Product Specs:
Trailer Lights
Tail Lights
License Plate
Stop/Turn/Tail
Red
3-3/4 Inch Diameter
Incandescent Light
Round
Surface Mount
Non-Submersible Lights
Peterson
3-3/4" Round. Incandescent trailer light serves as a stop, tail, turn, and license plate light. Durable polycarbonate housing with screw-on lens. Stud mount with included studs. 2-Wire design grounds through mounting hardware. (1) 1157 Bulb.
Video of Peterson Trailer Tail Light - 4 Function - Incandescent - Round - Red Lens - Driver Side
Average Customer Rating: 4.7 out of 5 stars (151 Customer Reviews)
3-3/4" Round. Incandescent trailer light serves as a stop, tail, turn, and license plate light. Durable polycarbonate housing with screw-on lens. Stud mount with included studs. 2-Wire design grounds through mounting hardware. (1) 1157 Bulb.I'm happy to be a customer of eTrailer. They have proven to be reliable and I am happy with the service, people, and quality of the items purchased. Great products used for our restoration of an old 20-foot boat trailer and a 7-foot utility trailer.
The wires come out of the back through a connector/nipple that protrudes and is the same length as the through bolts. It prevents mounting unless you drill an additional 1/2" hole in your steel frame.
Our old lights in the back of the 1976 Ford F100 wore out. These are almost a match. I couldn’t find any without the clear lens for license plate. Covered the lens with black tape. All good. Thanks. Great service fast delivery.
Easy to change out
Lights were exact replacement and just what I needed. Your website detail was helpful with installation.
Needed a quality light that I could use on a motorcycle bobber build; and this fit the project perfectly.
Thank You for your excellent service.
This light appears to be a direct replacement for my defective trailer light that fits into a round steel sleeve on my utility trailer. I appreciate etrailer's excellent product descriptions and helpful tips. Install should be a breeze.
Great looking taillights
The lights came in a very timely fashion. They were well packed. I replaced my 1965 camper trailer tail lights and these fit just right. The price was very competitive and since I had good results in a previous order, I went with etrailer again.
This trailer has been a real pain. Hard to find bearings and seals were nearly impossible The lighting enclosures border on stupid. I really appreciate you guys going the extra mile. You got my business. Thanks, Joe in Bend Oregon
Just received my 2 nd order, the first was fast and great condition. The lights were wrapped in plastic bags. Bright and shiny housings.This order had the tail lights wrapped in paper, they actually were terribly scratched and scuffed both of them, one did not include the 2 star washered nuts... My first thoughts were these were used. Disappointed , I called to voice my opinion. She thanked me for the call.
Too much trouble to return...hope they work when I get them installed.
Disappointed customer,
Stan
Charles P.
4/24/2015
Same thing just happened to me Stan. Ordered two replacements, left and right, and both arrived wrapped in paper with the left handed one scuffed, covered in what looks like road dust and a missing star washer nut.The other one, the right one, looked better but still not new.
Very pleased. Easy installation. The lights are bright with good reflectors and side marker lights and the price can't be beat.
Mike C.
5/1/2019
I made an excellent choice. Everything works well and has resisted the elements well. Very happy with this.
I got the round 431800 & 432000 for a 4x6 ft trailer. I had to mount them at 90 degrees from horizontal in order to light the license plate. The 432000 is designed for the license plate to be under the light. I sent an email to etrailer asking if they would let rain water in when mounted this way. They responded in about a week & said they would be fine. Well, they are not fine. Both will let rain water in when mounted this way as the drain hole is now on the side instead of bottom! I tried to caulk the holes, but caulk does not stick to the plastic. I used tape inside the housing with caulk sticking to it. Not sure how well that will work. I drilled new drain holes in the bottom. I replaced the lens screws with SS ones. I kept these only because I could not find anyone else selling them. They work, but my old ones had the clear lens welded to the housing and could be mounted anyway. These are cheap and the clear lens is snapped in with lots of gaps for water to come in. Not real happy with the results.
Broke the factory taillights on my 2003 Kawasaki Mule. They are 90 plus bucks each from Kawasaki...Ouch! I bought two of these and they were shipped all for under xx bucks! They fit perfectly, do what they are intended for and look great on my mule. Thanks E Trailer!
Simon D.
12/20/2017
Still working great, I havent managed to back into anything :D
The products were acceptable quality and the customer service was UNEQUALED, EXEMPLARY, GREAT, etc.
The trailer overhaul job went well and we hauled a capacity load almost 1500 miles in some difficult road conditions, stopping only for fuel and to sleep.
We'll use your products again.
Looks good. Exactly what I ordered. Haven’t installed it yet
Awesome!!!!
I have purchased numerous items from etrailer over the last several years and their service and quality has been outstanding. The prices are always reasonable and shipping quick. Very nice to deal with.
John
7/13/2017
The lights are working just fine. Great product.
Good quality light fixtures - exactly what I needed.
Quick shipping, good communication.
I will not hesitate to recommend etrailer.com to friends and relatives.
Stan
1/31/2018
Thanks for the note... all is well with the products I bought from you folks!
There work great! I used them to require and older sailboat trailer that has two license plate lights, one for the plate, the other to illuminate to boat to not startle people at night.
I put this on a classic Holsclaw motorcycle trailer. I felt it was the closest representation of the lights that came with the trailer and this brand was recommended to me by an enthusiast group that loves these old trailers. I was very happy to see that etrailer carried this brand. Even though I live close to the warehouse, I had these shipped and they arrived quickly. These are well made, durable and so far have worked flawlessly.
this is an inexpensive light that was originally used on pull behind trailers. It is smaller OD than usual, because people used tom put them inside steel pipe to protect them. With the advent of low profile leds, this lights usage has declined. etrailer has it in stock at a reasonable price and good quality. these lights are most often sold when someone wants to match their old style, or put back inside a steel pipe.
These lights are great trailer lights. Classic .
I actually bought these for my 1955 international harvester r110 pickup. It is very close to what came on them from the factory. I hope that they dont change anything about them unless it is to go back to a 50s or 60s quality.
The tail lights are replacements for ones that rusted. They are not installed, but the stud pattern and size are exactly as described and fit the light bracket very well. The tag bracket only needs slight modification to attach to the left tail light bracket. The parts are satisfactory for my needs. Thanks.
Great lights, didn't read description saying bulbs included. These lights are about twice as bright as my truck and almost blinding, really helps when backing up at night time. If you don't need a license plate under the light you can go with two right hand lights as they seem identical except the left hand one has a clear lens on the bottom.
Customers compare 432000 to these similar products
VS
Product Specs:
Trailer Lights
Tail Lights
Stop/Turn/Tail
Red
4 Inch Diameter
LED Light
Round
Recessed Mount
Submersible Lights
Optronics
5-1/2" Diameter round. Waterproof trailer light serves 3 functions: stop, turn, and tail. Durable polycarbonate lens and housing. Mounts on trailer with built-in flange. Accepts standard 3-prong plug.
Video of Optronics LED Trailer Tail Light - Stop, Turn, Tail - Submersible - 10 Diodes - Round - Red Lens
Average Customer Rating: 4.8 out of 5 stars (324 Customer Reviews)
5-1/2" Diameter round. Waterproof trailer light serves 3 functions: stop, turn, and tail. Durable polycarbonate lens and housing. Mounts on trailer with built-in flange. Accepts standard 3-prong plug.The trailer tail light fit perfectly on our 2011 Montana camper.
I would purchase the lights again!!
I always find the right parts for my boat trailer. The service is great I like to keep a spare set of lights for my2008 Ranger trail trailer
All the trailer lights were OEM and fit perfectly
Used these to replace old lights on my horse trailer. Installation was easy and they are very bright. I had issues with a connector on my first order, but the second was just fine. I also had issues with one being dim, but found out it was my trailer plug. Once it was replaced, it was great! Would use these on another trailer if needed.
Excellent replacement tail light
Lights are great and fit perfect in my ‘09 Z520 Ranger boat trailer. Only reason for the 4star rating is because some of LEDs went out in the first set I bought. Four of the ten diodes would be lit but very dim. Thought it might be a ground wire or something on my trailer. It was not. This happened about three years after I put them in. I guess for how easy/inexpensive they are, it’s a good value still.
Part fit perfectly and works great!!
Easy to order and received part sooner than expected!
Recommend etrailer to anyone.
Thanks!!
Lamar
6/15/2023
Still working great. Would recommend to anyone!!
Great service, great product
I put these LED lights on my 1967 Scotty. They have a nice clean look, and show up so much better than the originals. The wiring process, with the plug in connections, was easy!
Excellent quality of there product.
Arrived promptly and was packaged in a protective box with padding to protect it during shipment. This was the first time I ordered from the company. I found the stop lights to be a quality product and would order from etrailer again!
Joseph
1/30/2023
I used these lights in conjunction with a wig-wag flasher unit to build a Railroad Crossing replica for my model railroad train room. Works and looks great in the sun-blocker shades I built around each.
Worked as should for 2009 Ranger bass boat trailer !
Great lights, very bright and visible day and night, much much better than the factory bulb light. I have recommended them to our friends who have RV's
Thanks etrailer
They look great and are plenty bright. Don't forget to get those wiring pigtails though. These do not have any way to connect without them. No external wires, just a 3-prong connection on the housing.
Bryan
11/3/2021
These have been a good replacement for the old incandescent lights. Still working great.
On time ,fits my boat trailer and works as it should. Thanks for the quick service
Perfect fit, wiring as described! Perfect upgrade for our 60s Sears Tent Trailer
100 times better than the original lights I had with traditional bulbs. With the LEDs you can see them even better during the day. Which is nice to know that people can see me at all hours of the day.
Thanks... the light is perfect and at a great price. The other place wanted $26.00 for the same light and you charged much less. I highly recommend etrailer.com for parts.
These are exact replacements for my 2009 RangerTrail trailer. Fit perfectly.
nice lights
Fit perfectly on my trailer and works g reat!
Just what I needed for a perfect replacement on my boat trailer
Very imprest with your service and follow-up to make certain the product arrived. Customer service is more important than the product in my opinion. (Recently bought a fully equipped 3500 ram dually Laramie longhorn truck-paid cash-and went to 3 dealership B4 I found a good service dept. Next purchase will be with this dealership regardless of price. Could probably get some of my needs cheeper thru Amazon but because of your service I will be dealing with you.
These LED tail lights are exactly what I have been looking for to renovate a trailer with recessed lights. I was excited to find them available from the etrailer company. Placing the order was easy, the company notified me when the order shipped, and the lights were delivered in a VERY TIMELY fashion!! This company has earned a 5 star rating, as well!
John G.
4/30/2018
Lights continue to function well and they still look great!! Fantastic quality!
These lights worked out great. good price too!
EZ install.
David
7/10/2020
Still working great!!
Customers compare STL42RB to these similar products
Clyde S.
2/20/2018
Great follow up, Laura.The lights were just like the original ones on my trailer. Installed easily and worked the first try. I wanted to keep my 1965 Bethany camper as original as possible and these lights did the job.