To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
With brighter, whiter light output and longer light beams than your traditional, factory bulbs, these replacement halogens maintain the same overall look of your Ford Expedition while providing intense, pure-white light for dramatically improved visibility.
Features:
Specs:
Cool-colored light, especially that with a high color temperature, promotes driver alertness, as opposed to warm-colored light, which promotes relaxation. Color temperature is based on chromaticity, which refers to the quality of a color rather than its luminance. In short, Putco's halogen bulbs incorporate bright light with high-quality color so that not only can you see the world around you, but you can be truly aware of it.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today on our 2007 Dodge Durango, we're going to be installing the Putco Pure Performance H13 halogen headlight bulbs in a double white, part number P230013DW. Now, before we begin our installation of the new bulbs, we're going to show you what the old bulbs look like so we can do a comparison later. As you could see here, this vehicle actually has one burned out headlight bulb and the other one is not very bright. To begin our installation, we're going to first need to raise the hood of the vehicle. With the hood of the vehicle raised, we're going to go ahead and begin over here on the driver side. We'll need to remove this bolt here as well as right here. To do that, we'll simply use a 10 millimeter socket.
Next we've gone ahead and turned the wheels here on the vehicle to give us a little more access because we're going to need to open up this panel here and remove one more nut that's behind the headlight assembly. Go ahead and just take a flat blade screwdriver and open up the panel. Then right up in here, there is one nut that you'll need to remove. Next, we'll go ahead and pull our headlight assembly out. We'll need to unplug the light connections. We'll need to remove or slide this locking tab back so that we can undo it.
Squeezing in on the tab will release it. To remove the bulb, we'll simply twist and slide the bulb out. Now that we have the factory headlight out, we're ready to install the new Putco Headlight. Go ahead and take our light assembly. Go ahead and take our light bulb. Line it up in the back side of the headlight assembly.
Twist it to lock it in place. You'll want to the locking tab on the top side so that lines up with the wiring. Then put our connector back on, making sure you hear it clicking to position. Put the red locking tab back in and you're ready to reinstall the headlight assembly. With all the hardware tighten down, we can go ahead and close our access panel back up. Now that we have the driver's side installed, we still have the original headlight installed on the passenger side.
Now, let's go ahead and give you a comparison. We'll turn the lights back on so we can see the difference between the new light and the old light. You could see here with our headlights turned back on, you can see how much whiter the light installed on the left hand side is or on the driver side compared to the light that was already in this vehicle. The new one is much whiter while the other one has more of a yellowish brown tint to it. Now, we'll go ahead and repeat the same process over on the passenger side. Now that we've got the second headlight installed, we'll go ahead and turn our headlights on again and show you what it looks like with both new Putco headlights in the vehicle. You notice how much whiter the lights are compared to before. Now, we'll go ahead and turn the high beams on to show you that as well. That will do it for the installation of the Putco Pure High Performance H13 halogen headlight bulbs, part number P230013DW on our 2007 Dodge Durango. .
Average Customer Rating: 4.4 out of 5 stars (141 Customer Reviews)
With brighter, whiter light output and longer light beams than your traditional, factory bulbs, these replacement halogens maintain the same overall look of your vehicle while providing intense, pure-white light for dramatically improved visibility.Oh wow! I am so happy with these LED replacements for my old rear incandescent trailer lights! The old incandescents where so dim and slow to light. These new #1157 LED replacement bulbs work perfect and are twice as bright and instantly come on and off. They give my trailer a new modern look. Super happy!
Package arrived right on time as UPS/USPS tracking info stated (after they fixed the error originally posted. It was pretty humorous, it said 10/05/13 was the delivery date. I thought maybe they were delivery it by Pony Express ; ) I guess someone inverted the date 05/10/13.
Considering I was told it was backordered when the order was placed, I was impressed that I had it within a couple weeks. I really like the printed info you have on the flap inside the box, excellent idea! Yours is the first I've seen of this. Product is great and works just fine. Best Price around and great Communication makes for a Great Experience!
I am very disappointed in this product altogether. The bulbs were rattling around inside the package and not secured in the case.
The light output is less than satisfactory, I have to have fog lamps on and still my fog lights are outperforming these bulbs. On the plus side they have a nice blue tint.
I'm going to try to get reimbursed
Simple modification to the truck and they make the interior look so good. I am very happy with them andl recommend these lights.
Great replacement bulbs. The bulbs are blue but give you a much whiter light over factory bulbs. Easy to install and are bright. In one of the photos, you can see the temperature difference.
Putco Jet Yellow H10 Halogen 42 W Fog Light Bulbs
The Putco Fog Lights are awesome, they will be super when the snow and black ice come back around, although I'm not is a hurry for it now, they work Great in the fog too, no white light glare blinding you . Installation was a breeze, and only took 20 minutes.
I took this pic with my phone as you can see but if you look close you can see the woods past my drive way let me tell you it says pureit meens pure the light is clear bright and makes everything clear they should start making cars with these lights as factory lights and the purple tint is way cool looking I love theses lights almost more then my WIFE!!!!!!!
Great product, fast shipping, amazing customer service. Patrick even confirmed that the packaged arrived. Product was correct and works great. Brighter compared to my old stock bulbs. Was very happy with these bulbs, will order from etrailer again. Recommend to everyone.
2004 Ford Ranger FX4 Supercab
Its Okay. Was excited to get this in because the stock bulb didn't light the cab up at all. I don't like how it hooks up. There is a very cheap adapter that I had to play with and get in just the right spot in the factory socket for it to work. The adapter plugs into the factory socket off the adapter a little wire plugs into the LED light. The LED light has tape on the back side and you have to find a spot inside the dome light to mount it. I wouldn't buy it again. BUT it dose light up my cab very well and that is what I was looking for.
First, I have to mention how impressed I am with e-trailer. My order was shipped the day I placed it. Outstanding! I received several updates concerning the status of my order. When the order arrived it was packaged properly. The Putco Jet Yellow halogen lights I ordered replaced white halogen fog lights on my '09 Ford Fusion. Not sure when/why car companies started putting white lights in for fog lamps but white light is reflected back in heavy snow, fog or rain. Yellow light actually penetrates the inclimate weather allowing one to see while driving. Thanks, etrailer for offering a great product. Yellow halogen bulbs are hard to find (at least for me).
Very pleased with how track bar eliminated "tail sway" caused by passing trucks and crosswinds. Took me some time to install but very pleased with outcome.
I purchased windshield wiper blades and also low beam replacement bulbs for my 2005 VW Jetta. I love the customer service and how they answer all your questions. And ordering products are so simple and easy. I had to replace my old wipers, they were worn. My new blades work very well, and are so very quiet. No more streaks, noise, and trying to see where I am driving. I want to give a shout out to Mark. He was very patient and very helpful. I purchased the Michelin Hybrid Style 24'' and the 19'' blades. And Putco pure high performance H7 headlight bulbs. I must say I am amazed at how much brighter my car headlights are. etrailer is the best and I am a lifelong customer now. Thank you so very much.
Great product, great price,and super fast delivery ! ! !
I am in the process of adding a trailer hitch so I can stcik on & plug in this great looking LED light bar. Installation looks simple ! Can't wait to see what it looks like in action. I love the fact that it has the 'white' lights in the middle, with the red lights at each end. A very unique look!
2004 Ford Ranger FX4 Supercab
Disappointed... Purchased these for my license plate lights. The LED bulb is 3/4 to 1 inch long and that is to long. The factory bulb is way shorter! The bulb would bottom out in the license plate lens and I couldn't get the socket to lock in. So that sucks. The LED bulbs give off a really sick bright color blue and would look great on my truck if they would fit. I would have returned them but found a spot for them on my 2007 for Taurus... At least my work car looks good :/
I originally Installed these around 5/31/13 ( see comments on these dates) and follow up on 6/19/14. One finally burned out and I bought another set to replace the burned out one and will have a spare on hand. These are perfect for our area, with all the rain and fog. One thing nice about these is that when the freezing fog starts these lights make the ice stand out, like there is a puddle of water on the road. Then you know its time to slow down. Hope they never quit making these lights.
Replaced OEM interior light with LED lights. Much brighter. And the best part was it came as a Kit for my vehicle, meaning all of the dome and map light bulbs were in one package. Didnt have to order nurmous different type bulbs.
Pretty Cool . . . but . . . the high beam quit on one bulb in 15 months . . . took a while to adjust to new lights - road signs looked as if they were glowing.
The product is excellent and an exact fit. Installation was a breeze for anyone with basic mechanical skills and tools. The increased lighting they provide is phenomenal. Thank You.
It looks a little cooler than the stock reverse lights, but it is either the same brightness or maybe even not as bright. The reverse lights on my 2012 f-150 were pretty bad and thought the LEDs would be brighter. There was no clear information on how bright these were but for sure were no help.
I went and ordered some lights that mounted under the bumper.
Overall a great product and extremely easy to install myself even with no mechanical experience. Once I figured out how to gain access to the front map lights on my '12 ram the rest was a breeze. Installation instructions were a bit vague though and didn't apply to my vehicle but I got the jest of it fine.. like the brightness these light put out as it does make reading a map in a dark vehicle much much easier then the stock light bulbs.. definitely recommend and definitely recommend etrailer as supplier.. extremely fast delivery even with the standard shipping as I'm cheap
Very nice light giving extra vision at night. The product details say " Intended for off-road use only - do not meet Department of Transportation specifications", but packaging says this is DOT compliant.
Lights work good. They are bright and look good. I have them on a 3500 dodge.
I had one go out but really isn't fault of light when it does. The connection on them plugs into the factory light socket. Not the best forever connection. Could fix buy cutting off and putting something good on. But it is nice that they just plug in also.
Absolutely amazing difference in the lighting within the cab. I have a crew max '12 tundra and the interior is huge. With the led lights it illuminates the entire cab very well.
I purchased this for my mega cab and found that there were only 4 LED boards in the set. The front two had resistors in them and we had no problems with those lights working the way they are supposed to. The middle two would not light when the map light buttons were pushed. The middle two did not include resistors on them. So I contacted tech support and they were a tremendous help. I opted to go a slightly different way from their recommendations. I was very disappointed not to have the fifth light that would go to the back inside part of the cab so that it would be a complete LED package inside of the truck. This is what I thought I was paying for when I purchased this product based on the description listed on the product.
Product is a great piece to my truck, along with the head lights I bought with it. They look and work great. The only thing that needs to improve though is delivery time of receiving them. I waited a month to get them, was worth it, but still shouldn't have to wait that long from when I ordered them. Don't have any pics though to share with this review, sorry.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.