Select Your Vehicle
view cartView Cart

Trailer Lights > Tail Lights > Non-Submersible Lights > Incandescent Light > 3-3/4 Inch Diameter > Round > Red > Surface Mount > Peterson

Peterson Round Trailer Tail Light with License Plate Light, 2 Stud Mounting, Left Hand

Peterson Trailer Lights

ratingratingratingratingrating (11 reviews)

Code:   432000


Shipping Special

Shipping Weight: 1 pounds


Peterson Trailer Lights - 432000

Stud Mount Four Function Light performs as a stop, turn, tail light and license illuminator. Features a wrap-over lens retained by two screws onto a black plastic housing making the light dust resistant. Mounting hardware and 1157 bulb included.


  • Driver side stop, turn, tail light and license illuminator
  • Light grounds through mounting studs
  • Brown wire is running lights
  • Red wire is turn signal and stop

428 Dimensions

428W Round, Left Hand, Stud Mount Trailer Tail Light with License Plate Light by Peterson Manufacturing

Video of Peterson Round Trailer Tail Light with License Plate Light, 2 Stud Mounting, Left Hand

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video Demo Peterson Trailer Lights 432000
Peterson Trailer Lights 432000 Review

Video Transcript for Peterson Trailer Lights 432000 Review

Today we are going to review part no. 432000. This is the Peterson Round Trailer Tail Light with the License Plate Light. And this is a two-stud mounting light, and it is for the left-hand side. That is why they actually have the license plate light down here, designed to go on the left-hand side of your trailer. Now, this light will ground through the mounting studs; these two mounting studs on the back.

Basically you just unscrew the bolts. And then when you mount this onto a trailer, you just want to make sure that this does attach to a nice, clean, unpainted surface, because you do want to get a good ground through the studs itself. Now this lens right here, you can see the two screws. They can be removed. Also, this clear lens down here can be popped out.

And it does include a 1157 dual-filament bulb. Its included. And, it can replaced if it does burn out. Now, it has two wires on the back here. You can see, this ones a brown wire which is designed for the running lights.

This one is a red wire which is designed for the turn signal and the stoplights. Do want to give you a few measurements on this. Give you an idea of the overall width. Its going to be right at 3 and 3/4 inches. The depth from the lens to the back here is going to be 2 and 5/8 inches.

The distance between the center of both mounting studs is 2 inches. Now what Im going to do is, I have a 12-volt power source here. Were going to connect it up just to give you an idea of how bright the light is, and what the features are. Im first going to take the 12-volt power and then, again, we are going to take the brown wire and hook the power to that. Then the red wire, were going to take the turn signal and brake, hook it up. Then, again, for the ground, Im going to take the ground and just ground it to this mounting stud, as you can see right here, and were all set up to go. Now, well go ahead and turn off the overhead lights. Now, Im going to turn on the 12-volt power source. Now, youll see this is your running lights, on your trailer. The power connected. And when you hit your brakes, youll be able to see how the dual filament bulb will get brighter. Also, when you do your turn signals, thats what your turn signals will look like. I do want to turn it up so you can actually see this clear lens will give the light. The light will shine onto your license plate; eliminate your license plate light. Okay, now, well go ahead and turn the overhead lights back on. Im going to disconnect it. And that should do it for the review on part no. 432000. This is the Peterson Round Trailer Tail Light with the License Plate Light. .

Customer Reviews

Peterson Round Trailer Tail Light with License Plate Light, 2 Stud Mounting, Left Hand - 432000

Average Customer Rating:  ratingratingratingratingrating4.5 out of 5 stars   (11 Customer Reviews)

- 432000

ratingratingratingratingrating by: Keith J04/10/2014

Is this review helpful?

I'm restoring an older snowmobile trailer and these lights worked just like I wanted. They were easy to install, fit perfectly and are exactly as advertised. They were shipped promptly with great notification from etrailer of my order status. Great job guys!124564

- 432000

ratingratingratingratingrating by: Stan R10/24/2013

Is this review helpful?

Just received my 2 nd order, the first was fast and great condition. The lights were wrapped in plastic bags. Bright and shiny housings.This order had the tail lights wrapped in paper, they actually were terribly scratched and scuffed both of them, one did not include the 2 star washered nuts... My first thoughts were these were used. Disappointed , I called to voice my opinion. She thanked me for the call. Too much trouble to return...hope they work when I get them installed. Disappointed customer, Stan105019

- 432000

ratingratingratingratingrating by: Marcelino Ortiz03/27/2014

Is this review helpful?

Great product fast shipping thank you so much 122561

- 432000

ratingratingratingratingrating by: Richard G10/16/2013

Is this review helpful?

Lights were delivered fast. Both the quality and the price were very good.104033

- 432000

ratingratingratingratingrating by: Jim I.10/03/2013

Is this review helpful?

Exact fit for my older trailer, about the only place I could order these lights. Well packaged, great price, fast shipping.102448

- 432000

ratingratingratingratingrating by: steve Tantaros10/03/2013

Is this review helpful?

MADE in USA 102352

- 432000

ratingratingratingratingrating by: Rick08/26/2013

Is this review helpful?

I have a 1967 trailer that came with this style tail light. I wanted to stay with the original look and these fit the bill perfectly...thanks.96945

- 432000

ratingratingratingratingrating by: teddyboy08/22/2011

Is this review helpful?

Light came to me without the 1/4" nuts as the other side did.22495

- 432000

ratingratingratingratingrating by: Jim B.05/23/2011

Is this review helpful?

Standard trailer lights that were replacing exact same lights that were about 20 years old. Best part about the order was the quick shipping time by e-trailer. Thanks!15162

- 432000

ratingratingratingratingrating by: john s.05/17/2011

Is this review helpful?

very quick and got exactly what i order ed....14593

- 432000

ratingratingratingratingrating by: Cliff N.05/16/2011

Is this review helpful?

Having an older trailer, it was important to find a newer match for the trailer tail lights. These were just the thing I was looing for and at the right price with shipping.14352

Ask the Experts about this Peterson Trailer Lights
Expert Answers about Peterson Round Trailer Tail Light with License Plate Light, 2 Stud Mounting, Left Hand - 432000                                            Do you have a question about this Trailer Lights?

Info for this part was:

Expert Research:
Robert G

Expert Research:
Patrick B

Expert Research:
Reno H

Updated by:
Adele M

Photos by:
Sam P

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Subscribe to email newsletter


privacy - we don't send unsolicited email

Only 5 Hours 9 Minutes Remaining reviews

All images, layout and content copyright