customer service | view cart  View Cart

Exterior Vehicle Lighting

Select Year

Exterior Vehicle Lighting

Available Years for Exterior Vehicle Lighting


Vehicle Lighting

Give your truck a finished look with a custom-fit third brake light. These LED lights with free form reflectors give you bright, clear light where you need it with the look you love, illuminating your bed much better than an OEM cargo light. Each light is equipped with a polycarbonate lens for durability and super bright LEDs which last longer and use less power than normal incandescent lights. These third brake lights use the existing factory plug for an easy installation with no cutting or splicing.

We offer many custom fit styles for popular truck manufacturers like Ford, Chevrolet, Dodge, and GM. Find the right fit for your vehicle by entering the year, make, and model to the left.




What our customers are saying:

Arrived today, fantastic!

Harry

Savannah, GA







Lights Videos

Custer Lights HF20RL Review

Today were reviewing part number HF20RL from Custer. This is a rotating amber warning light. It is SAE class 3 light. The lights themselves are LEDs. This is cordless and it mounts by magnetic power and its a very strong magnetic pull. So let me show you.


Putco Lights P920556 Review

Today were reviewing part number P920556 from Putco. This is a set of their Pure LED roof lamps for your Dodge Ram model years 2003 through 2009. These five lamps replace those that are currently on your roof. So you simply remove the current ones and then attach these to the connector on your roof. They have a smoke-tinted lens and a bright amber LED set of lights in here. You have three LEDs in there and LEDs, as you know, will last thousands of hours as opposed to incandescent bulbs which last only a few hundred hours and they also warm up much more quickly than incandescent bulbs.


Putco Lights P280150 Review

Today were reviewing part number P280150 from Putco. This is a pair of LED Headlamp DayLiners that are made of chromed aluminum and are going to add a little bling to your Chrysler 300 or 300c model years 2005 to 2010. As you know, LED lights provide thousands of hours of bright white light, and theyre going to resist corrosion because of that chromed aluminum construction and they apply like an applique. On the back is pre-applied 3M automotive tape. The same kind thats used in the factories. So they mount right underneath of your head lamps and they can wire into your low beam headlamps or to your daytime running lights.


Putco Pure Premium LED Festoon Dome Light Bulb Review

Today were going to review the Putco Pure Premium LED Festoon Dome Light Bulb, part number p230150. The Putco Festoon light has a life of 50,000 hours. Its also covered by a lifetime warranty. Its designed to be 18 times brighter than traditional incandescent bulbs. Our original Festoon bulb is an incandescent light that produces a lot of heat and a yellow colored light. Our LED replacement is not going to produce hardly any heat and it will provide a nice bright white light.


Putco PURE Headlight Bulbs Installation - 2005 Chevrolet Tahoe

Today on our 2005 Chevy Tahoe, well be installing the Putco Pure High Performance Halogen light bulb, part number p239006sw. This will be bulb type 9006 that will carry 55 watts at 12 volts and has a one year warranty. To replace the bulb, well simply open up the hood and then for this application we need to remove the headlight bucket. To do this well remove the two pins that secure it in position by turning the pin 45 degrees well go ahead and release it from its lock and pull up removing it. Well go ahead and work the headlight bucket out to where we get access to the wiring. Now well go ahead and take the low beam or outside light socket out of the headlight bucket by turning it, unlocking it from its tabs.


CIPA EVO Formance Mega LED Dome-Light Kit Review

Today well be reviewing the Cipa Evo Formance Mega LED dome light kit, part number CM93346. This Formance Mega LED dome kit comes with a light board and four adapters. The light board of this kit is two inches long by three quarter inches wide, and has 10 bright LEDs. Now well go ahead and go over the adapters. It comes with a 194 wedge, a twist socket, a one and a quarter inch festoon and one and a half inch festoon. The back side of the light board has a sticky adhesive to stick to the top of the inside of the dome light.


Putco Stick T-Type LED Bulb Review

Today were going to review the Putco Stick type LED bulb, part number P28003W-P. These LED lights are designed to fit in your 194 wedge style light bulb socket. These lights have an estimated life of 50,000 hours and are made here in the U.S.A. They produce a white light at a color temperature of about 6,000 kelvin, and put off about 100 lumens of light. On the top of the stick is where well find our single diode that produced our light. The lights are built on printed circuit boards that have the same contacts back here as your 194 glass wedge style bulbs would have.


Articles about Lights



Lights Questions and Answers

  • Headlight Bulb Recommendation for a 2009 Ford E-350 Super Duty
  • We do have halogen headlight bulbs that will fit your 2009 Ford E-350 Super Duty, but the H4 bulbs, # P230004NW, that you referenced will not fit. Instead, your vehicle will need H13 bulbs like the Putco PURE High-Performance H13 Halogen Bulbs, # P230012NW. These bulbs can be used for low or high beam headlights and have the same Night White color as the bulbs you referenced.
    view full answer...

  • Will Pilot Universal LED Tailgate Fire Strip # 360439 Fit 1986 Dodge Ram D150
  • According to my contact at Pilot, the Universal LED Tailgate Fire Strip # 360439 is a universal fit, meaning that it is not made vehicle specific. It is simply a 60 inch strip of LED lights that as long as you have the pigtail that you mentioned you should be able to use this on your 1986 Dodge Ram D150. I have attached a FAQ article referencing wiring hook-ups.
    view full answer...

  • Replacement 1157 LED Bulbs for Bargman 92 Series Trailer Tail Lights
  • First, what a lot of people do not know about LED lights is that if you are using them behind a red lens then the LED bulb needs to be red as well. Otherwise you will end up with a dim pink light when using white LEDs. LED bulb # P241157R-360 is a pair of red LEDs so they would work well behind a red lens. When used as stop, tail, turn bulbs behind a red lens they are DOT compliant. The 360 degree bulbs will not be as bright as the uni-directional lights like # P281571R-P which have a 240
    view full answer...

  • Are Blue Headlights and Fog Light Legal on a 2008 Chevy Silverado
  • Any color other than white for headlights is NOT DOT approved unless you are only using them as off-road or race lights. For a 2008 Chevy Silverado the low beam you could use is # P230011SW or # CM93390. The same color rule applies to the fog lights. For fog lights on your truck use # P230001SW.
    view full answer...

  • Are Two Lights Included with Off-Road Light Kit # MH-400D and are the Lenses Clear
  • The Off-Road Light Kit, # MH-400D, includes 2 lights. The lenses are best described halogen headlights like what used to be on cars. I would say it is translucent, not completely clear.
    view full answer...

  • Which Color Replacement LED Bulb for Turn Signals and Reverse Lights on 2003 Ford Excursion
  • For best visibility, you will want to use the bulb whose color is the same as the color of the lens. For your directional/ brake lamps, I would recommend the Putco # P283571R-P you mentioned. For the reverse lamps, use the white 3156, part # P283561W-P.
    view full answer...

  • Can Westin Driving Lights, # 09-0305, be Mounted Upside Down
  • The Westin Driving Lights, # 09-0305, can be mounted upside down, right side up, diagonally, side ways, horizontally, vertically, and any other configuration you can think of (within the limitations of its little mounting bracket of course). Basically, mount them how you want, where you want with the lens pointed in the correct direction for your application and they will work just fine.
    view full answer...

  • Are the Putco 3157 LED Flashing Brake Lights Brighter than Incandescent Bulbs
  • The Putco 3157 LED Flashing Brake Light Bulbs # P235357R are very bright. They would be much brighter than incandescent bulbs and are nice because they flash 3 times when activated as a brake light to increase attention to drivers behind you. If you check out the link I attached you can check out a video on that page that shows a different colored version of these lights being tested to give you an idea how bright they are. You should note that these lights are not DOT approved and you wou
    view full answer...

  • Putco part # P980586 Installation Instructions for 2013 Cadillac SRX
  • The Putco part # P980586 kit contains seven pieces. Two are for the map lights and five are for your dome light. According to both Putco and the Cadillac 2013 owners manual, there are several different dome lights located around your sun roof. The five lights that are designated for your dome light are actually for all of your dome lights in your 2013 Cadillac SRX. According to my contact at Putco, installation is rather easy. She said, to install the bulbs, you need to carefully use a flat h
    view full answer...

  • Installation Instructions for the Westin Off-Road Driving Lights # 09-0505
  • I attached a picture of the installation instructions that come with the Westin Off-Road Driving Lights # 09-0505 that you referenced.
    view full answer...

  • Which Putco Type 3157 LED Bulbs to Replace Standard Bulbs in 2007 Dodge Nitro
  • When changing from incandescent or halogen type bulbs to LEDs, load resistors will be required. The Putco type 3157 LED bulbs in Amber color for your 2007 Dodge Nitro are part # P233157A360. These are sold as a set of two, but they are also available singly as part # P233157A-360-S. Use of these bulbs in your Nitro requires load resistors on each turn signal circuit. We offer a pair of resistors as part # P230004A-2, which includes 4 quick-connect clips. Installation instructions are included
    view full answer...

  • Availability of 1 Inch Diameter Round Clearance or Marker Lights
  • We offer a 3/4 inch diameter round LED lamp that sounds like what you might be looking for. In amber, use part # MCL11CAKB or for red, use part # MCL11CRKB. These lamps are actually intended for use as clearance or marker lights on a trailer, so I would suggest that you check on the legality of what you are wanting to do. Your state police or highway patrol should be a good resource for determining what is legal in your area.
    view full answer...

  • Brightness and Compatibility of LED Replacement Bulbs for Back-Up Light on 2007 Honda Ridgeline
  • Not all manufacturers of after-market LED lighting products publish lumen ratings for their products. It is certainly fair to say that after-market LED bulbs are sometimes brighter than their OEM counterparts and are almost always much brighter than incandescent types. Putco brake and back-up bulbs of the same type are rated the same. The Putco 360-type Plasma 921 LED Bulbs (2), part # P240921W-360 are rated for 85 lumens according to my contact at Putco. However, they also offer the 100
    view full answer...

  • Will Changing from a 55W Bulb to an 85W CIPA EVO Alfas Bulb CM93442 Damage Vehicle Wiring
  • A watt is the amount of work done when current flows through at a certain voltage. In terms of light bulbs like the # CM93442 CIPA EVO Alfas you referenced, this would be how much light is emitted when the light is installed in a 12V system on a vehicle. The increased wattage itself will not harm the vehicle lighting system. Your concern will be whether the increased amperage would be too much for the circuit to handle. Comparing a 85W bulb to a 55W bulb, you would be seeing an increase of
    view full answer...

  • How do you Replace the Bulbs of the Westin Off-Road Driving Lights # 09-0505
  • I spoke to my contact at Westin and he informed me that in order to replace the bulbs of the Westin Off-Road Driving Lights # 09-0500 you will need to remove the screws from the back of the light assembly, slide the assebly apart and then remove the lens and you should be able to access the bulbs to replace them.
    view full answer...

  • Removing Lens to Install LED Interior Bulbs on a 2012 Mercedes GLK
  • There are some generic instructions on how you can remove the lens to install the lights # P980304. I have linked them for you. The best way is to use a very small screwdriver, like one you would use to adjust eye glasses, and gently pry the lens off to access the lights. The Putco kit also has a total of 5 bulbs: a pair and then 3 of a kind for a full house of bulbs. You can tell you have a bulb in the right place because the larger ones (the pair) should not fit in a slot for the 3 of a kin
    view full answer...

  • Are Optronics LED Lights, Part # LS-108, Suitable for Use on Camper for Illuminating Perimeter
  • LEDs are a great choice for providing maximum light output with minimal current draw and also avoid the need to replace worn out bulbs. We offer a range of such products with varying numbers of LEDs and in different shapes to suit many applications. Please note that these items are typically not DOT-approved for use as primary vehicle lights, but are perfect for secondary uses such as your application on the exterior of your camper. The LS-108 uses 12 LEDs per 6-1/4 x 1 inch housing and i
    view full answer...

  • Exterior Vehicle Lights for a 2008 Scion tC
  • The list of vehicles that would take a 9007 bulb is massive. Instead of trying to compile a list it would be much, much easier to tell me what vehicle you have and I can determine what bulbs should fit it. It looks like the 2008 Scion tC will take either a 9006 or H11 low bean and a 9005 high beam. I have included a link to the exterior lights we carry for the 2008 Scion tC.
    view full answer...

  • Low Beam H11 Bulb Recommendation for a 2011 Chevrolet Silverado
  • The 2 replacement 194 bulbs included with the CIPA EVO Formance Spectra H11 Bulbs, # CM93387, are just additional bulbs that CIPA packages with their Spectra bulbs. You could use them to replace the bulbs in your headlight markers, side markers, dash, interior or any light that accepts a 194 wedge bulb. These lights will definitely be brighter than the factory low beam headlight bulbs on your 2011 Chevrolet Silverado, but it is not going to look like you are driving down the road with your h
    view full answer...

  • Can the Ball Mount Hitch Light be Wired into the Reverse Light and Running Light Circuits Together
  • You will only want to wire in the ball mount hitch light # CR-607 to one circuit. The problem is that if you tired to wire it into 2 different circuits there will be back feeding problems. If you want more control of when the light is on I recommend connecting it to the running light circuit. However, this would mean that driving at night, the light would be on all the time. It is best to have it attached to the reverse light circuit. I have included a link to a video demo of this light for you.
    view full answer...






Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email




etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com