Performance Tuners Specs:
Videos
for Performance Chip
Help Articles
for Performance Chip
Expert Answers
for Performance Chip
For the Edge CS2 Evolution Diesel Tuner you will need to enter the programming menu. You will turn on your vehicle without starting it. Then use the Menu button to open the main menu and scroll down with the arrow to the Programming on the screen.…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...Okay, we can get you all of that, and let's start with the equalizer upgrade, suspension kit, and shocks for your toy hauler with triple 8,000 lb axles. The best equalizer upgrade for your 35 inch axle spacing, along with the…
view full answer...The Edge Diesel Evolution CTS3 Performance Tuner #EP96TR referenced in your question is confirmed to fit your 2002 Ford F-250 7.3L Diesel. I can't be certain what your local shop is referring to with regards to an existing chip…
view full answer...When installed on your 2000 Ford F-250 7.3L Diesel Engine, the Edge Evolution CTS3 Performance Tuner #EP96TR that you referenced will give you up to 120 horse power and 315 ft lbs of torque. This tuner will plug right into the…
view full answer...With the Edge Diesel Evolution CTS3 Performance Tuner #EP96TR installed on your truck when towing you'd most likely see around 2 more miles per gallon but it's really pretty hard to say. You also can use it on…
view full answer...The pin box on your 2023 Heartland BigHorn 3970RL is a Lippert 1621. The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY38FR will fit the bolt pattern but I'm not 100% sure it is the correct capacity. You need to…
view full answer...You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you…
view full answer...The main difference between the #RAS3611 and #RAS3611-HD is the capacity. The regular system has a 2,000 lb weight capacity while the HD system is 3,000 lbs. I would choose the HD system for the additional support. The lowest tension setting on the…
view full answer...The Edge Insight CS2 #EP84030 is a fairly easy install. The most difficult part is routing the wire from the OBD-II port under your vehicle up to your windshield. After that you will just need to attach the window mount to the window and then…
view full answer...Yes, the Sidewinder wedge part #RP44FR is the correct wedge to use with the Reese M5 hitches like the part #RP75VR.
view full answer...The transmission tune, or trans tune, on the Edge Gas Evolution CTS3 Performance Tuner #EP39YR changes the shifting point as part of the engine tunes. Basically it will change the shift strategy, schedule, and timing depending on the selected…
view full answer...Filter Products (2)