Bumper Specs:
Features:
Get maximum off-road functionality and front-end protection with this bumper that has a built-in, tubular grille guard. Tapered ends provide clearance for approach and departure angles. Included D-rings let you perform recovery operations.
Installation Notes:
No drilling required for installation
More Information >Bumper Specs:
Features:
Replace your vehicle's rear bumper with this sturdy steel recovery bumper. The integrated, swing-away spare tire carrier holds up to a 35" tire. Includes welded shackle mounts with D-rings and built-in receiver for hitch-mounted accessories.
Installation Notes:
Drilling may be required for installation
More Information >Bumper Specs:
Features:
...Welded, 1-piece construction for added strength Simple installation - drilling may be required 8449 Rampage Front or Rear Double Tube Bumper - Stainless Steel...
Installation Notes:
Drilling may be required for installation
More Information >Bumper Specs:
Features:
...The hitch receiver on this bumper is designed for use with accessories only. Do not use for towing. 8448 Rampage Rear Double Tube Bumper with Trailer Hitch Receiver - Stainless Steel...
Installation Notes:
Drilling may be required for installation
More Information >Bumper Specs:
Features:
...Dual-stage black powder coat sits on top of zinc undercoat for maximum corrosion protection Simple, bolt-on installation 1-Year limited warranty 97801 Rampage Front Rock Rage Bumper - Black Steel...
Installation Notes:
No drilling required for installation
More Information >Bumper Specs:
Features:
Replace your factory front or rear bumper with this stylish, tubular bumper. Double-tube design provides protection for your vehicle. Dual powder coat finish over zinc coating offers maximum corrosion resistance.
Installation Notes:
Drilling may be required for installation
More Information >Bumper Specs:
Features:
...and rustproof Polished finish adds a touch of class Welded, 1-piece construction for added strength Simple installation - drilling may be required 8420 Rampage Front Double Tube Bumper with Grille Guard ...
Installation Notes:
Drilling may be required for installation
More Information >Bumper Specs:
Features:
...span>Rampage Front Recovery Bumper with Grille Guard and Light Cans - Textured Black Steel...
Installation Notes:
No drilling required for installation
More Information >Bumper Specs:
Features:
...strength Simple installation - drilling may be required Note: The hitch receiver on this bumper is designed for use with accessories only. Do not use for towing. 7648 Rampage Rear Double Tube Bumper...
Installation Notes:
Drilling may be required for installation
More Information >Bumper Specs:
Features:
...span>Rampage Front Double Tube Bumper with Grille Guard - Black Steel...
Installation Notes:
Drilling may be required for installation
More Information >Bumper Specs:
Features:
...for towing. 78615 Rampage Rear Recovery Bumper with Swing Out Spare Tire Carrier, Light Cans, and Accessory Receiver - Textured Black Steel...
Installation Notes:
Drilling may be required for installation
More Information >Videos
for Bumper
Help Articles
for Bumper
Expert Answers
for Bumper
Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…
view full answer...The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.
view full answer...The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.
view full answer...I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for…
view full answer...To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…
view full answer...You do not want to use a holding tank heater like ThermaHeat #277-000164 on a battery but we do offer battery heaters specifically intended to protect one from extreme cold. You can see all such items on the page I linked for you.…
view full answer...We do have a compatible grease seal for your 168255TC oil seal, however, we do not carry rubber coated seals in this size. The 168255TC oil seal was designed to work with oil bath hubs on a 3,500 lb axle. For the most part, axle manufacturers have…
view full answer...From the looks of the photo you sent it does not look like you have an OEM suspension system on your boat trailer. I recommend securing the suspension rail to the trailer frame in a more secure manner like drilling and using bolts so that it does…
view full answer...The UFP H-1377 correlates to a Dexter #84 spindle, which is for a 3,500 pound axle. This will utilize an inner bearing #L68149 and an outer bearing #L44649. As this is being used on a boat trailer, I highly suggest going with the etrailer.com…
view full answer...A #93 incandescent bulb has a single contact bayonet base, and there are a couple of options for LED bulbs that will replace these. You can choose a bulb that gives off either a warm or cool light; I have added a photo showing the difference…
view full answer...Having the extra amperage of the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K has no down side. You'd at worst just have more power available than you'd need.
view full answer...You'd need a new panel like the Progressive Dynamics Mighty Mini part #PD4045KA which is the most similar to your Parallax 7345 except is Lithium battery compatible. There isn't a center section replacement available…
view full answer...Filter Products (22)
Contact and Help