bing tracking image
  1. Accessories and Parts
  2. Putco
  3. Vehicle Lights
  4. Wiring Harness
  5. Halogen Light
  6. H13
  7. 9008
Putco Wiring Harness for H13 and 9008 Halogen Bulbs

Putco Wiring Harness for H13 and 9008 Halogen Bulbs

Item # P239008HD
lowest price pledge
Retail:$26.15
Our Price: $10.17
You Save: 61%
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.05 lbs
Quantity: 
In Stock
Putco H13,9008 Accessories and Parts - P239008HD
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Videos

Need help with installation?
Locate installers near me
Get ultimate protection for your high-wattage bulbs with this heavy-duty harness. Thick-gauge wiring resists heat and helps bulbs burn brighter. Recommended for use with H13 or 9008 halogen bulbs. 1-833-496-1390 to order Putco accessories and parts part number P239008HD or order online at etrailer.com. Free expert support on all Putco products. Guaranteed Lowest Price and Fastest Shipping for Putco Wiring Harness for H13 and 9008 Halogen Bulbs. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (14)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

Putco Accessories and Parts - P239008HD

  • Vehicle Lights
  • Wiring Harness
  • Halogen Light
  • Putco
  • H13
  • 9008

Get ultimate protection for your high-wattage bulbs with this heavy-duty harness. Thick-gauge wiring resists heat and helps bulbs burn brighter. Recommended for use with H13 or 9008 halogen bulbs.


Features:

  • Thick-gauge wiring helps bulbs burn brighter
    • Designed for use with H13 or 9008 bulbs
  • Heatproof design offers protection from temperatures as high as 480 degrees Fahrenheit
  • Pig-tail harness replaces factory plug by splicing into vehicle's wiring
  • Connected plug is made of hard, insulated plastic
  • 1-Year warranty


Although it is not required that you purchase a wiring harness to use your new Putco halogen lights, it is recommended. The wire used to make this harness has a thicker gauge than the wire in your vehicle's factory harness; the thicker wire is preferred for higher-wattage bulbs. The result is bulbs that burn more brightly with a greater measure of safety - no melted wires and no heat-related damage.



239008HD Putco Standard Wiring Harness - H13, 9008




California residents: click here


Video of Putco Wiring Harness for H13 and 9008 Halogen Bulbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Putco Halogen Bulb Wiring Harness Review

Today we're going to be installing one of the Putco light sockets, part number P239008HD. In addition to the light socket we'll also be using some heat shrink butt connectors, part number DW05743-5. This socket fits 9008 bulbs as well as H13 bulbs. Now there are a lot of different bulb styles used on vehicles, but the installation process will be much the same for any of those sockets. If the wire gauge you are using is a little bit heavier than ours, you'll need a heavier gauge butt connector, so check out part number DW05744-5. So this is the part that we are going to be replacing down here. Sometimes this plastic gets brittle over the years and it might break when you're just getting it out. We've got a bad pin connection inside so what we're going to do is we're going to remove it and then splice in right here. The first thing we need to do is pull the lamp out of our headlamp assembly and disconnect it.

So we're going to twist the whole fixture and pull out the assembly. This grey portion is the part that we're replacing, the black is the actual base of the bulb, so we're going to remove that. We're going to come in and leave as much slack as we possibly can to splice into. Here we go. Alright, once we've got some access to our wires, we need to strip back about a quarter of an inch. I'm going to take these fresh stripped ends, twist the copper strands together, it will help them go into the butt connector easier.

Also if you're comfortable using a soldering iron, you can get a better connection if you use a soldering iron and heat shrink rather than butt connectors, but butt connectors will still work. Put the butt connector into place, put your crimp in, and lock it down. Okay, so we've got our butt connectors installed now on the factory wire leads. So it's time to grab our old socket as well as our new socket so we can color match everything and get it wired up correctly. So here's our new socket, here's our old socket and we've laid them out, as you can see, in the same orientation. So now we're going to do is match up the color codes. The left wire on our new socket used to go to the brown wire with the blue tracer.

The middle wire will go to the black wire with the green tracer and the far right wire will go with the yellow wire with the black tracer. Again, just remember that you match up the wires by position according to the old connector that we cut off earlier. Our butt connectors here are heat shrinkable, so if we apply heat to the ends, the material will cinch up around the wire. We've got to be careful not to get it too hot and damage the wiring and we're kind of in a tight space here, so we're going to be very careful not to over work it with too much heat. You can use a heat gun, if you got one, but most everybody has a lighter of some sorts in their house that you can use to accomplish this job as well. Just make sure you dont apply too much heat and that you keep the lighter moving so you don't burn anything. Now we're just going to come back over everything with a little bit of electrical tape and wrap it back up.

We'll go ahead and re-install our bulb for the last time, put it back in place. And that's it for the installation of part number P239008HD from Putco and be sure to check out the links for replacement sockets for other bulb types. .


Customer Reviews

Putco Wiring Harness for H13 and 9008 Halogen Bulbs - P239008HD

Average Customer Rating:  4.9 out of 5 stars   (14 Customer Reviews)

Get ultimate protection for your high-wattage bulbs with this heavy-duty harness. Thick-gauge wiring resists heat and helps bulbs burn brighter. Recommended for use with H13 or 9008 halogen bulbs.

by:

This connector is a substitute for GM #88988364 (Delco #PT2108). It does lack the red plastic "plunger" -- the function of which eludes me -- that the GM part contains. I was very happy to find this part, as the GM list price is exorbitant.


Comments
One year later the connector is still doing fine. I finally learned what the red plunger on the OEM GM part does. Its a release safety that must be pulled back to separate the male and female components. I just reused the old red plunger on the new part I ordered.
Ryan - 07/06/2020


by:

Had to replace a burnt wiring harness connectorf for my 2010 Camaro. It arrived fast and was super easy to install. Thanks




by:

The wiring that I purchased to repair headlight was made of quality material and it was exactly what I needed to make repair. The part was under $10.00 which could have been very costly going through a mechanic shop or dealer. Thanks for the quick delivery and I must say that the product was well packaged upon delivery. Keep up the Excellent work.


Customer :)




by:

So far so good. Everything is working as expected. Arrived in a reasonable amount of time. The product was Taiwanese so only time will tell how durable it is.




by:

The part is excellent it was a match way to go awesome job guys. Now I have a reliable company that I can turn to for parts for my car thanks so much




by:

Quick Ship -- Item as Described -- Easy Installation -- Thanks




by:

got the item in a timely manner with out any problems..




by:

Exactly what I was hoping and works like a dream! Shipped fast, appreciated the emailed updates and will shop here again for sure




by:

Good price and prompt delivery




by:

Easy to install and works great




by:

Excellent product, and it was delivered very promptly.




by:

I wired it in and worked as expected. No problems to report.




by:

Product was as ordered and arrived here ahead of schedule




by:

Just what I needed.



14
14

See what our Experts say about this Putco Accessories and Parts




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Patrick B
Test Fit:
Patrick B
Employee Dustin K
Video Edited:
Dustin K
Employee Amy B
Updated by:
Amy B
Employee Jason W
Updated by:
Jason W
Employee Hannah L
Updated by:
Hannah L
Employee Noah M
Updated by:
Noah M
Employee Chris R
Video by:
Chris R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.