rusty original cross bars this vintage Thule rack. Classic cars require these old style racks and many are 30+ years old and great to be able to give new life to an old rack system.
by: Reanna05/04/2019
2010 Dodge Caliber
Awesome product. I’ve been looking for a while to find custom fit roof racks for my 2010 Dodge Caliber. the dealership told me I would have to drill them right to my car and the labour would’ve cost me a fortune. I’m so extremely happy that I found etrailer that had exactly what I was looking for! No drilling, and no hassle! The instructions were easy to follow and the assembly went smoothly ! Fast delievery and great customer service. I would 10/10 recommend etrailer to anyone who is looking for durable, stylish looking roof racks for a great price!
by: Chad K.03/07/2021
For a roof with no mounts, this is a perfect choice!
The fitment selected for me by etrailer.com for my 2012 Ford Escape was perfect. The Inno Rack System is easy to install (made easier by the use of etrailer.com's instruction video links).
I chose the square bar fitment because I prefer the look over the various "aerodynamic designs", while I prefer the look over others, a wind fairing will prove to eliminate the very hint of sound that does emanate into the cabin.
If you are looking for a Clamp mounted system that requires zero modification/easily removabl this is the system for you.
by: James03/12/2022
I've had Thule bars on my cars for +30 years (Honda, Toyota and Subaru) using both fixed point and clamp on foot packs. This side rail set is better than any Thule branded foot pack I've used. Still using the same square Thule bars I've had since the 1990s. Everything just went together without any fuss. From out of the box to onto the car took 15 minutes. Wanted to add a photo, but the "add photos" button isn't working.
by: Lonnie02/18/2019
I’ve had this roof rack system for about a year now and it has worked consistently well for the entire 12 months and I believe will continue to work well for me for the for seeable future. I gave it four stars initially and four stars now because I do think the fit and finish of the system could be better. That’s not a dealbreaker for its function because it’s excellent in doing the work it’s designed to do but it just isn’t the prettiest.
Great rack, buy it... it will work hard for you.
Picture provided features Curt basket with Rino Bedliner treatment.
by: Jason05/08/2021
So far so good! Was fairly easy to install. I will say the straps that came with it are not quite long enough for my kayak’s. Not an issue for me though. Overall I am definitely satisfied and would recommend for anyone that needs a rack for kayaks.
by: Linda S07/20/2021
This product exceeded my expectations. I purchased these with the INNO square crossbars and they fit my 2014 Explorer perfect!! Extremely easy to install took about 15 minutes. Very sturdy- I will be hauling my two paddle boards and have no doubt they will travel well! I highly recommend this product.
by: Shawn03/25/2018
Toyota 4Runner
Just installed the etrailer inno square load bars on my 4Runner. I also purchased the Round/square Crossbar Fit Kit .
Looks great and mounted easily to my Prinsu Rack.
by: Brian10/21/2023
This car roof rack cross bars were easy to assembly. Attaching the cross bars to the car takes a little patience to ensure that the cross bars are centered on the car, the correct distance from the center of the front & rear doors and parallel. But going through it once it is easy to repeat. I have sued the carrier once to haul 13 2x4 lumber no problems.
by: H. B.08/21/2017
First and foremost… YES! I would recommend this product to anyone, so def. read further. Price wise… well below what the more known name brands wanted for a similar setup. Product is well made , but if I had to point out one defect… the rubber shoe the rests between the factory roof bar and the inno feet detaches easily during install (see photo). I will figure out how to securely attatch it when I remove it, because (IMO) it's not one of those units that remains on perminantly.
by: Tom Burger05/23/2021
I followed directions and the rack went on without a hitch. The measuring tape provided was a bit confusing but my tape measure did just fine. It pays to watch for any movement of the stays as you tighten them. It fit perfectly. I was impressed with the quality of the unit. The torque wrench provided was a nice bonus. I attached a boat rack for my rowing shell and I’m confident it will be safe all the way to the water.
by: Hannon07/25/2019
We needed a set of crossbars for our vehicle and read many reviews of other brands before finding this product. We like the bars and the installation of them. We needed something trustworthy to accomodate our rooftop tent and this fit our needs. We experienced excellent customer service!
by: 04/23/2024
2008 Kia Optima
Been a month haven’t received them yet they are in stock but guess we are waiting for one item which it’s in stock date gets pushed back every day. And the company doesn’t let the customer know the date changes or when they will send it.
by: Eric08/05/2021
I'm very happy with the purchase. I wasn't sure about spending this much money on something that might not work well. After using it, I'd gladly purchase again for a different car.
Fit well on my car, was very solid and secure. Did not do any damage to the paint on my roof.
Installation is pretty easy - be sure to watch the video and follow the instructions for measurements to set bases to. I could see it being a nightmare to install without those measurements.
The kit also comes with a tightening handle that has a built in torque setting. It's not shown in the video, but a good idea to use so you're sure everything is tightened properly.
Fuel economy suffers about 10-15% with the racks on - even empty. I take them off when I don't need them. I marked the bottom surface of the bars with a paint marker so I know where to put the bases when I put them back on. I also painted on the measurements from the door post so it's easier to reinstall.
Also, an item was missing from the box. etrailer customer service was fantastic about getting me a replacement part.
by: Anton09/02/2018
2015 Acura TLX
Great product. Easy to install. This is one of three parts needed for a complete roof rack installation. Here is a photo of the finished installation on my 2015 Acura TLX sedan.
by: David 03/26/2023
Haven't installed yet but can tell from inspection that the design is excellent and confident it will suit my purposes from reading others reviews. So glad Inno is making these parts so I can utilize my old square bars, racks, and accessories.
by: Erin 07/29/2023
These feet are very easy to use, install, and uninstall on my van (Toyota Sienna). I've had them a year and used them many times, and they seem quite durable. With the long bars, I can put 2 canoes on the roof of my van for trips. I'm very happy with the feet and bars, they're a great value compared to other brands of roof racks, and I would definitely buy them again.
by: Blah Blah Blah Motorcycles04/08/2024
Easy to install and sturdy for the roof basket that was installed as well. Zero problems for the miles driven and the load on top.
by: Walter04/11/2019
Hi, awesome roof rack, I took me a while to find it. Like the design and so far so good, still looks like new
by: 12/11/2023
The bars could be longer because you cannot attach two sets of attachments, otherwise they are fine
by: Andres11/05/2021
I'm loving the roof rack , and Ashley from customer service was really helpful. Thanks e trailer. The reviews didn't lie.
25
523
Show More Reviews Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?
- 2015 Volkswagen Passat Parts for Inno Square Bar Roof Rack
- To fit the 50" Inno Square Crossbars # INB127 on your 2015 Volkswagen Passat you also need the following:
Feet - # INSUT
Fit Kit - # INK591
Attached is an installation video of this roof rack on a 2015 Passat for you to reference. If you let me know what you're planning on using the roof rack for I'd be more than happy to make some recommendations for you!
view full answer... - Does Inno Square Bar Roof Rack Fit 2018 Nissan Versa Note Hatchback
- Yep, you are on the money with the parts you need for an Inno square bar roof rack to fit your 2018 Nissan Versa Note:
- Inno Square Crossbars # INB127
- Inno Feet for Square Crossbars # INSUT
- Custom Fit Kit # INK421
Then to carry your surfboards I recommend the Inno Board Locker Surfboard Carrier # INA744.
I really like this carrier because of how simple it is to use and how well it keeps your surfboards secured on your rack. I've added a link to a video review for you to
view full answer... - Recommended Roof Rack for 2010 Dodge Caliber
- I recommend using the Inno Roof Rack Kit for Dodge Caliber that uses parts # INB127, # INSUT, # INK555 which will give you a nice roof rack at a good price. The Inno kit uses durable square crossbars and will attach to naked roofs to provide you with a solution that allows you to carry cargo carriers, ski racks and bike racks, plus a variety of other roof rack mounted accessories.
I've linked a short review and installation video of this kit for you to check out.
view full answer... - Roof Rack for 2010 Toyota Corolla Similar to Thule Square Bar Rack
- Thule stopped offering the fit kit you mentioned for your 2010 Toyota Corolla which means that while we have other great roof racks that can be installed on your vehicle we do not have any Thule options.
For a rack that is very similar to the Thule square bar racks we have the Inno part # INB127, # INSUT, and # INK593 that fits your vehicle. This rack actually has the exact same crossbar dimensions as the Thule square bars but at a much better price.
view full answer... - Inno Square Bar Roof Rack that Fits 2017 Ford Fiesta Sedan
- For a square bar Inno roof rack that fits your 2017 Ford Fiesta 4 door sedan you'd want the part numbers # INB127, # INSUT, and # INK872 instead actually. This will fit much better than the Sportrack you tried.
view full answer... - Roof Rack And Cargo Basket Recommendation For 1993 Toyota 4Runner With Naked Roof
- If you have a 4-door 4Runner I recommend The Inno roof rack as well. This roof rack does not use the short roof adapters. To order this roof rack you will need part # INB127, part # INSUT, and part # INK160.
If your 4Runner is a 2-door the roof rack I recommend is the Inno roof rack. This comes with a custom fit kit that is designed for the roof of your Toyota. This roof rack includes locks to help secure the roof rack on the roof of your Toyota. For a 2-door the roof rack also includes
view full answer... - Will Inno Square Roof Rack for 2016 Honda CR-V Carry Two Kayaks
- For your 2016 Honda CR-V the Inno Roof Rack part numbers # INB127, # INSUT, and # INK413 is a confirmed fit and would be a really great choice to carry a couple kayaks like you mentioned. This uses door frame clamps to secure the rack to the vehicle roof which is a very solid place to attach to. The roof of a vehicle is reinforced quite a bit for safety reasons and even more so at the door frame.
Then to carry the two kayaks the # TH830 would be a great option as well as it can carry
view full answer... - Cost Effective Option To Carry Two Kayaks On a 2013 Toyota Camry
- In order to haul two kayaks on a 2013 Toyota Camry you will need a roof rack and side carrier. The reason you must use a side carrier is because this is the only way that they will both fit. I recommend the Inno Square Crossbar System part # INB127, part # INSUT, and part # INK872 for the roof rack and the Inno Kayak Carrier w/ Tie-Downs part # INA455 for the kayak carrier.
I understand this may be more than you are looking to spend but this is one of the most cost effective options
view full answer... - Will Inno Square Bar Roof Rack Fit 2015 Honda Fit and Work Well to Carry 2 Kayaks
- The Inno Square Bar Roof Rack # INB127, # INSUT, # INK876 that you referenced is confirmed to fit your 2015 Honda Fit.
This roof rack uses custom fit pads and clamps to provide a secure fit for the roof rack on the naked roof of your Fit. The clamps are designed specifically to fit the curves of your vehicle's doorjambs.
The molded pads that install on the bottom of the roof rack feet help to protect your roof from scratches and abrasions. Anytime an accessory installs with direct
view full answer... - What Roof Rack do You Recommend for My 2013 Toyota Prius with a Naked Roof?
- For your question, I am assuming you are looking for a roof rack setup on your 2013 Toyota Prius with a naked roof. For a great recommendation that will give you the highest weight capacity for your roof, I suggest the following parts:
- Inno Square Crossbars - Steel - Black - 50" # INB127
- Inno Feet for Square Crossbars - Naked Roofs - Black # INSUT
- Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet # INK865
With this setup, you will get up to 140 pounds of maximum
view full answer... - Are Inno Square Crossbars # INB127 Sold in Pairs
- Yes, the Inno Square Crossbars # INB127 are sold separately and with this part number you get a pair of them
view full answer... - Parts Needed to Install Inno Square Crossbars on 2008 Mazda CX-9 with Naked Roof
- Inno crossbars are 7/8 inch tall and 1-1/4 inch wide so the dimensions you referenced would not work with the Inno feet part # INB127. Only option I have for your 2008 Mazda CX-9 that uses the foot kit part # INB127 is with the other part numbers # INXP and # INTR124.
view full answer... - Economical Roof Rack Recommendation for 2014 Honda CR-V With Naked Roof
- The roof rack I recommend for your 2014 Honda CR-V with a naked roof is from Inno because it is the most economical option as well as highly functional and safe. The rack consists of:
- Inno Square Crossbars # INB127
- Inno Feet for Square Crossbars # INSUT
- Custom Fit Kit for Inno # INK413
These are 50 inch square crossbars that are made of steel, have an elastomer coating to prevent corrosion and come with a lifetime warranty. Since you mentioned you wanted to leave the rack
view full answer... - 2020 Accord 4dr Sedan Inno Rack Bar Spread
- The 2020 Honda Accord Roof Rack by Inno has a bar spread of 26 1/4". It consists of the following;
Inno Square Crossbars - Steel - Black - 50" Long - Qty 2, part # INB127, the
Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4, part # INSUT, and the
Custom Fit Kit for INSU-K5 Roof Rack Feet K710, part # IN95FR.
This roof rack has a weight limit of 120lbs. With the square crossbars you can attach any accessories that clamp to crossbars. This rack has locking torque knobs
view full answer... - Square Bar Roof Rack and Compatible Kayak Carriers for 2008 Honda Fit Sport
- For your 2008 Honda Fit with a bare roof the Inno 50-inch square bar roof rack made of parts # INB127, # INSUT and # INK219 is a confirmed fit and will give you a sturdy cost-effective platform for transporting your two 50-lb kayaks. This rack has a 120-lb maximum weight rating and 28-inch bar spread.
We have lots of choices in kayak carriers that fit on these square Thule crossbars and these appear on the linked page. You might care to check out the linked article on watersport carriers
view full answer... - What Size Wind Fairing For 50 Inch Inno Square Crossbars
- For the 50 inch Inno Square Crossbars # INB127, what you'll want to use is the 40 inch wind fairing, which is the following part number:
- Inno Fairing for Roof Racks # INA261
Really smart choice going with a wind fairing for square crossbars, as it will really help cut down the wind noise, particularly at higher speeds.
view full answer... - Will Inno Square Bar Roof Rack Fit 2018 Toyota Highlander LE Plus
- The Inno Square Crossbars # INB127 referenced in your question will work great on your 2018 Toyota Highlander LE Plus as long as it has a naked roof (no existing side rails or crossbars). To complete the roof rack you will just need # INSUT for the Inno Feet and # INK666 for the Custom Fit Kit. This will give you a very nice, sturdy roof rack system with a weight capacity of 220 pounds.
If your Highlander has flush mounted rails on the roof that run front to back, you will instead want
view full answer... - Recommended Roof Rack Compatible with 2011 Chevy Malibu
- I reached out to my contact at Thule and the TH400XT feet were only compatible with Chevy Malibu models up to 2007.
For your 2011 Chevy Malibu, I recommend the Inno square bar roof rack which consists of the following parts:
- 50" Crossbars # INB127
- Square Bar Feet # INSUT
- Fit Kit # INK572
view full answer... - What Crossbars System do You Recommend for Transporting a Kayak on My 2019 Prius Prime?
- I have a great roof rack that works for you. When you say that you do not have a sunroof, I am assuming you mean that you do not have a glass roof. In either case, the SportRack Semi-Custom Roof Rack # SR1005 does not fit your 2019 Toyota Prius with a bare roof with or without a glass roof. We also do not carry any SportRack crossbars systems that are designed to fit your vehicle.
If you do not have a glass roof, I recommend the following roof rack system:
- Inno Square Crossbars
view full answer... - Roof Rack for a 2017 Fiat 500X with Sunroof
- The Square Bar Inno Kit is a confirmed fit for your 2017 Fiat 500x with the sunroof. You'll want to verify your vehicle's roof capacity with your owner's manual or manufacturer prior to loading anything onto the roof bars. Sunroofs tend to have a lower overall capacity.
This kit consists of:
Inno Square Crossbars, 50 Inches, part # INB127
Inno Foot Pack for Square Bars, part # INSUT
Inno Fit Kit for Fiat 500X, part # INK482
view full answer... - Inno Square Bar Roof Rack for 2003 Mercury Mountaineer
- In order to get the longer bars, you'd order the parts separately. You'd need the roof rack feet, part # INFR and the # INB147. There won't be a cost difference by ordering the feet and crossbars separately.
You might also be interested in a fairing like # INA260 would make the rack more aerodynamic, reducing the wind noise.
I've linked you to some product description videos for some of the parts I mentioned.
view full answer... - Can Old Thule Square Crossbars Fit 2021 Toyota 4Runner With Raised Side Rails
- You can use your old Thule square crossbars on your 2021 Toyota 4Runner (assuming they are wide enough), and what you can use are Inno roof rack feet because Inno square crossbars are the same size as the Thule, so what you will need is the following:
- Inno Feet for Square Crossbars - Raised Side Rails # INFR
view full answer... - Roof Rack Fits for 2009 Kia Borrego with Raised Factory Roof Siderails
- The roof rack systems we offer for your 2009 Kia Borrego are intended to attach to factory-installed side rails that run front-to-back on the roof. I reviewed many photos of your vehicle and the side rails appear to be quite similar in size to those commonly found on other vehicles. Please refer to the linked photo of a 2009 Borrego.
All of the roof rack systems made for your car are shown on the linked page. These include racks from Inno that use one of three different attachment components
view full answer... - Roof Rack for a 2016 Subaru Forester with Raised Side Rails and Thule Roof Bike Racks
- SportRack doesn't have a roof rack that will fit but I do have an even better roof rack that will fit the side rails on your 2016 Subaru Forester. And it does not cost much more. So what in need is the Inno roof rack # INB117 for the bars and # INFR for the feet.
The bars have the same dimensions as the Thule bars so your bike racks will fit. It also comes with locks and has a limited lifetime warranty.
view full answer... - Availability Of Replacement Set Of Keys For An Inno Roof Rack
- It looks like you are looking for a replacement key for an Inno roof rack. While we do not carry a 1254 key from Inno, we do have a T254 key # IN43RR. Is it possible the number 1 on your key is actually a letter "T"? If so, the # IN43RR will be the correct key for you.
view full answer... - Inno Square Bar Roof Rack for a 2016 Chevy Trax with Factory Side Rails
- The Inno feet # INFR are a fit for the 2016 Chevy Trax if it has factory side rails that run front to back on the roof. If you have a different roof configuration let me know.
The bars that are recommend for the Trax that also work with these feet are the 42 inch bars # INB107.
view full answer... - Parts Needed to Install Longer Crossbar Roof Rack on 2020 Toyota Sienna
- I have a 54 inch crossbar solution from Inno that will work great on your 2020 Toyota Sienna but since the tracks on the bottom of the aero Inno bars that attach them to the rack feet only goes so far across the bar you can't go with longer bars in this style than what's recommended. However the square bar roof racks from Inno attach in a way that does not limit the length of the bars at all. So you could install the 54 inch square bars part # INB137 on your 2020 Toyota Sienna but you'd
view full answer... - What Feet Can I Use with My Older Thule Square Crossbars on My 2008 Volvo XC70 with Raised Rails?
- If you have older Thule square load bars that do not have the bottom channel, there is a way to use a different manufacturer's feet with your 2008 Volvo XC70. For that route, I recommend using the Inno Feet for Square Crossbars # INFR. These feet are designed to fit Inno square bars that measure 7/8" tall x 1-1/4" wide. Since the Thule square load bars have these same dimensions, you can use the Inno # INFR on your vehicle's raised rails. We've had dozens of neighbors who have used this method.
view full answer... - Inno Roof Rack Recommendation for a 2011 GMC Acadia with Factory Side Rails
- That is a good looking vehicle! I checked with Inno and I am happy to report that foot pack # INFR will fit the raised side rails on your 2011 GMC Acadia. There is also a silver set if you prefer, # INFR-6. For the crossbars that will fit the feet and your Acadia use # INB117.
view full answer... - Can 4 Bikes Be Loaded Onto The Thule SquareBar Crossbars On A 2018 Subaru Forester?
- I can't personally see anything wrong with doing that, however the only thing I can think of that you'd need to be aware of is the total weight being loaded.
As long as your bikes are not exceeding the maximum weight capacity of your crossbars, and you have enough room there should not be an issue.
.
view full answer... - Recommended Inno Roof Rack Feet For A 2020 Mazda CX-5 With Flush Mounted Rails
- Since your 2020 Mazda CX-5 has flush mounted rails the Inno Feet for Square Crossbars # INFR you referenced wouldn't be able to slip under the rails for mounting. Instead, I recommend the Inno Through Feet for Aero Crossbars - Fixed Mounting Points - Qty 4 # INXS350 and Custom Fit Kit for Inno Roof Rack Feet # IN53FR.
These two components will allow you to install some Inno Aero Crossbars # INXB115-123 so that you can complete your roof rack. I've attached a short video below where
view full answer... - Will Inno Feet for Square Crossbars Work on 2012 Nissan Xterra with Raised Side Rails
- Yes, I checked with Inno and the Inno Feet for Square Crossbars part # INFR will fit a 2012 Nissan Xterra with raised side rails. If you also need the crossbars, you'd want to use the Inno Square Crossbars part # INB137.
view full answer... - Is There a Way to Use Older Thule Square Bars on a 2013 Subaru XV Crosstrek with Raised Side Rails
- Yes, we do have the feet/mounting points to use older Thule Square bars on your 2013 Subaru XV Crosstrek with factory side rails. But, the feet are not from Thule, they are actually Inno feet. This is because the Inno Square bars are the same dimensions as the older Thule Square bars, allowing the Inno feet to work.
- Inno Feet for Square Crossbars # INFR
You will want to make sure your older Thule Square bars are long enough. They need to be at least 50" long.
view full answer... - Can I Put Thule Square Crossbars On My 2018 Subaru Outback Limited Wagon?
- We do have a square bar roof rack system that will fit your 2018 Subaru Outback Limited with factory raised rails. For the Towers you will want the Thule Evo feet # TH710601. For the fit kit it will be part # TH37CE.
Please note that only the new Thule square bars will work with this setup. The new bars have a channel in the bottom of the bar, and the feet attach to the bottom of the bar. Old Thule square bars do not have this channel on the bottom and cannot be used with the new Evo
view full answer... - Inno Square Crossbar Roof Rack that Fits 2008 Nissan Xterra
- Inno does have a roof rack that fits your 2008 Nissan Xterra that uses the # INFR you mentioned. You need just the # INFR and the # INB107 and you'd be set.
view full answer... - Will Inno Square Bar Feet Work with Older Thule Square Bars
- Yep! The current Inno square bar feet # INFR do work with the older Thule square crossbars since the two square bars are identical in dimensions.
view full answer... - Roof Rack Feet for 2019 Ford Expedition that Can Fit Thule Square Bars
- Inno square bars are exact same dimensions as the Thule crossbars so what you could use is the Inno Feet for Raised Rails part # INFR which fits the raised rails of your 2019 Ford Expedition and you'd be set. Normally you'd use these feet with the bars # INB147.
view full answer... - What Feet Can I Use to Mount Older Thule Square Crossbars on My 2012 Toyota Sienna with Raised Rails
- I have the part you need! Since Thule discontinued their old feet that are compatible with the older square crossbars without a bottom channel, Thule doesn't make feet that are compatible. However, Inno uses the same exact square crossbar dimensions 7/8" tall x 1-1/4" wide as Thule. Also, since the Inno crossbars do not have a bottom channel, they work perfect with your older square crossbars.
The feet you need to complete your setup on your 2012 Toyota Sienna with raised rails is the
view full answer...
Inno Accessories
Fit to this rack on your 1996 Toyota Tacoma
Info for these parts were:
Video by:
Zack K
Video by:
Andrew K
Video by:
Robert G
Video by:
Zach D
Video by:
Jonathan Y
Video by:
Aidan B
Video by:
John S
Written by:
Tyler C
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Updated by:
Lisa S
Updated by:
Wilson B
Updated by:
Alex H
Test Fit:
Adam E
Test Fit:
Evangeline M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
James
3/13/2023
The side rail set is great. During a storm, I drove under dangling power line from the pole to a house that I didnt see. The line got caught on my roof rack. The foot pack held as I drove along and snapped the wire. Amazed it didnt rip the whole rack off my car.