4-Pin wiring harness makes it easy to install your Putco Blade or Red Blade tailgate light onto your vehicle while keeping OEM connections intact. Keeps your trailer connection ready for towing while using your light bar. Plug-and-play installation.

Guard against LED-related turn signal problems with these load-resistors. Simple, effective system builds resistance that corrects flash timing, thereby preventing the "hyperflash" phenomenon that occurs with LED indicators.

Keep your truck's 7-pin connector free for towing while using your Blade or Red Blade tailgate light bar with this custom wiring harness. Keeps all your OEM connections intact. Plug-and-play installation with weathertight connectors.

Guard against LED-related turn signal problems with this load-resistor kit. Simple, effective system builds resistance that corrects flash timing, thereby preventing the "hyperflash" phenomenon that occurs with LED indicators.

Guard against LED-related turn signal problems with this load-resistor kit. Simple, effective system builds resistance that corrects flash timing, thereby preventing the "hyperflash" phenomenon that occurs with LED indicators.

These harnesses plug in between your Putco LED headlight bulbs and your vehicle to prevent flickering and to prevent a delay when switching between low beams and high beams. Designed for use with Putco H10 halogen-to-LED headlight bulbs.

Get ultimate protection for your high-wattage bulbs with this heavy-duty harness. Thick-gauge wiring resists heat and helps bulbs burn brighter. Recommended for use with H8 or H11 halogen bulbs.

These harnesses plug in between your Putco LED headlight bulbs and your vehicle to prevent flickering and to prevent a delay when switching between low beams and high beams. Designed for use with Putco D1/D3 halogen-to-LED headlight bulbs.

Get ultimate protection for your high-wattage bulbs with this heavy-duty harness. Thick-gauge wiring resists heat and helps bulbs burn brighter. Recommended for use with H9 halogen bulbs.

These harnesses plug in between your Putco LED headlight bulbs and your vehicle to prevent flickering and to prevent a delay when switching between low beams and high beams. Designed for use with Putco H13 halogen-to-LED headlight bulbs.

Turn your Putco Luminix LED light bar on or off from up to 30 yards away with this universal remote control kit. Works with light bars that are 60" or longer. 2 Key fobs, radio-frequency control module, and 16-gauge wiring harness included.

Get ultimate protection for your high-wattage bulbs with this heavy-duty harness. Thick-gauge wiring resists heat and helps bulbs burn brighter. Recommended for use with 881 or 889 halogen bulbs.

This wind diffuser virtually eliminates wind noise and vibration that may occur when your Putco Luminix light bar is mounted on your roof. Designed for straight or curved light bars up to 50" long. Simple stick-on installation.

These harnesses plug in between your Putco LED headlight bulbs and your vehicle to prevent flickering and to prevent a delay when switching between low beams and high beams. Designed for use with Putco H7 halogen-to-LED headlight bulbs.

This mounting kit lets you install a Putco Venture Tec truck bed rack on your Jeep Gladiator without Trail Rail cargo management system.

These harnesses plug in between your Putco LED headlight bulbs and your vehicle to prevent flickering and to prevent a delay when switching between low beams and high beams. Designed for use with Putco 9006 and 9012 halogen-to-LED headlight bulbs.

Mount your 1-3/4" diameter truck bed side rails to your crossover-style toolbox for a clean look. Just attach these adapters to the front of your box, cut down your rails, and mount the rails to the adapters. Cutting and drilling is required.

These harnesses plug in between your Putco LED headlight bulbs and your vehicle to prevent flickering and to prevent a delay when switching between low beams and high beams. Designed for use with Putco H1 halogen-to-LED headlight bulbs.

This cover slides onto your straight or curved, 50" Luminix LED light bar to conceal and protect the LEDs and lenses. Black polypropylene construction matches the light bar for a sleek look.

Get ultimate protection for your high-wattage bulbs with this heavy-duty harness. Thick-gauge wiring resists heat and helps bulbs burn brighter. Recommended for use with 9004 or 9007 halogen bulbs.

These harnesses plug in between your Putco LED headlight bulbs and your vehicle to prevent flickering and to prevent a delay when switching between low beams and high beams. Designed for use with Putco H3 halogen-to-LED headlight bulbs.

This cover slides onto your straight or curved, 30" Luminix LED light bar to conceal and protect the LEDs and lenses. Black polypropylene construction matches the light bar for a sleek look.

This custom mounting kit lets you install your 50" curved Luminix LED light bar on the roof of your vehicle. Black powder coated steel brackets are strong, durable, and corrosion resistant. Mounting hardware and 16-gauge power wire included.

This replacement wiring harness is made with heavy-duty 12-gauge wire. The harness is compatible with the 70" long Putco Luminix LED light bar. Wiring harness includes relay and Deutsch connector.