Custom Fit Roof Rack Kit With Y00248 | Y00429 | Y53TR
(83 reviews)
Price: $688.85
Custom Fit Roof Rack Kit With Y00248 | Y00429 | Y53TR
Item # Y44WB
Our Price: $688.85
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
- All Info
- Reviews (83)
- Q & A (0)
- Videos (51)
- Photos
Yakima Roof Rack - Y44WB
- Aero Bars
- Crossbars
- 60 Inch Bar Space
- Yakima
- Silver
- Overhang
- 2 Bars
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Yakima 60" JetStream MD - Silver:- Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers and a fit kit to create a complete roof rack
- Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
- Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
- Aero-style bars reduce drag to help maintain fuel efficiency
- Full-length design maximizes space for carriers and accessories
- Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
- Works with most universal-mount bike, water, snow, and cargo carriers
- Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
- Simply push down on the SmartFill strips to slide in accessories - no trimming required
- Bottom channels allow for easy installation on Yakima towers
- Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
- Etched measurements on bottoms of bars help center rack on your roof
- Lightweight aluminum bars are durable and rustproof
- Internal JetTruss extrusions provide exceptional bar strength
- Clear anodized alloy finish is corrosion resistant
Yakima Landing Pad 22 (Set of 4):
- Provide mounting points for Yakima SkyLine or Control towers
- Pads install in your vehicle's fixed mounting points
- Protect your vehicle from scratches with UV-resistant, rubber base pads
- Include snap-on covers for protection when towers are not in place
Yakima SkyLine Towers (4-pack) (w/new covers):
- 4 Heavy-duty towers mount Yakima crossbars to your vehicle with fixed mounting points, flush side rails, or tracks
- Pair with 2 Yakima crossbars and Landing Pads to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
- Also fit RoundBar crossbars with adapter
- Easy, tool-free installation - just drop tower onto Landing Pad and close the cover
- Included torque tool clicks 3 times when crossbar is tightened to tower - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Weather-resistant die-cast aluminum, stainless steel, glass-reinforced plastic, and elastomer construction
8000248 Landing Pad 22 for Yakima SkyLine and Control Towers - Qty 4
8000429 Yakima Jet Stream Cross Bars - Aluminum - 60" Long - Qty 2 - Silver
8000163 Yakima Timber Line Roof Rack Towers for CoreBar, JetStream, and RoundBar Cross Bars - Raised Side Rails - Qty 2
Replaces 8000148
Video of Custom Fit Roof Rack Kit With Y00248 | Y00429 | Y53TR
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima Crossbars SkyLine Towers Review
Hey everyone, it's Evangeline here at etrailer and today we'll be taking a look at our Yakima SkyLine towers. These are designed for your fixed mounting points, your flush rails, or your track systems. So if the roof of your vehicle looks like this, you probably need these. If you wanna carry around roof mounted accessories like kayaks or ladders or maybe you need to bring a Christmas tree home, you first need a roof rack system. Now this is gonna be the Yakima SkyLine towers for those vehicles that specifically require a custom fit kit for their fixed mounting points. Now if your vehicle does not look like this you might have a naked roof or raised rails.
That's why it's very important before anything to use our fit guide here at etrailer.com. Put your year, make model and then find the right fit for you. And if this is one of them let's take a look at how it works. Etrailer.com also helps you get the full kit for your vehicle because the skyline towers don't work alone you also need the appropriate crossbars as well as the correct fit kit or landing pads for you. But with this, you get a low profile roof rack so it doesn't stick too high up.
You get a heavy duty weight capacity since this is an aluminum roof rack. So usually they have 165 pounds capacity, depends on the vehicle, and you have this very sturdy but also very custom fit kit for your vehicle. That way, no matter what you put on it within reason and wherever you go, you know it's gonna stay there. But my favorite feature about this roof rack is the door design. So you pinch on the door to open it and that's it.
Just like that, you can lift the whole roof rack off of your roof. When you need to install it, you just pop it right back on. So the height of the tower is about 3 1/2" from your fixed mounting point to the top of the tower. The actual height can change depending on what crossbars you have and what rails you have, but compared to a lot of the other flush mounted crossbars and roof racks, it's just very low to the roof. Now with this style of a rack though, you are limited to the fixed mounting points or the flush rails of your vehicle.
So wherever they are, that's how much crossbar spread you get. For example, ours is set to 28" apart. On the other hand, if you have an aggressive tilt to your roof, you can actually adjust this up to six degrees forward or six degrees backward to help even out the playing field. Now I like to leave my roof rack on my vehicle and Yakima is pretty known for its durability. So the SkyLine towers are made of glass reinforced plastic, aluminum, stainless steel and elastomer. So all that is combined to help them stay strong even if you leave them on all day, all year. But if you do need to take off your roof rack you also have a feature to make it more low profile. Start by flipping both doors open and then you can lift the roof rack up and off of your roof. This way you can store it inside of your garage or in your house. You can leave your base on your roof rails. All you need to do is cover them with the included cover and that's it. You're done. The covered bases sit about 2" high up off of your fixed mounting point and makes for a much more low profile look. Your towers will have everything you need to install them which really is just one tool. And your fit kit has the hardware needed to undo the factory mounting points on your vehicle or for your track system if that's what you have. Now, that install process is extremely simple. Let's take a look at it. So these are what your towers look like when they are not on your roof. So they come all assembled in the box. All you need to do is get the appropriate landing pads for your vehicle. These landing pads can look different depending on your car and that's why it's very important to use our fit guide to get the right fit for you. You have four towers as well as the torque tool. And depending on your crossbars, you will also get a separate adapter to be used with those specific bars. With your landing pad kits, you'll get a part that fits your specific vehicle. You will get the hardware needed to install that part and you will have the base as well as the base cover. So if the towers are not on your vehicle you could just cover that base pad and take the cover off to install the tower. Here's an example of how the landing pad can be used depending on your cars. So you have a factory mounting point in this specific flush rail. So the pad goes over that hole and then you're gonna get your base which goes on top of that pad. And then you have a bolt with split washer and flat washer which is used to tighten down those two pieces to your car. The torque tool for your towers comes in handy whenever you're tightening down those bolts because it has a setting for tension. Once you get enough tension, it automatically clicks and prevents you from over tightening. Now to set up your tower for your crossbars there's different adaptor pieces. We're using the one for the JetStream crossbars. So we start by pushing in this plate into the tower. So you are gonna hear some clicks and that's how you know it's secure. Now we're gonna open up the tower door. So this involves pinching the door and pulling. Be careful because if you slide your fingers forward it doesn't feel as good. But with the door open, you can then loosen this bolt up front. It says to do it eight times. I just go until the bolt underneath is visible so you can see underneath what I mean. Notice how you have this little bolt head hiding around. You're gonna try to get at it with the tool. You can see how I do have access. That means as we flip this tower back over I can put this plate up top and then I can tighten down and thread onto that plate. With adapter and plate, this can now slide into your crossbar. For other adapters, they're designed to slide over or around your crossbar. With this specific style, I do recommend for the initial slide making sure that this is loose, but after that even if you have it fully tightened down you'll still be able to slowly adjust it on the crossbar. So with the towers on you're then ready to put this onto your roof. Now what I do is I just kind of roughly measure how far apart our landing pads are and that's when I can measure on the towers the distance apart they roughly need to be, in my case, 43 1/2. You could be off by 1/2" or so 'cause you can still move them. Also, supposedly this is when you put the rubber pieces inside of your crossbars. I do that after I've already installed them onto the roof. I take them back off and then I push them in so that I know exactly where the towers will be sitting. Make sure your towers are torqued down at their bottom bolt. Do that for both sides before installing. This is a lot easier with a friend on the other side but still doable with one person. So leave those doors open so that you can gently place them onto your roof. The bottom bracket with the door open fits onto your base so see how that just pushes into place. And then to secure it, just push that door close and you've got a sturdy fit. If you're using Yakima same key system lock cores, this is a time to switch them out on your towers. But other than that, just double check that all the towers are strong and secure and everything is sturdy. And that's it for the install of your roof rack. That right there was a look at the Yakima SkyLine towers for your Yakima crossbars for when you have vehicles that have fixed mounting points, flush rails or track systems.
Customer Reviews
Custom Fit Roof Rack Kit With Y00248 | Y00429 | Y53TR - Y44WB
Average Customer Rating: 4.9 out of 5 stars (83 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.by: John11/16/2023
Mazda
Great quality! They come with two different style bases. One flat, and one that is stepped to account for the raised area near the gutter trim. Good variety of screws to meet your application. My 2015 Mazda 3 (with fixed points) needed the medium length screws. Seems very solid!
I left the plastic gutter moldings on and just drilled holes for the screws to go through.
by: Eric 05/13/2024
Fit our Subaru Forester perfectly. Install was a breeze. For the money I wish they came with the core locks.
by: Dave05/06/2024
Everything came in a timely manner and ready to install. Looks great, solid rack.
by: John11/16/2023
Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.
by: Hurtlocker08/12/2023
Strong, Solid Bars, Super Light, and really easy to install!
by: William02/28/2024
You guys provide great products and excellent customer service.
Thanks
by: Layne 02/11/2024
These crossbars were easy to install and adjust. Be sure to get all the pieces you need. There is no mention of the Landing Pads necessary to use these.
by: Kevin 09/14/2023
Parts arrived quickly. Installation was a breeze. Everything needed for a quick and professional installation was included in the shipment.
by: Michael P.01/22/2023
Mercedes-Benz
Yakima Landing Pad 22 is the only product I could find that is suitable for my Mercedes E450 Coupe. The car's panoramic glass extends close to where the fixed mounting points are, but Yakima has accounted for that by designing the LP 22 so that the small part that sits on the glass is not transferring the load. Also, the LP22 accommodates the flip-open doors for the four fixed mounting points on the Mercedes. Yakima instruction manual and etrailer.com videos are highly useful.
Only complaint is with the LP 22 Covers, which are supplied for when the roof rack (Towers and Crossbars) are removed. These covers are not usable - they do not snap into place and appear as if they were designed for a different landing pad. This is not a deal breaker for me because I remove the LP 22s whenever I remove the roof rack, but it will likely be a concern for others.
by: Michael01/22/2023
Yakima SkyLine Towers are well-designed and well-executed. They easily fit into the Yakima Landing Pads and form a tight fit when closed. And they also fit nicely into the Yakima JetStream Crossbars when following the Yakima instruction manual and various YouTube videos. I did run into a snag at first where I found the rubber seal on one SkyLine Tower getting caught on the JetStream Crossbar track, but after that I was careful not to let that happen with the other towers.
I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design.
by: Dan 11/06/2023
Great company. Fast delivery.
by: Philip 05/29/2023
These really look so much better then the factory racks! Easy to install. Easy to order! Great product!
by: Steve K.04/23/2019
Easy to install thanks to the etrailer video. I have used the rack system on many long distance trips including driving from South Carolina to Yellowstone.
by: Troy01/22/2022
Easy to install and sturdy. I carry a 9' pontoon boat on my camper shell using this rack at freeway speeds with no problems.
by: Richard 04/06/2023
Happy with the purchase. Crossbars shipped and received quickly.
by: Adrian 03/19/2020
Product required a bit of customizing because the pads are a little tall and hollow, so when you tighten center bolt, pad will try to collapse inwards unless you find a proper spacer in length under the pad (NOT PROVIDED BY YAKIMA, NOT ETRAILER'S FAULT), but once that spacer was put in place, it turned out beautifully.
by: Emerson07/20/2020
All parts arrived in good order, haven't completed assembly yet as I had cross threaded one of the support brackets. Hopefully soon
by: Oliver H.05/30/2021
BMW
Used these on my 2011 BMW 335. It took a little while to get the threads to catch on the roof attachment the first time I installed them. Otherwise they do what they are supposed to do and don't scratch the roof.
by: Sara03/19/2019
Yakima is always great, the bars are just right for my kayaks and look great too.
by: Jered12/19/2020
Over the years I have purchased many items from etrailer.com. They have great customer service, fast and free shipping. The product they carry are industry proven and of high quality. I have been very satisfied with their service.
by: Christopher 12/22/2019
Kia Soul
The fit is good, but there was a mistake in Yakima’s fit guide for my 2020 Kia Soul. Yakima said to use the 28mm screws but those would not reach the threads. The 33mm screws (which were also included) worked perfectly.
by: Angela04/08/2021
Very happy with our purchase. I love how easily you can remove the entire rack easily. Too bad the locking mechanism comes separately but we are still happy with what we received.
by: Dominic 11/14/2020
Rook Rack went on easy and looks great
by: Michael01/22/2019
The items ordered fit great and were delivered promptly! Etrailer came through with product options, fit for my vehicle, and great pricing. Will use again for sure!
by: Angel Velez05/12/2021
Top of the line!!
25
669
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- Will Rhino-Rack Crossbars Fit On Yakima BaseLine Towers? The top channel on most crossbars like the Rhino-Rack and Yakima are similar but you should never mix and match towers and crossbars between different manufacturers. Their components are designed to work specifically with each other and your Yakima towers may not work properly with the Rhino-Rack crossbars. Instead you will want to stay with the Yakima crossbars from the list below to ensure they fit together properly and you have a manufacturer who will stand behind the warranty for the...
view full answer... - Parts Needed To Install 60" JetStream Bars On A 2021 Toyota Tacoma Double Cab With Factory RailsWe can definitely help set you up. To install a pair of 60" Yakima JetStream bars on your 2021 Toyota Tacoma Double Cab with factory rails, all you will need is a set of TimberLine Towers # Y33TR, and your crossbars. We have the 60" JetStream bars available in silver # Y00429 or in black # Y00426.
view full answer... - Yakima Roof Rack that Fits 2019 Honda Passport with Raised RailsSince your 2019 Honda Passport has raised rails the roof rack feet that fit it are the ones that wrap around the bars whereas the flush bar roof styles are the ones that have options that attach directly to it. So for a Yakima there is the Jetstream part number # Y00429 and # Y33TR which is an aero shaped bar setup that wraps around your raised rails. This is a very solid setup that will work great and is no less reliable than any other option.
view full answer... - Whats The Longest Roof Rack Available For 2023 Toyota Highlander For Thule HullavatorThe longest crossbar that'll work with the flush roof rails on your new 2023 Toyota Highlander Hybrid Platinum is 50" and is the Yakima roof rack system which uses the following parts: Crossbars # Y00429 Towers # Y53TR Landing Pad # Y66VR This will be long enough to use both but as each one weighs over 40lbs, plus the roof rack weighs about 15lbs you'd be overloading your roof with two kayaks and two hullavators as your roof only has a 165lb capacity per Toyota.
view full answer... - Roof Rack For A 2017 VW Golf Sportwagen To Use With The Thule HullavatorWe can definitely set you up with a roof rack for your 2017 Volkswagen Golf Sportwagen that is compatible with the Thule Hullavator # TH898. The Hullavator requires the crossbar to overhang past the tower by 4" to 8", so it will be best to use a solid aero bar setup with a slightly longer crossbar. For that I recommend the Yakima Jetstream roof rack. This will consist of the following parts: Yakima TimberLine Towers for Yakima Crossbars # Y33TR Yakima JetStream Crossbars - Aluminum - Silver...
view full answer... - Roof Cross Bars That Fit A 2015 Chevrolet Silverado 1500 With An A.R.E MX Bed CapTo install a roof rack on your A.R.E MX Bed Cap on your 2015 Chevrolet Silverado 1500, you're going to need to install a set of tracks like: -Yakima Tracks for Roof Racks # Y01126 for 42" long tracks, -Yakima Tracks for Roof Racks # Y01127 for 54" long tracks, or, -Yakima Tracks for Roof Racks # Y01135 for 60" long tracks. From here you'll need an actual set of crossbars like the: -Yakima JetStream Crossbars # Y00429, with the BaseLine Towers for Yakima Crossbars # Y28TR, and the Landing...
view full answer... - Roof Rack For 2015 Toyota Highlander For Naked RoofThe video you referenced is for a 2015 Toyota Highlander with flush mounted rails; I checked directly with Thule and they do not have a roof rack fit for a naked roof on a '15 Highlander, just one with those flush mounted rails. So if you want a rack, you'd need a new set up. For that I would go with Yakima, as it is the that is the most similar in quality to a Thule rack. The parts that make up a Yakima roof rack for your 2015 Toyota Highlander are the following: - Yakima JetStream...
view full answer... - What Roof Rack Do You Recommend for a 2007 Honda Element SC?Absolutely! For a great roof rack system that will fit your SC version of the 2007 Honda Element, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum - Silver - 60" Long - Qty 2 # Y00429 - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR - Landing Pad 9 for Yakima SkyLine and Control Towers - Qty 4 # Y00229 - (Optional for extra security) Yakima Same Key System (SKS) Lock Cores (QTY 2) # Y07202 With the above...
view full answer... - Recommended Roof Rack For A 2023 Toyota RAV4 With A Thule Hullavator Hi Cathy, To ensure that you can get the extra extension to mount the Thule Hullavator # TH898 you'll want to go with a Yakima roof rack system. Yakima crossbars run their mounting track the entire length of the crossbar so you can go with ones that are longer than your typical length without worrying if the mounting feet will be able to connect. You'll want the following components: Yakima JetStream Crossbars - Black - 60" Long # Y00426 or silver # Y00429 SkyLine Towers for Yakima Crossbars...
view full answer... - Yakima Crossbar Length For 2022 Lexus GX 460 & HullavatorI checked with Yakima regarding the crossbar length, and they do say 50, which is odd for your 49 inch rails. With that distance between your rails, don't use the 50 inch bars, use the 60 inch long JetStream bars, either Silver # Y00429 or Black # Y00426. The rest of the parts for the Yakima rack on your 2022 Lexus GX 460 remain the same; Towers # Y53TR, Landing Pad 30 # Y25ZR and Lock Cores # Y07204.
view full answer... - Best Roof Rack For 2024 Kia EV9 With Raised Side RailsThe best roof rack for your 2024 Kia EV9 with raised side rails is from Yakima, and consists of the following part numbers: - Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426 - TimberLine Towers for Yakima Crossbars # Y33TR I really like the Yakima brand due to how quiet the bars are; they have what are called "WindRidges" on top that control the flow of the air both over and under the bar, which minimizes both vibration of the bar and wind noise. It is also highly durable,...
view full answer... - Roof Rack Recommendation for 2021 Toyota Highlander with Naked RoofHey Ronnie, I attached a link to this page that shows all of the roof racks that are a fit for your 2021 Toyota Highlander with a naked roof but my favorite option is the Yakima Jetstream part # Y00429, # Y28TR, # Y06153, # Y06132 as we had chance to install all of the racks we carry and we all agreed the Yakima racks are the nicest and the easiest to use. This is a through bar design which means the bars are longer than the feet of the rack which is great for if you need max bar space. If...
view full answer... - Recommended Roof Rack for a 2023 GMC Yukon XLTo add a roof rack to your 2023 GMC Yukon XL, you will want the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 Black or item # Y00429 in Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UV I have attached a couple of pictures below that will show you what this roof rack looks like and how to...
view full answer...
- Square Bar Roof Rack that Fits 2020 Ram 1500 Quad CabThule offers a square bar roof rack that fits your 2020 Ram 1500 quad cab with the part # TH712500, # TH710501, and # TH145199. Then for a square bar roof rack the Thule Portage part # TH819 would work great.
view full answer... - Rooftop Cargo Carrier Recommendation for 2020 Toyota Highlander with Panoramic RoofFor a great option for your 2020 Toyota Highlander with panoramic bare roof, I recommend the Thule Force XT XXL # TH6359B. This box has the largest internal dimensions out of all of our cargo boxes. It also comes with a dual-opening lid that can be accessed from either side of your vehicle. I confirmed that your trunk can fully open with this box mounted on your roof. If you already have crossbars, I recommend measuring your bars to make sure they do not exceed 3-1/2" wide x 1-11/16"...
view full answer... - Recommended Roof Rack for a 2024 Nissan Pathfinder w/ Raised Rails I would be happy to! To add a Yakima roof rack to your 2024 Nissan Pathfinder you will need the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 item # Y33TR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft. A great perk of Yakima's products is you can...
view full answer... - Yakima Jetstream Roof Rack that Fits 2024 Ford Escape with Naked RoofYes, we do have a Yakima Jetstream roof rack that fits your 2024 Ford Escape with the part numbers # Y00429, # Y28TR, # Y06137, # Y06152. We recently installed all of the roof racks we offer and everyone agreed the Jetstream was the nicest and easiest to install.
view full answer... - How to Determine Correct Roof Rack For 2024 Kia TellurideI'm going to go ahead and respectfully disagree that we're idiots, Paul. I'm confident we can figure out the combination for a roof rack on your 2024 Kia Telluride, and there are three possible options Kia has for your roof - flush-mounted rails, raised side rails, and a bare roof. I made some diagrams below showing test fits on a Kia Telluride with photos from the nice folks at Yakima so you can see the difference (please note these are just test fit photos, and not exactly how the rack...
view full answer...
- Roof Rack for Thule Canyon XT Roof Cargo Basket on 2020 Subaru AscentYour 2020 Subaru Ascent will require a roof rack to carry any cargo basket, including the Thule Canyon XT Roof Cargo Basket # TH859XT. Assuming you have raised side rails that run front to back on your Ascent, here is the roof rack that will work with your Subaru: - Yakima JetStream Crossbars # Y00429 (Silver) or # Y00426 (Black) - TimberLine Towers for Yakima Crossbars # Y33TR As for the paddleboards, there isn't anything designed to carry them in a cargo basket so you can use whatever...
view full answer... - Recommended Roof Rack for a 2024 Acura MDX w/ No Roof Rails Yes, we do! To add a roof rack to your 2024 Acura MDX with a naked roof you will need the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06163 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06178 This aero bar roof rack system has a 165 lbs capacity....
view full answer... - Recommended Roof Rack for a 2024 Acura RDX w/ a Naked Roof Congrats on the new SUV! Yes, we do have a way to attach a roof rack to your 2024 Acura RDX even though you do not have roof rails. It is the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06174 BaseClip Fit Kit for Yakima BaseLine...
view full answer... - Yakima Roof Rack for 2018 Honda Odyssey that Can Fit Thule Hullaport XTThe Yakima HD bar is too thick for the Thule Hullaport XT part # TH849000 to attach to so for your 2018 Honda Odyssey you'd be better off with the JetStream roof rack part numbers # Y00429 and # Y33TR.
view full answer... - Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
view full answer... - Recommended Roof Rack System For 2021 Kia Telluride LX with Naked RoofThe only company at the moment (June 2023) that makes a roof rack system for your 2021 Kia Telluride LX with a naked roof is Yakima, so for a roof rack system you'll need the following components: Crossbars # Y00429 Feet # Y28TR Fit Kits # Y06125 and # Y06165 I'd also recommend adding the locks # Y07204 to secure the roof rack to your roof to deter theft. Out of all of the crossbar options for your vehicle this is by far the best due to the Aero design to cut down on wind noise the most,...
view full answer... - Comparing Steel and Aluminium Crossbars for a 2020 Jeep Grand Cherokee with Flush TracksIn regards to choosing between steel and aluminium crossbars, I recommend aluminium because they will be lighter and offer better protection from the elements. The steel crossbars do have higher weight capacities but this would not be a factor as you will be limited by the mounting feet anyway. For a 2020 Jeep Grand Cherokee, the Yakima JetStream Crossbar System part # Y00425, part # Y53TR, and part # Y00244 is what I recommend for models with black and chrome tracks or matte black and...
view full answer... - Using Longer Crossbars for Roof Rack on 2021 Toyota RAV4 with Flush Roof RailsGreat questions. I have a solution for you to use longer bars, but the Thule WingBar Evo crossbars only have a limited amount of space for the T-Slot on the underside where they connect to the legs and there isn't enough space for you to go with longer bars. So instead I recommend going with the Yakima JetStream system as the T-Slot on the underside for this system runs the length of the crossbar so there is no limiting factor. 50" JetStream Crossbars - # Y00425 OR 60" - # Y00426 SkyLine...
view full answer... - What Parts do I Need to Install the Yakima HD Crossbars on My Retrax Tonneau Tracks?For the correct mounting brackets to mount the Yakima HD Crossbars - Aluminum - Black - 78" Long # Y01159 to your Retrax tonneau cover like the # RTX47SR, you need the following parts: - HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03541 - SkyLine Towers # Y53TR - Two sets of the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 - Yakima Same Key System (SKS) Lock Cores part # Y07204 These are all the components you need for installing...
view full answer... - What Rooftop Basket and Roof Rack do You Recommend for My 2004 Toyota Tacoma Regular Cab?We have what you need! If you are looking for a great basket for your standard/regular cab 2004 Toyota Tacoma, I recommend using the SportRack Vista Roof Mounted Cargo Basket - Steel - 44" Long x 39-1/8" Wide # SR9035. This basket is large enough to provide you with the space you need on your roof, but small enough not to impede visibility out of your front windshield while driving. It is important to note, though, that in order to use this basket on your roof, you need to have at least...
view full answer... - What do I Need to Mount the CoreBar Crossbars # Y00421 to My Flush Rails on My 2017 Honda CR-V?Yes! As long as you have the exact same OEM flush rails that come with 2017 Honda CR-Vs that have the flush rail option from the factory, you can use the Yakima SkyLine Towers # Y53TR with your CoreBars # Y00421. In addition to these parts, you also need the Landing Pad 19 # Y00245 in order to mount the towers to the fixed mounting points in your rails. If you need the peace of mind of adding locks to the setup, those are the Yakima Same-Key Lock Cores # Y07204. These lock your crossbar...
view full answer...
- How Can I Attach A Yakima LockNLoad Platform To My 2022 Subaru Outback Wagon W/ Factory Roof RackYou will be able to carry a LockNLoad Platform on your 2022 Subaru Outback Wagon, but it will not fit on your factory cross bars. In order to carry this platform, you will need the following: SkyLine Towers for Yakima Crossbars, part # Y53TR, Landing Pad 27, part # Y46VR, Yakima LockNLoad Platform Rack for Crossbars, part # Y05044-39 LockNLoad SL Adapter, part # Y05042-2, and the Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204. This roof rack setup will allow you to...
view full answer... - Roof Rack for 2017 Ford Explorer Compatible With Thule Hullavator ProThere is a roof rack for your 2017 Ford Explorer that is compatible with the Thule Hullavator Pro Kayak Carrier and Lift Assist # TH898, although the 53 inch bars of the Rhino-Rack system are not going to be quite long enough to work. Due to that, in order to get long enough bars you will need to go with the Yakima roof rack. The reason is due to how crossbars mount; they foot pack that attaches to the bars slides into a channel underneath the crossbars. That channel on the Rhino-Rack...
view full answer...
- Parts Needed to Add Thule or Yakima Roof Rack to Truck Cap with OEM TracksWe definitely have Thule and Yakima roof racks that fit the OEM tracks that came on your A.R.E. Overland truck cap. Some of it depends on what length of crossbar you need, but I'll add the fit kit and leg information and then we can figure out what crossbars you need from there. Thule System: Length of crossbar - measure from center of track to center of opposite track and choose similar length crossbar like the 60" WingBar Evo # TH711520 Rapid Podium Feet - # TH460R Fit Kit - # THKIT3101 Yakima...
view full answer... - 2012 Toyota Sienna Roof Rack Recommendation for Roof Top TentFor 2012 Toyota Sienna I recommend going with the Yakima JetStream roof rack setup. This mounts to the raised rails on your vehicle and it uses straps for the rails as opposed to the Landing Pad setup: 50" JetStream Crossbars - Black # Y00425 TimberLine Towers - # Y33TR Lock Core Kit - # Y07204 (optional) You can mount an aftermarket rail system to the roof of your Sienna but you'll have to remove the OEM raised rails to accomplish this. If you choose to do that then you can use the following: 42"...
view full answer... - Recommended Roof Rack for a 2012 Land Rover Range Rover SportThe roof rack I recommend for a 2012 Land Rover Range Rover Sport will be dependent on roof configuration. If you have a bare roof then I recommend the Thule WingBar Evo Crossbar System part # TH711520, part # TH710501, and part # TH145116. If you have factory installed tracks then I recommend the Yakima Jetsream Crossbar System part # Y00426, part # Y53TR, and part # Y00224. These are both excellent top-of-the-line options.
view full answer... - Can 2 Yakima ShowDown Carriers be Used on a 2018 Jeep Grand CherokeeTo use the Yakima ShowDown # Y04081 you would need a roof rack where the crossbars extend past the legs at least 3-1/2". From what I can tell, the Mopar roof rack for your 2018 Jeep Grand Cherokee has crossbars that end where the legs fit. I do have a solution for you to carry your kayaks but when I reached out to my contact at Yakima she said you would need to at least use their 70" crossbar and that 2 of the ShowDown carriers will be at least 80" wide when placed side by side. Because...
view full answer...
- How To Use Yakima Round Crossbars on 2018 Tesla Model S with Panoramic RoofI do have an option for you but for the 2018 Tesla Model S you must use the Yakima Skyline Tower part # Y53TR and Landing Pad 22 part # Y00248. Then, in order to use the Round 58" CrossBars for Yakima Roof Rack System part # Y00409 you'll need the Yakima Round Bar Adapters part # Y03536. The Yakima Timberline Towers are not compatible.
view full answer... - Yakima Jetstream Roof Rack for 2019 Jeep Grand Cherokee with E-group PackageThe Yakima Jetstream roof rack made of parts # Y00425, # Y53TR and # Y00244 is a correct fit on your Grand Cherokee's E-Group roof configuration that has black and chrome tracks that are flush mounted and run front to back. Lock core kit # Y07204 is a correct selection and a worthwhile addition too for security. An install video is included for you. You do need to order each of these item numbers; we do not have one part for all. This rack features aerodynamic 50-inch crossbars that will...
view full answer...
- Roof Rack for 2007 Hummer H3 with Roof Rack ChannelsFor your 2007 Hummer H3 with the roof tracks like you pointed out we have the Yakima Skyline roof rack part numbers # Y00425, # Y53TR, and # Y00224 as a confirmed fit. This attaches to the slots you have and gives you a high quality rack that due to it's bar shape will be very aerodynamic.
view full answer... - Parts to Install Yakima 78 HD Crossbars and Watersport Carriers on a 2014 Jeep Wangler UnlimitedTo use your 78" Yakima HD Crossbars, part # Y01159, on your 2014 Jeep Wrangler Unlimited, you will need the Yakima 42" Tracks, Skyline Towers, HD Bar SL Adapters, and Landing Pad 1s. The Track Pads, part # Y01126, are designed for use on naked roofs (those without rails). They give a more flush look for the roof rack system. This will require some drilling into the hard top, but they allow you to slide the crossbars along the length of the Jeep. The Skyline Towers, part # Y53TR, are designed...
view full answer... - Will Older Thule Hullavator Work With Yakima JetStream Roof Rack on 2019 Subaru OutbackYour older Thule Hullavator 897XT will work with the Yakima JetStream crossbars for your 2019 Subaru Outback. The T-slot on the JetStream bars are 1" wide x 1/2" tall, which is actually slightly larger than the T-slot on the AeroBlade bars so you won't have any issues fitting the Hullavator into that T-slot. As for the length of the bars, I do recommend using the 60" Yakima JetStream Crossbars # Y00426 to ensure you have the needed space to use your Hullavator. The rest of the parts...
view full answer... - What Yakima Landing Pad Do I Need For My 2021 Subaru OutbackYour 2021 Subaru Outback Wagon needs Yakima Landing Pad 27 for Yakima SkyLine And Control Towers - Qty 4, part # Y46VR. This Landing Pad provides the mounting points for your Yakima Skyline or Control towers. If you are using the SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4,part # Y53TR, you need to make sure you are using the RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4, part # Y03536....
view full answer... - Roof Rack For 2019 Nissan NV200 Van With A Naked RoofIf you're looking to get a roof rack for your 2019 Nissan NV200, you don't need to purchase side rails because you can bolt a roof rack directly to the roof. All you need is the Yakima JetStream Crossbars # Y00425 the SkyLine Towers # Y53TR and the Landing Pad # Y00248. This is a much more cost effective way of getting a roof rack on your roof. Since your van is relatively long, you can get this Cargo Basket # Y07138 and this extension # Y07108 to really maximize what your NV200 can haul...
view full answer... - Will Yakima CoreBar Roof Rack for 2015 Toyota Highlander Allow fit Yakima Showdown Kayak CarrierI checked with Yakima just now and they have their Showdown Assisted Kayak carrier part # Y04081 as a fit with the CoreBar roof rack you also mentioned part numbers # Y00421, # Y53TR, and # Y00242. The bars are long enough for the carrier to fit and work well but wouldn't be obnoxiously long. You wouldn't have to worry about hitting your head or anything.
view full answer... - What Do I Need To Attach A Yakima Rack To My RetraxPro Tonneau CoverYour RetraxPro tonneau cover comes with T-slots. The Yakima rack that is compatible with t-slots will consist of the following: Yakima CoreBar Crossbars - Steel - Black - 70" Long - Qty 2, part # Y00423, SkyLine Towers for Yakima Crossbars, part # Y53TR, Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2. part # Y00221, X 2 Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204 This rack will have a weight limit of 220 lbs. The Yakima CoreBars are elliptical in shape...
view full answer... - Roof Rack Recommendation to Carry Thule Pulse Box on 2018 Toyota HighlanderIn order to carry the Thule Pulse Large Rooftop Cargo Box # TH615 on your 2018 Toyota Highlander you will need crossbars that are perpendicular to your vehicle body so that the box can be parallel with the vehicle body. I really like the Yakima JetStream roof rack system because the crossbars are higher quality with that aero-style design and the legs have adjustments so you get the best fit possible. I'm guessing you have a naked roof but in the event that you do have the flush mount rails...
view full answer... - Roof Rack Needed for 2021 Jeep Grand Cherokee Limited For Thule HullavatorFor your 2021 Jeep Grand Cherokee that has the flush roof rails that have the chrome center section for a roof rack the Yakima 55 inch HD bar setup part # Y01156, # Y53TR, # Y03541, and # Y00244 would be a really great option with plenty of capacity and bar space for roof top cargo. Now you'd only be able to fit two of the Hullavators part # TH898 based on how much space they take up and how they fold down etc. This rack can easily detach for the Yakima bars as it would fit into the top...
view full answer... - Parts Needed to Add Yakima Roof Rack to 2014 Acura MDX w/ Flush-Mount Side RailsIn order to add a Yakima roof rack to your 2014 Acura MDX with flush side rails, you will need the following parts: - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 19 for Yakima SkyLine and Control Towers # Y00245
view full answer... - Roof Rack For 2021 Subaru Outback For Rooftop TentTo use a rooftop tent on your 2021 Subaru Outback, you will need to add a roof rack, which will allow you to choose from a couple of different tent options. First let's start with the rack you'll need, which is from Yakima and consists of the following parts: - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 27 for Yakima SkyLine and Control Towers # Y46VR This is going to give your '21 Outback a very quiet,...
view full answer... - Does Yakima Roof Rack Come With Everything to Install on 2018 Subaru WRXYes the 2018 Subaru WRX Roof Rack by Yakima comes with everything needed to attach directly to roof of your 2018 Subaru WRX. This complete system is made up of Item Numbers: # Y00425, # Y00148, and # Y00248.
view full answer... - How To Use Yakima Round Crossbars on 2018 Tesla Model S with Panoramic RoofI do have an option for you but for the 2018 Tesla Model S you must use the Yakima Skyline Tower part # Y53TR and Landing Pad 22 part # Y00248. Then, in order to use the Round 58" CrossBars for Yakima Roof Rack System part # Y00409 you'll need the Yakima Round Bar Adapters part # Y03536. The Yakima Timberline Towers are not compatible.
view full answer... - Roof Rack For 2019 Nissan NV200 Van With A Naked RoofIf you're looking to get a roof rack for your 2019 Nissan NV200, you don't need to purchase side rails because you can bolt a roof rack directly to the roof. All you need is the Yakima JetStream Crossbars # Y00425 the SkyLine Towers # Y53TR and the Landing Pad # Y00248. This is a much more cost effective way of getting a roof rack on your roof. Since your van is relatively long, you can get this Cargo Basket # Y07138 and this extension # Y07108 to really maximize what your NV200 can haul...
view full answer... - Recommended Roof Rack for Bikes On a 2017 Subaru ImprezaIn order to carry bikes on the roof of a 2017 Subaru Impreza you'll need a roof rack, the Yakima JetStream Crossbar System part # Y00425, part # Y53TR, and part # Y00248 for hatchback or part # Y00233 for sedan models is what I recommend. Then for a bike rack, the Yakima FrontLoader Wheel Mount Bike Carrier part # Y02103 is a great option that wont require you to remove the wheel.
view full answer... - Roof Rack For A 2022 Subaru LegacyFor your 2022 Subaru Legacy, I recommend the Yakima HD Crossbars # Y01156. These bars are square like you mentioned you wanted, and, have a maximum weight capacity of 500 pounds. You are also going to need an HD bar adapter, and landing pads. The matching HD bar adapters are # Y03541, and landing pads are # Y00248.
view full answer... - Yakima Round Crossbar Roof Rack that Fits 2016 Ford Flex with Naked RoofFor your 2016 Ford Flex Limited Ecoboost the correct Yakima roof rack components to give you a round bar roof rack is part numbers # Y00409, # Y53TR, # Y03536, and # Y00248 which attaches to the railing on your vehicle roof.
view full answer... - Roof Rack for Carrying a Canoe/Kayak on a 2014 Subaru Impreza with a Naked RoofWhile we do have roof racks for your 2014 Subaru Impreza, the (discontinued) Custom Fit Kit WB-K473 you referenced is for various years and models of GM pickups and there isn't a Whispbar roof rack currently in production that fits your vehicle. If you like the higher quality of a Whispbar product then you'll want to go with a Yakima roof rack as they actually manufacture the Whispbar brand. From what you were looking at I'm guessing you have a Sedan that isn't the WRX. For this you'll...
view full answer... - Availability of Yakima Landing Pad 22We do indeed offer the Yakima Landing Pad 22 as part # Y00248
view full answer... - Recommended Roof Rack and Kayak Carrier for 2019 Subaru Impreza Sedan with Naked RoofFor your 2019 Subaru Impreza Sedan with a naked roof I recommend going with the Yakima JetStream System that consists of 50 inch JetStream Crossbars in Black # Y00425, the SkyLine Towers # Y53TR, and the Landing Pad Kit # Y00248. I like this particular system because the longer 50 inch bars will give you some extra space in case you ever want to mount another accessory alongside your kayak (or just a second kayak) and their aerodynamic design will create an extremely quiet ride during...
view full answer... - Roof Rack Bike Carrying Recommendation for 2019 Subaru ForesterFor a roof rack, what you'll need will depend on what's currently on your roof. If you have the rails along the edges or the roof running from front to back, your crossbars would attach directly to those. Rhino Rack offers a crossbar system that would have much higher quality than the entry level stuff, at a more reasonable cost than the more well-known names like Yakima or Thule. To construct this rack, you'd need the # RRVA126B-2 crossbars and the # RRSX100 feet. If your Forester doesn't...
view full answer... - What is the Maximum Width Crossbar I Can Use on My 2019 Subaru Forester?As far as crossbar width, there is no set maximum that is set by manufacturers. It truly depends on the models of crossbars they offer for your 2019 Subaru Forester. Accessories that you mount on your crossbars will have different compatibilities based on the width of the crossbars you choose. If you have an accessory in mind, I would be happy to assist with crossbar compatibility. If you are curious about crossbar length, our fitguide provides compatible lengths of crossbars for your...
view full answer... - Solution for Carrying 2 e Bikes on 2021 Kia SoulUnfortunately, none of our hitch manufacturers offer a 2 inch receiver hitch for the 2021 Kia Soul. We do offer a solution for you, though. You'd first install the Curt Class I hitch, part # C67FR. Then, you'd add a class I compatible e-bike rack. The Thule EasyFold, part # TH903202 is not an inexpensive alternative, but it is the only rack we offer that can carry heavier e bikes we offer that's compatible with a class I hitch. On the upside, the EasyFold offers some excellent features...
view full answer... - What Size Screw is Required for 2012 Mazda CX-9 Roof Rack?If you are looking for the screw size for the factory mount locations, you will use M6 screws that are 35 mm long which come in the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Fixed Mounting Points # DK289. For a roof rack, I recommend this fit kit along with the Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 and the 2500 Series Legs # RRRLKVA. Since you asked from a Yakima bar, the Yakima fit kit uses M6x28mm, M6x33mm and M6x40mm hardware as well as M8x35mm. These...
view full answer... - Recommended Roof Rack for a 2024 Subaru WRXTo add a roof rack to your 2024 Subaru WRX, I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 for Black or item # Y00428 for Silver SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 item # Y53TR Landing Pad 22 for Yakima SkyLine and Control Towers - Qty 4 item # Y00248 This aero bar roof rack system has a 165 lbs capacity. I recommend adding...
view full answer... - Is There A Way To Install a Hitch Bike Rack On a 2020 Kia Soul GT TurboThe best option to carry a bike(s) on a 2020 Kia Soul GT Turbo is with a roof rack and roof mounted bike rack. The reason for this is because there is not a trailer hitch available due to the design of the rear exhaust. I can't be certain but if I had to guess I would say there is not going to be a hitch for the GT Turbo model because there is just nowhere to put the receiver tube. For a roof rack, the best option is the Yakima JetStream Crossbar part # Y00425, part # Y53TR, and part...
view full answer... - Best Roof Rack Crossbars for 2014 Subaru Forester to use Thule HullavatorThe best roof rack crossbars for your 2014 Subaru Forester to use with the Thule Hullavator Pro Kayak Carrier and Lift Assist # TH898 are going to be from Yakima, because they are 50 inch bars - longer than other options - which are going to give you the needed space to use the Hullavator. You did not mention if you have a naked roof with no rails or raised side rails on your 2014 Subaru Forester so I will give you the parts needed for both. Raised Side Rails: - Yakima JetStream Crossbars...
view full answer...
- Yakima Roof Rack Components Needed For A 2015 Kia SoulIdk exactly how you got to that specific page but it's only including the Yakima JetStream crossbars # Y00425 and Landing Pads for Yakima SkyLine and Control Towers # Y00233 and does not include the towers needed. For a 2015 Kia Soul with a naked roof you would need the following components: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425 SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR Landing Pad 22...
view full answer...
- Recommended Roof Rack System For 2015 Mazda 3 For a Roof Top TentI would be happy to recommend a roof rack for your 2014 Mazda 3 5 Door Hatchback for carrying a 165lb Roofnest Rooftop Tent. If your Mazda 3 has fixed mounting points on the roof I recommend the Yakima Roof Rack System which uses 50" Yakima JetStream Crossbars # Y00425, SkyLine Towers for Yakima Crossbars # Y53TR, and Landing Pads # Y00248. If your Mazda 3 does NOT have fixed mounting points then I recommend the Yakima Roof Rack System which uses 60" Yakima JetStream Crossbars - Aluminum...
view full answer... - What Roof Rack will Work with a Thule Hullavator on a 2015 Mazda 3 Hatchback?For a roof rack system for your 2015 Mazda 3 Hatchback with fixed mounting points, I recommend the following setup: - Yakima JetStream Crossbars - Aluminum - Black- 50" Long - Qty 2 # Y00425 - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR - Landing Pad 22 for Yakima SkyLine and Control Towers - Qty 4 # Y00248 - (Optional for extra security) Yakima Same-Key Lock System # Y07204 While the Thule Hullavator # TH898 will have no...
view full answer...
- Best Roof Rack for a 2019 Subaru Forester With Naked Roof and Fixed Mounting PointsFor a roof rack that will attach to the fixed mounting points you have on your 2019 Subaru Forester I recommend using the Yakima JetStream Crossbar System which is composed of part # Y00425, part # Y53TR, and part # Y00248. This system is one of my favorite roof racks because the crossbars have an aero shape so they will reduce wind noise and retain greater fuel efficiency than other styles. They also have built-in channels for use with channel mounted accessories and you don't have to...
view full answer... - Best Roof Rack for a 2019 Subaru Forester With Raised Side RailsCorrect, the recommended Thule WingBar Evo Crossbars for your 2019 Subaru Forester are part # TH711220 which measure 47" long. If you wanted to go up to the next size then you could do so and for that you would need the Thule WingBar Evo Crossbars part # TH711420 which are 53" long. It is almost always permissible to go up one size but if you were to jump two sizes then that could create issues due to the channel on the crossbar that the mounting feet attach to. The crossbars also cannot...
view full answer... - Will the Thule Motion XT L # TH629706 Keep My Cargo Dry?While the Thule Motion XT L Rooftop Cargo Box - 16 cu ft # TH629706 provides a lot of coverage from rain and other elements, it is not rated as water-tight. Where the top and bottom halves meet, the edges are rolled a full 180 degrees. Water would have to come straight up from the bottom and turn 180 degrees to get inside. If you are concerned about water infiltration, we always recommend our neighbors in rainy areas throw their luggage or cargo in a plastic bag so if any moisture does...
view full answer... - Recommended Roof Rack for a 2024 Subaru Legacy w/ No Roof Rails I would be happy to! To install a roof rack on your 2024 Subaru Legacy you will need the following parts: Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 in Black or item # Y00428 in Silver SkyLine Towers for Yakima Crossbars - Fixed Mounting Points - Qty 4 item # Y53TR Landing Pad 22 for Yakima SkyLine and Control Towers - Qty 4 item # Y00248
view full answer... - Recommended Roof Rack to Use the Thule Hullavator Pro on a 2018 Subaru ForesterThe best roof rack to for you to install on your 2018 Subaru Forester so that you can use the Thule Hullavator Pro # TH898 is the Yakima JetStream roof rack. If you have a naked roof then you would need the JetStream Bars # Y00425 along with the SkyLine Towers # Y53TR and the Landing Pad 22 # Y00248. If you have the raised rails then you just need either of the crossbars mentioned above along with just the TimberLine Towers # Y33TR. To deter theft of your roof rack system you can also...
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.