See what our Experts say about this Inno Accessories and Parts

• What Roof Rack Fairing Fits on Thule Wingbar Evo Crossbars
  While we have a fairing solution that fits the Thule Wingbars the Thule fairings do not fit since the bar dimensions are slightly different. Instead you'd want one of these fairings as they fit most styles of crossbars. So for a 40 inch fairing we have part # INA261, 44 inch part # RRRF3, 48 inch # INA262, and 31 inch part # INA260. You want to go with a fairing that best fits the distance between the feet of the rack you have for best wind noise reduction!
  view full answer...
• Bracket Spacing Dimensions of Inno Fairing # INA260
  I attached a picture that has all of the dimensions of the Inno Fairing part # INA260 that you referenced.
  view full answer...
  
• Inno Roof Rack Fairing for a 2015 Jeep Cherokee Trailhawk
  I assume that you are also looking at Inno roof racks for your 2015 Jeep Cherokee Trailhawk. The available roof racks from Inno for your Cherokee all fit models with raised factory side rails. Because the distance between the side rails is less than 40 inches you would need to use the 31 inch model # INA260 or # INA270. The mounting clamps on the 40 and 48 inch models would be too far apart to properly fit.
  view full answer...
• Will Inno Square Crossbar Roof Rack Fit on 2003 Subaru Forester X with Rola Roof Cargo Basket
  Yes, the 46" Long Inno Square Crossbars # INB117 are compatible with both your Thule Canyon XT Roof Cargo Basket # TH859XT-8591XT and your 2003 Subaru Forester X. Since your Forester has the flush mounted rails you need the Inno Feet # INTR and the Fit Kit # INTR104 to utilize the square crossbars. I have attached a photo of this same kit along with the 31" Inno Fairing for Roof Racks # INA260 on a 2008 Subaru Forester a customer sent in that you can check out.
  view full answer...
  
• How to Pick Out Fairing for 2014 Jeep Grand Cherokee
  Measure the distance between the feet of your crossbars (the portion of the rack that holds the bar to the roof) and pick a fairing that measures the closest to that dimension as possible. The Inno and Rhino-Rack Fairings can fit most bar shapes so they are what we normally recommend for OEM roof racks like your 2014 Jeep Grand Cherokee. Below are the available sizes we offer: # INA260 for a 31 inch fairing # INA261 for a 40 inch fairing # RRRF3 for a 44 inch fairing # INA262 for a 48...
  view full answer...
• How to Pick Out Roof Rack Fairing from Yakima
  When picking out a fairing for a roof rack the best way to do it is to measure the distance between the feet of the rack and go with the fairing that matches that distance the best. We can't stop you from ordering any size you want though. We have the part # RRRF3 which measures 44 inches long, the part # INA261 which is 40 inches, # INA262 which is 48 and # INA260 which is 31 inches. The great thing about these fairings is that their hardware can fit most crossbar shapes.
  view full answer...
• Roof Rack Fairing Recommendation for 2002 Volkswagen Golf with Factory Crossbars
  The Inno and Rhino-Rack fairings are designed to fit most crossbar shapes so that's what would be your best option. Now to pick out the correct one you'll want to measure the distance between the feet of the rack and then match distance to the length of fairing. For a 31 inch fairing we have the part # INA260. For a 40 inch fairing we have the part # INA261. For a 44 inch fairing we have the part # RRRF3.
  view full answer...
• Inno Square Bar Roof Rack for 2003 Mercury Mountaineer
  In order to get the longer bars, you'd order the parts separately. You'd need the roof rack feet, part # INFR and the # INB147. There won't be a cost difference by ordering the feet and crossbars separately. You might also be interested in a fairing like # INA260 would make the rack more aerodynamic, reducing the wind noise. I've linked you to some product description videos for some of the parts I mentioned.
  view full answer...
• How to Pick Out Roof Rack Fairing to Cut Down on Wind Noise
  The best way to pick out a fairing is to measure the distance between the feet of the roof rack and go with a fairing length that best matches that distance. The Inno fairings are designed to fit most crossbar shapes so those will be your best option. For that we have the # INA260 for a 31 inch fairing, part # INA261 for a 40 inch fairing, or # INA262 for a 48 inch long fairing.
  view full answer...
• Fairing for 2017 Jeep Grand Cherokee With Factory Crossbars
  I recommend taking a look at the our wind fairings, which will fit your 2017 Jeep Grand Cherokee's OEM crossbars. These fairings come in a number of different sizes: 31 inches # INA260, 40 inches # INA261, 44 inches # RRRF3 and 48 inches # INA262. If you measure the distance between where your crossbars attach that will give you the best idea of the size you'll need.
  view full answer...
• Recommended Roof Rack and Wind Fairing for a 2016 Scion iM
  There is not a standard size wind fairing for your 2016 Scion iM. The wind fairing will need to match the distance between the mounting feet on your roof rack and since there are several different roof racks for your iM, the wind fairing will vary depending on which you have. For a roof rack, I recommend the Inno Aero Crossbar System which is composed of part # INXB100-2, part # INXS200, and part # INK467. This system has a very sleek design with aero crossbars that reduce both wind noise...
  view full answer...
• Will Inno Fairing Fit OEM Crossbars of 2018 Honda HR-V
  Yes, the Inno Fairing for Roof Racks # INA261 would fit the crossbars of your 2018 Honda HR-V. To pick out the correct size measure the distance between the feet of your rack and go with the length that best matches that distance without being longer. The fairing you mentioned is 40 inches long. The part # INA262 is 48 inches long and the # INA260 is 31 inches long.
  view full answer...
• Where to Measure for Picking Out Fairing for Roof Rack
  The best length of fairing is the one that matches the closest to the distance between the feet of the roof rack you have. So the best option I have for you is to take that measurement and then determine which works best. For a 31 inch you'd want the part # INA260 or for 40 inch # INA261.
  view full answer...
• Recommended Best Fairing for Rola Sport Crossbars on 2013 Hyundai Tucson
  For the Rola Sport Series Crossbars # 59870 on your 2013 Hyundai Tucson, the best fairing fit is the Inno Fairing for Roof Racks - 31" Long # INA260. This will give you the most wind deflection to reduce the wind noise of your roof rack system.
  view full answer...
• Will Inno Fairing Fit Factory Roof Rack on Kia
  The Inno Fairing for Roof Racks # INA260 referenced in your question is designed to fit most factory crossbars that are up to 1 inch tall, 3-1/2 inches wide and 1-1/8 inches in diameter. The 5 inch dimension you provided for your Kia Roof Rack would be quite large, so I simply recommend verifying this. It looks like the factory bars on your Kia should have an elliptical/aero shape. If this is the case, you will want to just measure their width and height to make sure they are no wider...
  view full answer...
  
• Fairing Recommendation to Fit 2015 Nissan Rogue with Factory Crossbars
  Inno and Rhino-Rack makes fairings that can fit most crossbar shapse. You would need to measure the distance between the feet of your cross bar to pick out the correct one. If you have 40 inches you would need the part # INA261, for 31 inches part # INA260, for 44 inches part # RRRF3. Go with the closest fitting fairing.
  view full answer...
• How To Determine Which Wind Fairing Fits Crossbars On 2014 Jeep Cherokee Latitude
  I'd be happy to help you find the correct wind fairing for your 2014 Jeep Cherokee Latitude. What you'll need to do is measure the distance inside to inside of your crossbar feet, as this is where the fairing gets installed and one longer than the distance between the crossbar feet will not fit. You'll need to pick the closest fairing from the options below that is not bigger than your measurement. 31" Fairing # INA260 32" Fairing # RRRF1 38" Fairing # RRRF2 40" Fairing # INA261 44"...
  view full answer...
• Fairing Recommendation for Use with Rola Cargo Basket to Help Reduce Wind Noise
  We have fairings that can attach from the crossbars of your roof rack down to the roof of your 2013 Subaru Outback Wagon but nothing that attaches directly to the Thule # TH859XT. The Inno fairings can attach to most crossbar shapes due to their universal mounting design. The best way to pick one out is to measure between the feet of the crossbars or the side rails that run front to back and go with the fairing that fits the closest to that. Like the part # INA261 is 40 inches long and...
  view full answer...
• Replacement Hardware for Yakima WindShield Fairing
  The replacement hardware for a Yakima WindShield fairing is part # Y8870044, though this does not include the straps that go through the brackets. I am not sure which size WindShield you need if you do have to get a replacement but the sizes available are 31 inches # INA260, 40 inches # INA261, 44 inches # RRRF3, and 48 inches # INA262.
  view full answer...
• Fairing Recommendation for 2018 Subaru Crosstrek
  The great thing about the Yakima roof fairings is that there are several lengths available and they mounting hardware allows it to fit all crossbar dimensions. The trick to picking out the correct size is to measure the distance between the feet of your roof rack and go with the fairing that best matches that dimension. So for a 40 inch fairing we have part # INA261, 44 inch part # RRRF3, 48 inch # INA262, and 31 inch part # INA260.
  view full answer...
• Yakima Timberline Tower Install on 2015 Jeep Cherokee with Raised Rails
  You want your raised rails to sit in the middle of your TimberLine Towers # Y33TR as you can see in the attached clip from the instructions. Since this is the location that Yakima says to install it then that's what you'll want to follow. You'll want your fairing to have a small space between it and your roof. The 48" Fairing # INA262 is actually too large for your 2015 Jeep Cherokee with the raised rails so you're going to need the 31" Fairing # INA260 instead. You would use the 48" fairing...
  view full answer...
  
• Fairing Recommendation for Fitting Rola Roof Rack on 2016 Ford Fiesta
  We have several fairings that can help. What you need to do though is measure the distance between the feet of your rack and go with the fairing that closest matches that. For a 31 inch fairing you'd want the part # INA260, for a 40 inch fairing part # INA261, for a 44 inch # RRRF3, and for a 48 you'd want the part # INA262.
  view full answer...
• Fairing Recommendation 2016 Jeep Cherokee with Ski Rack to Reduce Wind Noise
  We do offer a few fairings that will work well to reduce wind noise. You will need to measure between the feet or rails of your roof rack to pick out the correct size. Our fairings can fit basically all crossbar dimensions so here are the ones that would fit: # INA260 for 31 inch long # INA261 for 40 inch long # RRRF3 for 44 inch long # INA262 for 48 inch long The one that closest matches the distance between the roof rails or feet of your rack is the one to use.
  view full answer...
• Measurements To Install the SportRack Semi-Custom Roof Rack on a 2016 Ford Fiesta Hatchback
  I have attached the mounting dimensions of the SportRack Semi-Custom Roof Rack for Naked Roofs part # SR1010 on a 2016 Ford Fiesta Hatchback for you. The front crossbar will need to be set at the 15 mark and the rear at the 12 mark in regards to width. In regards to spread, the front crossbar will need to be positioned 10" forward of the point where the two doors meet and the rear crossbar will need to be positioned 24" back from the front crossbar on center. Please note that the square...
  view full answer...