1998 Buick LeSabre Catalytic Converters

The Inno Box 2020 Rooftop Cargo Box #IN86FR will fit as long as you have the required 24"-39" crossbar…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

To flat tow your 2010 Chevy Silverado 1500 you will need to first start with a base plate kit. For that the most popular option is the Roadmaster #3154-3. In addition to the base plates, you will also need a compatible tow bar, safety cables,…

Since you already have a factory 4-way flat on your 1996 Ford F-350 you will need the Adapter 4-Pole to 7-Pole #37185. This will plug into your factory 4-way and the rest of the wiring will have to be spliced into your factory wiring as I do not…

Both part numbers you referenced are confirmed catalytic converters for your 2003 Toyota Corolla. The difference is that the part #MF49461 is a higher grade converter. It is part of the OEM Grade line of converters from Magnaflow. OEM Grade…

Getting the inside dimensions of the Yakima SkyBox NX 18 Rooftop Cargo Box #Y45AV was no easy task, I started by contacting the manufacturer but they did not have the inside specs on any of the newer boxes like the NX line. So then we had to pull a…

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

The Tuson DirecLink Base Model Trailer Brake Controller part #335DL-100 and Tuson DirecLink Lite Trailer Brake Controller part #335DL-50 are both great brake controller options. The best option for you will be dependent on where you will be doing…

The SolidStep Manual Fold-Down Steps part #LC791574 would be correct for your Grand Design Reflection 337RLS as it works with doorways between 28" -…

The needed replacement part in smoke/tinted is, #FVK1020-19; this fits all 4000 series units. The vent is the standard 14-1/4 by 14-1/4 inch, simply need to align the lift assembly on the side and then make sure you mount the hinge square. Please…

Thank you for the photo of your Specialized Vado bike's front fork area which shows the fender and fork bridge. A wheel-mount rack such as the RockyMounts MonoRail Solo 1 Bike…

I recommend going with the largest crossbar available so that you have as much room as possible for your cargo. A nice large setup that fits your 2012 Honda Accord Sedan is the Inno Aero Crossbars - Aluminum - Black -…