Custom Fit Roof Rack Kit With Y00429 | Y06111 | Y06143 | Y28TR
(109 reviews)
Price: $688.80
In Stock
Custom Fit Roof Rack Kit With Y00429 | Y06111 | Y06143 | Y28TR
Item # Y39EB
Our Price: $688.80
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (109)
- Q & A (0)
- Videos (60)
- Photos
Yakima Roof Rack - Y39EB
- Aero Bars
- Crossbars
- 60 Inch Bar Space
- Yakima
- Silver
- Overhang
- 2 Bars
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Yakima 60" JetStream MD - Silver:- Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers and a fit kit to create a complete roof rack
- Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
- Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
- Aero-style bars reduce drag to help maintain fuel efficiency
- Full-length design maximizes space for carriers and accessories
- Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
- Works with most universal-mount bike, water, snow, and cargo carriers
- Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
- Simply push down on the SmartFill strips to slide in accessories - no trimming required
- Bottom channels allow for easy installation on Yakima towers
- Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
- Etched measurements on bottoms of bars help center rack on your roof
- Lightweight aluminum bars are durable and rustproof
- Internal JetTruss extrusions provide exceptional bar strength
- Clear anodized alloy finish is corrosion resistant
Yakima BaseClip 111:
- Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
- Padded, stainless steel clips provide secure grip on your door jambs
- Snap onto DropHooks inside towers
- Protect door jambs from scratches and abrasions
- Powder coated for durability and rust resistance
- Molded rubber pads fit the contours of your roof
- Clip onto bottoms of towers
- Protect roof from scratches and abrasions
Yakima BaseClip 143:
- Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
- Padded, stainless steel clips provide secure grip on your door jambs
- Snap onto DropHooks inside towers
- Protect door jambs from scratches and abrasions
- Powder coated for durability and rust resistance
- Molded rubber pads fit the contours of your roof
- Clip onto bottoms of towers
- Protect roof from scratches and abrasions
Yakima BaseLine Towers (4-pack) (w/new covers):
- 4 Heavy-duty towers mount Yakima crossbars to your vehicle with a naked roof
- Pair with 2 Yakima crossbars and BaseClips to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Pivoting bases can be adjusted during installation to ensure towers are seated correctly
- Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
- Also fit RoundBar crossbars with adapter
- Safe and easy installation with DropHook system and included torque tool
- DropHook clip holder adjusts on 3 axes for perfect fit on your naked roof
- BaseClips attach to hooks in tower assemblies and tighten for a secure grip
- Torque tool clicks 3 times when clips are secure - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Weather-resistant stainless steel, glass-reinforced plastic, and elastomer construction with matte finish
8000429 Yakima Jet Stream Cross Bars - Aluminum - 60" Long - Qty 2 - Silver
8006111 Custom Base Clips and Pads for Yakima Base Line Towers
8006143 Custom Base Clips and Pads for Yakima Base Line Towers
8000162 Yakima Base Line Towers for CoreBar, JetStream, and RoundBar Cross Bars - Bare Roofs - Qty 4
Replaces 8000146
Video of Custom Fit Roof Rack Kit With Y00429 | Y06111 | Y06143 | Y28TR
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima BaseLine Roof Rack Towers BaseClip Fit Kit Review
Hi, everyone, Aidan here with etrailer. Today, we're gonna be taking a look at the Yakima BaseClip Fit Kit for your Yakima BaseLine FX Roof Rack Kits. Now, this is gonna be the rubber pad and the clamps that actually hold the whole roof rack system in place and make it a custom fit for your various different vehicles. Now, that being said, there's tons of different kits out there on our website for different vehicles, all of those pads are gonna be molded somewhat differently to adapt to different roof shapes, so do plug in your vehicle information into our fit guide and find the right fit kit for you and your vehicle, but it's gonna be a look at the overall system, how it works, and how it functions with the roof rack. So the main two parts of this are gonna be the rubber pad and the clamp, but let's talk about that rubber pad first. It's gonna be custom molded to your vehicle, so you can see really well right here on this lip, it forms around that ridge on the roof and fits snugly into place there to make sure that nothing is moving around and it's fit custom to that area.
Now, the base of that fit kit is what actually clips into the tower here and serves as the connection point between the crossbar roof rack system and your vehicle. That rubber base to it is going to give you the maximum protection and make sure that you're not scratching or scuffing any paint on your roof, and it keeps things nice and sealed up. Now, the stainless steel clip is what also helps to secure it to our roof, that's gonna be the second main component. It's a stainless steel construction and a black powder coat finish, the finish helps it match the whole roof rack system, but it all helps it resists rust and corrosion. Now, the inside of those clips are gonna have a rubber padding, again, so there's no metal on metal contact with our paint or anything, and then you can see here, it's custom fit, hooking inside our door jam, and whenever I close the door, it'll just fit right around there, making sure that it's a nice custom fit.
It attaches up inside the tower right up through here, and it just tightens down, hooking into a slotted opening hole, and then that's what gets it all secured and what helps it join into the tower system. These fit kits come in pairs, one for the passenger's side and one for the driver's side. Now, the reason they do that is because depending on your vehicle, you're probably gonna have a different fit kit for the front and rear. Yakima does a lot of research and development into making sure it's a custom fit for the vehicle, and the one we have it on here today, the Honda Civic, is a perfect example. You can even visually see how much longer the clamp at the back is compared to this clamp up at the front.
So clearly, we're gonna need a different kit for the front end, because there's just less distance for that clamp to travel. So again, plug in your vehicle information to our fit guide, make sure you find the right kits for you, and make sure that you also have the right set for the front and rear. But that's really all there is to it. The BaseClip system is gonna work really well in tandem with that BaseLine roof rack system, and it's really just coming down to making sure you get the right fit for your vehicle, because without that fit kit, you don't have a roof rack. But that'll do it for our look at these BaseClip Fit Kits for your Yakima BaseLine Roof Rack Systems.
Thanks for watching.
Customer Reviews
Custom Fit Roof Rack Kit With Y00429 | Y06111 | Y06143 | Y28TR - Y39EB
Average Customer Rating: 4.7 out of 5 stars (109 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.by: TimN03/19/2024
Chevrolet Silverado
Excellent solution for my 2023 Chevy Silverado. In the past, I have had rails installed on the roof of my pickup trucks, but I find the BaseLine towers to be a better solution, since they don't permanently change the truck. Plus, they are much more solid than SkyLine system on the rails.
by: Todd06/24/2023
Really easy to install & work as specified. So happy with the customer support/service at etrailer.
by: Hurtlocker08/12/2023
Strong, Solid Bars, Super Light, and really easy to install!
by: 04/01/2024
Follow the instructions, and you can't go wrong on the self installation
by: Dave02/11/2024
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!
by: Paul08/16/2023
Ackage came 2 days early the install was somewhat easy (did it by myself)
Did not get to mount anything to it but seems really sturdy. One thing I can say is mark out your mounting points with provided stickers then put up and make adjustments to the roof rack.
by: Debra09/10/2023
The rack has been so useful since I purchased it. Staff at etrailer.com were exceptionally helpful in getting the best option for my car and answering questions. I recommend this company, for its 110% customer service, excellent prices and timely delivery.
by: Roland01/08/2024
Well packaged and on time
by: Richard R02/20/2023
GMC Canyon
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid.
by: John 09/06/2023
Your notice of schemes was a lot better than the yakima site provided. They did not suggest the scheme you did.
But when the products arrived, the instructions were by yakima. Generally worked as instructed except the tower to tower transverse mounting dimensions needed to be tweaked for a perfect fit.
by: Richard06/28/2017
Honda
etrailer installation videos were very helpful in selecting the product and first installation, although in practice, minor adjustments to method were required. Now after more than a dozen set ups, mounting the crossbars takes 15 minutes, and taking them off, 10. The system is well made, and when mounted, precise, strong, and reliable. Expensive perhaps compared to alternatives, but well worth the money. Used to carry a 50# sailboard 40 miles to the beach on weekends. ('11 Honda Fit)
One minor shortcoming: rubber sheet glued to base clips where they touch the car body have torn and moved sideways 1/16", but expect will be easily replaced with readily available 1/16" sheet rubber (e.g., shower pan liner) when the time comes.
Used in rain at least once, (sustained 60mph), with no leaks.
by: Moparnut22808/20/2023
Great product fast shipping
by: Andrew08/01/2023
Great! Easy to install!
by: Ian 07/02/2023
Mazda
Solid build quality and easy installation on my '21 Mazda CX-5.
by: Steve K.04/23/2019
Easy to install thanks to the etrailer video. I have used the rack system on many long distance trips including driving from South Carolina to Yellowstone.
by: Greg 06/07/2023
Nicole was beyond helpful!!!
by: Troy01/22/2022
Easy to install and sturdy. I carry a 9' pontoon boat on my camper shell using this rack at freeway speeds with no problems.
by: Richard 04/06/2023
Happy with the purchase. Crossbars shipped and received quickly.
by: Sara03/19/2019
Yakima is always great, the bars are just right for my kayaks and look great too.
by: Leslie 02/10/2023
Roof rack parts were ordered correctly and shipped quickly.
by: Orlando12/05/2022
Hi, the company, good profesinal service. The product, all I pay was there. Very easy to install. Thanks Bless
by: Rebecca 12/31/2022
Great fit, feels really sturdy, excellent directions
by: Kevin M.08/29/2020
Work exactly as they should and hold everything securely to my vehicle without interfering with the car’s normal operation. etrailer had best prices based on my research. These bars are much quieter than traditional round bars and worth the added expense.
by: Erica05/18/2017
Amazing product! Use this for my kayak and canoe. After a year they are still in great condition and very sturdy. The site is very helpful and informative. Highly recommend this product.
by: Brian10/29/2022
Great product, well built and easy to i nstall.
25
779
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- What Roof Rack Do You Recommend for a 2007 Honda Element SC?Absolutely! For a great roof rack system that will fit your SC version of the 2007 Honda Element, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum - Silver - 60" Long - Qty 2 # Y00429 - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR - Landing Pad 9 for Yakima SkyLine and Control Towers - Qty 4 # Y00229 - (Optional for extra security) Yakima Same Key System (SKS) Lock Cores (QTY 2) # Y07202 With the above...
view full answer... - Recommended Roof Rack for a 2024 Nissan Pathfinder w/ Raised Rails I would be happy to! To add a Yakima roof rack to your 2024 Nissan Pathfinder you will need the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 item # Y33TR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft. A great perk of Yakima's products is you can...
view full answer... - Recommended Roof Rack for a 2024 Acura RDX w/ a Naked Roof Congrats on the new SUV! Yes, we do have a way to attach a roof rack to your 2024 Acura RDX even though you do not have roof rails. It is the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06174 BaseClip Fit Kit for Yakima BaseLine...
view full answer... - Recommended Roof Rack for a 2024 Acura MDX w/ No Roof Rails Yes, we do! To add a roof rack to your 2024 Acura MDX with a naked roof you will need the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06163 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06178 This aero bar roof rack system has a 165 lbs capacity....
view full answer... - Yakima Jetstream Roof Rack that Fits 2024 Ford Escape with Naked RoofYes, we do have a Yakima Jetstream roof rack that fits your 2024 Ford Escape with the part numbers # Y00429, # Y28TR, # Y06137, # Y06152. We recently installed all of the roof racks we offer and everyone agreed the Jetstream was the nicest and easiest to install.
view full answer... - Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
view full answer... - Recommended Roof Rack for a 2023 GMC Yukon XLTo add a roof rack to your 2023 GMC Yukon XL, you will want the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 Black or item # Y00429 in Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UV I have attached a couple of pictures below that will show you what this roof rack looks like and how to...
view full answer...
- Roof Cross Bars That Fit A 2015 Chevrolet Silverado 1500 With An A.R.E MX Bed CapTo install a roof rack on your A.R.E MX Bed Cap on your 2015 Chevrolet Silverado 1500, you're going to need to install a set of tracks like: -Yakima Tracks for Roof Racks # Y01126 for 42" long tracks, -Yakima Tracks for Roof Racks # Y01127 for 54" long tracks, or, -Yakima Tracks for Roof Racks # Y01135 for 60" long tracks. From here you'll need an actual set of crossbars like the: -Yakima JetStream Crossbars # Y00429, with the BaseLine Towers for Yakima Crossbars # Y28TR, and the Landing...
view full answer... - Roof Rack Recommendation for 2021 Toyota Highlander with Naked RoofHey Ronnie, I attached a link to this page that shows all of the roof racks that are a fit for your 2021 Toyota Highlander with a naked roof but my favorite option is the Yakima Jetstream part # Y00429, # Y28TR, # Y06153, # Y06132 as we had chance to install all of the racks we carry and we all agreed the Yakima racks are the nicest and the easiest to use. This is a through bar design which means the bars are longer than the feet of the rack which is great for if you need max bar space. If...
view full answer... - Yakima Roof Rack for 2018 Honda Odyssey that Can Fit Thule Hullaport XTThe Yakima HD bar is too thick for the Thule Hullaport XT part # TH849000 to attach to so for your 2018 Honda Odyssey you'd be better off with the JetStream roof rack part numbers # Y00429 and # Y33TR.
view full answer... - Roof Rack For A 2017 VW Golf Sportwagen To Use With The Thule HullavatorWe can definitely set you up with a roof rack for your 2017 Volkswagen Golf Sportwagen that is compatible with the Thule Hullavator # TH898. The Hullavator requires the crossbar to overhang past the tower by 4" to 8", so it will be best to use a solid aero bar setup with a slightly longer crossbar. For that I recommend the Yakima Jetstream roof rack. This will consist of the following parts: Yakima TimberLine Towers for Yakima Crossbars # Y33TR Yakima JetStream Crossbars - Aluminum - Silver...
view full answer... - Best Roof Rack For 2024 Kia EV9 With Raised Side RailsThe best roof rack for your 2024 Kia EV9 with raised side rails is from Yakima, and consists of the following part numbers: - Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426 - TimberLine Towers for Yakima Crossbars # Y33TR I really like the Yakima brand due to how quiet the bars are; they have what are called "WindRidges" on top that control the flow of the air both over and under the bar, which minimizes both vibration of the bar and wind noise. It is also highly durable,...
view full answer... - Square Bar Roof Rack that Fits 2020 Ram 1500 Quad CabThule offers a square bar roof rack that fits your 2020 Ram 1500 quad cab with the part # TH712500, # TH710501, and # TH145199. Then for a square bar roof rack the Thule Portage part # TH819 would work great.
view full answer... - Yakima Crossbar Length For 2022 Lexus GX 460 & HullavatorI checked with Yakima regarding the crossbar length, and they do say 50, which is odd for your 49 inch rails. With that distance between your rails, don't use the 50 inch bars, use the 60 inch long JetStream bars, either Silver # Y00429 or Black # Y00426. The rest of the parts for the Yakima rack on your 2022 Lexus GX 460 remain the same; Towers # Y53TR, Landing Pad 30 # Y25ZR and Lock Cores # Y07204.
view full answer... - How to Determine Correct Roof Rack For 2024 Kia TellurideI'm going to go ahead and respectfully disagree that we're idiots, Paul. I'm confident we can figure out the combination for a roof rack on your 2024 Kia Telluride, and there are three possible options Kia has for your roof - flush-mounted rails, raised side rails, and a bare roof. I made some diagrams below showing test fits on a Kia Telluride with photos from the nice folks at Yakima so you can see the difference (please note these are just test fit photos, and not exactly how the rack...
view full answer...
- Roof Rack for Thule Canyon XT Roof Cargo Basket on 2020 Subaru AscentYour 2020 Subaru Ascent will require a roof rack to carry any cargo basket, including the Thule Canyon XT Roof Cargo Basket # TH859XT. Assuming you have raised side rails that run front to back on your Ascent, here is the roof rack that will work with your Subaru: - Yakima JetStream Crossbars # Y00429 (Silver) or # Y00426 (Black) - TimberLine Towers for Yakima Crossbars # Y33TR As for the paddleboards, there isn't anything designed to carry them in a cargo basket so you can use whatever...
view full answer... - Rooftop Cargo Carrier Recommendation for 2020 Toyota Highlander with Panoramic RoofFor a great option for your 2020 Toyota Highlander with panoramic bare roof, I recommend the Thule Force XT XXL # TH6359B. This box has the largest internal dimensions out of all of our cargo boxes. It also comes with a dual-opening lid that can be accessed from either side of your vehicle. I confirmed that your trunk can fully open with this box mounted on your roof. If you already have crossbars, I recommend measuring your bars to make sure they do not exceed 3-1/2" wide x 1-11/16"...
view full answer... - Yakima Roof Rack that Fits 2019 Honda Passport with Raised RailsSince your 2019 Honda Passport has raised rails the roof rack feet that fit it are the ones that wrap around the bars whereas the flush bar roof styles are the ones that have options that attach directly to it. So for a Yakima there is the Jetstream part number # Y00429 and # Y33TR which is an aero shaped bar setup that wraps around your raised rails. This is a very solid setup that will work great and is no less reliable than any other option.
view full answer... - Roof Rack For 2015 Toyota Highlander For Naked RoofThe video you referenced is for a 2015 Toyota Highlander with flush mounted rails; I checked directly with Thule and they do not have a roof rack fit for a naked roof on a '15 Highlander, just one with those flush mounted rails. So if you want a rack, you'd need a new set up. For that I would go with Yakima, as it is the that is the most similar in quality to a Thule rack. The parts that make up a Yakima roof rack for your 2015 Toyota Highlander are the following: - Yakima JetStream...
view full answer... - Recommended Roof Rack System For 2021 Kia Telluride LX with Naked RoofThe only company at the moment (June 2023) that makes a roof rack system for your 2021 Kia Telluride LX with a naked roof is Yakima, so for a roof rack system you'll need the following components: Crossbars # Y00429 Feet # Y28TR Fit Kits # Y06125 and # Y06165 I'd also recommend adding the locks # Y07204 to secure the roof rack to your roof to deter theft. Out of all of the crossbar options for your vehicle this is by far the best due to the Aero design to cut down on wind noise the most,...
view full answer... - Does Thule Force XT XL Rooftop Cargo Box Fit Yakima Roof Rack on 2023 Acura MDXYes, the Thule Force XT XL # TH6358B will fit very easily on the Yakima roof rack for your 2023 Acura MDX. There won't be any issues with the fit of your cargo box on this rack it will fit perfectly so you can continue to use it. The only thing you need to do is pick the right Yakima rack for your '23 MDX, depending on if it has a bare roof or flush-mounted rails. Bare Roof - Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426 - BaseLine Towers # Y28TR - BaseClip Fit Kit # Y06163...
view full answer... - Whats The Longest Roof Rack Available For 2023 Toyota Highlander For Thule HullavatorThe longest crossbar that'll work with the flush roof rails on your new 2023 Toyota Highlander Hybrid Platinum is 50" and is the Yakima roof rack system which uses the following parts: Crossbars # Y00429 Towers # Y53TR Landing Pad # Y66VR This will be long enough to use both but as each one weighs over 40lbs, plus the roof rack weighs about 15lbs you'd be overloading your roof with two kayaks and two hullavators as your roof only has a 165lb capacity per Toyota.
view full answer... - Recommended Roof Rack For A 2023 Toyota RAV4 With A Thule Hullavator Hi Cathy, To ensure that you can get the extra extension to mount the Thule Hullavator # TH898 you'll want to go with a Yakima roof rack system. Yakima crossbars run their mounting track the entire length of the crossbar so you can go with ones that are longer than your typical length without worrying if the mounting feet will be able to connect. You'll want the following components: Yakima JetStream Crossbars - Black - 60" Long # Y00426 or silver # Y00429 SkyLine Towers for Yakima Crossbars...
view full answer... - Will Rhino-Rack Crossbars Fit On Yakima BaseLine Towers? The top channel on most crossbars like the Rhino-Rack and Yakima are similar but you should never mix and match towers and crossbars between different manufacturers. Their components are designed to work specifically with each other and your Yakima towers may not work properly with the Rhino-Rack crossbars. Instead you will want to stay with the Yakima crossbars from the list below to ensure they fit together properly and you have a manufacturer who will stand behind the warranty for the...
view full answer... - Can Longer Yakima Crossbars be Used on 2023 Honda HR-V For Thule HullavatorYou can definitely use longer Yakima crossbars on your 2023 Honda HR-V for the Thule Hullavator Pro # TH898, but don't go all the way to the 70 inch # Y00427, as these are 20 inches longer than the recommended # Y00425 and will stick out way too much on your HR-V. So instead use the 60 inch Yakima JetStream Crossbars # Y00426. Then to complete the rack set up on your '23 HR-V you do have the right parts with the BaseLine Towers # Y28TR, and Fit Kits # Y06159 & # Y06181. In regards to...
view full answer... - Recommended Roof Rack Crossbars and Kayak Carrier for a 2022 Nissan Rogue SportFor your 2022 Nissan Rogue Sport with a naked roof, I'd recommend going with the Yakima JetStream Crossbars # Y00425 with the BaseLine Towers for Yakima Crossbars # Y28TR, and the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06123 & # Y06170. These crossbars will attach to your vehicle's naked roof and provide you a mounting point for a kayak carrier like the Yakima JayLow Kayak Roof Rack w/ Tie-Downs # Y04073. The crossbars # Y28TR measure 50" long x 2-3/4" wide, 1-1/8" tall...
view full answer... - Are Two Different BaseClip's Needed for a Yakima Roof Rack on a 2023 Maxda CX-5 with Naked RoofYes, the two different BaseClip's are correct for your 2023 Mazda CX-5 with naked roof. The BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06130 is for the front bar and the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06154 are for the rear bar. The rest of the roof rack kit is the: - Yakima HD Crossbars # Y01156 - BaseLine Towers for Yakima Crossbars # Y28TR - HD Bar SL Adapter for Yakima BaseLine # Y03541 This will allow you to use the Thule Hullavator Pro Kayak...
view full answer... - Compatibility of 3 Bike Rack on 2015 Toyota PriusThe Reese Q-Slot Platform-Style 2 Bike Rack is a fit for your 2015 Prius but has been discontinued. If you already have the rack it will work very well for you. I recommend using the included pin and clip for a secure fit in the hitch and then using a cable lock like # e98891 to secure your bikes to the rack. The 2 inch receiver only Reese Q-Slot Platform-Style 2 Bike and 4 Bike Rack PS63138 (also discontinued) was a 2 or 4 bike carrier, but would NOT work on your 2015 Toyota Prius...
view full answer... - Best Way to Carry Cargo on the Roof of a 2005 Scion tCThe best option would be a cargo box installed on an aftermarket roof rack on your 2005 Scion tC. For a cargo box I would recommend the SportRack Vista XL Cargo Box part # SR7018. For a more economical option you could go with a Rightline Sport Jr. Rooftop Cargo Bag # RL100S50, this bag does not require the installation of a roof rack. I also recommend a protective pad, # RL100650, to protect the roof when using the bag. This would be great if you only occasionally plan to carry cargo...
view full answer... - Rear Yakima Roof Rack Bar Sits Higher than Front Bar on a 2016 Toyota AvalonYou will want the Yakima roof rack on your 2016 Toyota Avalon as level as possible, but due to the different strength points on a roof and the differing heights of the towers it isn't uncommon for crossbars to be a little out of level with each other. They shouldn't be so far out of level that is causes issues with accessories fitting though, which is the main concern. With all of that being said, it is always a good idea to double check your installation just to make sure you have everything...
view full answer... - Roof Rack for a 2017 Ford Edge Titanium With Glass RoofYou can actually obtain a roof rack for a 2017 Ford Edge Titanium. According to my resarch the only real issues you may have are reduced capacity of 100 pounds and not being able to operate the opening or closing mechanism of the roof while the rack is installed. Your 100 pound capacity will include the weight of the rack, the weight of any accessories and any cargo loaded onto the vehicle. I would still exercise caution when loading accessories onto the roof rack, as there still is...
view full answer... - Recommended Roof Rack for a 2020 Kia Sportage w/out Roof RailsYes, we do have options to add a roof rack to your 2020 Kia Sportage without roof rails. I recommend the Kia Sportage Roof Rack by Yakima. You will need the following parts: Yakima HD Crossbars 500 lbs Capacity Aluminum - Black - 55" Long - Qty 2 item # Y01156 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 item # Y03541 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers...
view full answer... - Does Yakima Jetsream Roof Rack Fit 2020 Chevy Silverado 1500 Crew Cab New BodyYes the Yakima Jetstream roof rack part numbers # Y00426, # Y28TR, and # Y06110 is a confirmed fit for your 2020 Chevy Silverado 1500 crew cab new body style!
view full answer... - Thule Kayak Carrier Recommendation for T-Slot Mount on Yakima JetStream Crossbars on 2022 HighlanderIt truly depends on what Thule kayak carrier you wish to use on the Yakima JetStream Crossbars. For example, the Thule DockGlide # TH896 is compatible with the top slots of the JetStream crossbars without any additional nuts. I definitely recommend the DockGlide because it is a saddle-mount style that is much easier to load than the awkward positioning of j-style carriers. In order to have a full JetStream setup of a roof rack on your 2022 Toyota Highlander, it depends on what roof type...
view full answer... - How does Thule Fit Kit Attach to a 2019 Jeep Grand Cherokee with Flush RailsSometimes, neighbors get confused about the fitguide selections about whether they have solid matte black flush rails, matte black and gloss black flush rails, or black and chrome flush rails on their 2019 Jeep Grand Cherokee. The Thule setup that uses Fit Kit for Thule Podium-Style Roof Rack Feet - 3142 # THKIT3142 are designed only to fit the black/chrome flush rails and the matte black/gloss black flush rails. If you solid matte black flush rails, this fit kit will not your Grand Cherokee,...
view full answer... - Recommended Roof Rack with Longer Crossbars on 2015 Honda CR-V with Naked RoofThe Rhino Rack Vortex Roof Rack System that you referenced is an excellent option for your 2015 Honda CR-V with a naked roof. This system consists of # RRVA137B-2 for the two 54 inch Vortex Aero Crossbars, # RRRLKVA for the 2500 Series Legs, and # DK284 for the DK Fit Kit. Rhino-Rack does indeed have larger Vortex Aero Bars available that will fit the 2500 Series Legs, such as the 59 inch # RRVA150B-2 that you mentioned. The issue though is that these crossbars feature a limited channel...
view full answer... - Instructions for Yakima JetStream Roof Rack on 2019 Honda AccordAbsolutely! I have attached the detailed written installation instructions for the Yakima JetStream Roof Rack system that is confirmed to fit your 2019 Honda Accord. This system consists of # Y00425 for the Black 50 Inch JetStream Crossbars, # Y28TR for the BaseLine Towers, # Y06123 for the Front Fit Kit, and # Y06159 for the Rear Fit Kit. This system will use a clamp-style attachment to secure the feet to the roof of your Accord. I have attached an installation video for this system...
view full answer...
- Compatibility of Thule Crossbars and Yakima and Inno Bases for a 2017 Chevy VoltYakima and Inno bases are not compatible with the Thule roof bars. In general, each manufacturer has its own mounting methodology and kits, so the bars are not usually compatible. Your roof box, however, would be likely to fit onto the available bars. If you can send me a little more information about it I can track down better fit information. I personally prefer Yakima racks as they are extremely adaptable and can angle to precisely fit the roof better than other brands. For your...
view full answer... - Recommended Feet And Fit Kit For Installing 53 Thule AeroBlade Crossbars On 2012 Honda CivicI would be happy to recommend the correct feet and fit kit required to install your 53" Thule AeroBlade Crossbars on your 2012 Honda Civic. If you Civic is a sedan you will need the Evo Clamp Feet for Thule Crossbars # TH710501 and Fit Kit # TH145180. If your Civic is a coupe there is not an option for mounting any Thule crossbars so you will need to replace them. I recommend going with the Yakima Roof Rack System which uses Crossbars # Y00426, Crossbar Feet # Y28TR, Fit Kit # Y06125,...
view full answer... - Roof Rack for Roof Tent on a 2019 Ford F-450 Super Duty Crew CabWhile there are no roof racks that have a weight capacity of 400 lbs, I still believe we have a solution for your 2019 Ford F-450 Super Duty Crew Cab with the Yakima HD roof rack. This consists of the HD Crossbars # Y01157, BaseLine Towers # Y28TR, HD Bar SL Adapter # Y03541, and Fit Kit # Y06185. If you are looking to use a tent that has a 400 lb weight capacity like the Yakima SkyRise HD # Y07436 then you actually just need to make sure that the roof rack is rated for 165 lbs like the...
view full answer... - Can I Purchase a Half System of the 66 Yakima Round Crossbars?Yes, we do carry a option for a single Yakima Round Crossbar - 66" # Y8810025 for your 2020 Ford F-250 Super Duty (Super Cab). In addition to the crossbar, you will need two of the Replacement BaseLine Tower for Yakima Crossbars # 8880618, the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06185, and two of the Replacement RoundBar SL Adapter for Yakima StreamLine Towers - Qty 1 # 8880641. With that being said, in order to transport a kayak or a canoe on the top of your...
view full answer... - Does Yakima Jetstream Roof Rack Fit 2018 Ford Fiesta HatchbackYes, we have confirmed with Yakima that the Jetstream roof rack part numbers # Y00425, # Y28TR, and # Y06148 is a confirmed fit for your 2018 Ford Fiesta Hatchback. I attached a picture of the rack installed on a similar Fiesta as yours for you to check out as well.
view full answer...
- Best Roof Rack and Tire Chain for 2020 Honda ClarityThe five roof racks that we have for your 2020 Honda Clarity are all Yakima systems with the main difference just being the types of crossbars that come with it. Of the five, the Yakima Jetstream Roof Rack kit is my favorite. That has part numbers # Y00425, # Y28TR, # Y06117. The roof rack itself is pretty easy to install. The trickiest part may be the custom fit clips # Y06117 and the towers # Y28TR if you're not used to them. I attached a video of the install process that uses a similar...
view full answer... - Recommended Low Profile Roof Rack for 2019 Jeep Grand CherokeeFor a low profile roof rack for your 2019 Jeep Grand Cherokee the best fit will be determined by the rails or lack of rails on your vehicle. If you have the naked roof with no side rails, the Yakima JetStream Crossbars - 60" Long # Y00426, BaseLine Towers # Y28TR and BaseClip Fit Kit # Y06121 will be the best option. If you have black and chrome flush mounted side rails I recommend the Thule WingBar Edge system which includes the Crossbars # TH89FE, Fixpoint Feet # TH29SC, and Fit Kit...
view full answer... - Roof Rack Recommendation for a 2013 Toyota Prius cThe Rola roof rack 59729 is designed to fit the Toyota Prius V but not the Prius c. We do have roof rack options that fit the Prius c. I have included a link to the main page for you. The most economical option is Rhino-Rack roof rack made of crossbars # RRVA106B-2, feet # RRRLKVA, and custom clamp kit # DK351. As far as design is concerned the compatible rack that is closest to the Rola rack is made up of Yakima CoreBars # Y00421, with BaseLine Towers # Y28TR, front clips # Y06135,...
view full answer... - Parts Needed to Install Yakima CoreBar and BaseLine Towers on 2022 Ram 1500The parts needed to install a Yakima CoreBar roof rack on your 2022 Ram 1500 include the following: 60" CoreBar Crossbars - # Y00422 BaseLine Towers - # Y28TR Fit Kit Clips - # Y06135 (you need 2 of these) Lock Core Kit - # Y07204 (optional) Since you should already have the 60" CoreBar crossbars and BaseLine Towers for your 2020 Dodge Durango you just need 2 of the Fit Kit Clips. Since the pads for the fit kit just kind of pop in place you should be able to pull them off by hand or pry...
view full answer... - Recommended Roof Rack for 2016 Ford Edge Sport withI am happy to tell you that we do ship to APO addresses! If you let me know what rack you are interested in or what vehicle you are trying to outfit I'd be happy to help you out.
view full answer...
- Rola Sport Roof Rack for a 2012 Honda PilotI have a solution for you, but unfortunately the Rola Sport Extended Series Roof Rack 59834 is not a fit for the 2012 Honda Pilot LX with a naked roof. Instead, you'll want the Yakima Roof rack consisting of these parts: # Y01157, # Y28TR, # Y03541, # Y06183. This will provide a roof rack for your vehicle. This gives you a sleek look like the Rola Sport but also one that fits your vehicle and has a better design.
view full answer... - Do I Need A Roof Rack To Install A Curt Cargo Basket On A 2008 Honda FitThe Curt Roof Mounted Cargo Basket - 41-1/2" Long x 37" Wide x 4" Deep - 150 lbs, part # C18115, is designed to attach to a roof rack. The roof rack is not included. My recommended roof rack for your 2008 Honda Fit will consist of the following items: Round 48" CrossBars for Yakima Roof Rack System (QTY 2), part # Y00408 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4, part...
view full answer... - Kayak Carrier and Roof Rack Recommendation for 2006/2007 Mazda 3 HatchbackFor a two kayak carrier that would work great on both of your Mazda 3's you would want the Yakima BigStack part # Y04041. This will carry your two kayaks easily and comes with all of the needed straps to secure them. For both your 2007 and 2006 Mazda 3 the same Yakima roof rack will fit and work well. You would need the part numbers # Y00408, # Y28TR, # Y03536, # Y06143, and # Y06111.
view full answer... - Which Yakima Roof Rack Components are Needed for 2011 Honda FitSince you have a Q tower roof rack the fit kit you would need is the now discontinued Q99 clips. The fit kit you found on our site # Y06143 is correct but it's for the current style of Yakima roof rack that is still supported. The complete parts list needed for the 2011 Honda Fit now is # Y00408, # Y28TR, # Y03536, and # Y06143.
view full answer... - Roof Rack Kit for a 2009 Honda Fit, 2003 Toyota Camry and a 2015 Nissan SentraThough I strongly recommend buying an individual rack for each vehicle, you can build a modular Yakima kit for your three vehicles. I'm recommending Yakima because their crossbars have a full channel on the underside of the bar, letting them be fit to multiple vehicles without needing separate bars. The Toyota Camry requires the longest bar, so you'll fit this bar to the other vehicles. To do this, you'll need the following parts for all three vehicles: Yakima JetStream bar, 60 inches,...
view full answer... - Will the Inno Locker Watersport Roof Rack and Surfboard Carrier Work w/ Yakima Corebar Crossbars?Yes, they both will. The Inno Locker Watersport Roof Rack w/ Crossbar Pads item # INA446 and the Inno Board Locker Surfboard Carrier item # INA744 are both compatible with the Yakima CoreBar Crossbars item # Y00421. I have listed the parts recommended for a Yakima Corebar roof rack kit below for a 2013 Honda Civic Couple: Yakima CoreBar Crossbars - Steel - Black - 60" Long - Qty 2 item # Y00422 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit...
view full answer... - Recommendation for Carrying 4 Bikes on a 2009 BMW 535iThere may be a way for you to carry 4 bikes on your 2009 BMW 535i, however, there are only class I trailer hitches available for your vehicle. Class I trailer hitches are limited to carrying a maximum of 2 bikes on a bike rack because of the reduced tongue weight of the vehicle and hitch. The reason that only two bikes are recommended, on a hitch mounted bike rack, for Class I hitches is that the added torque applied to the hitch and vehicle frame will be too great for the setup, and...
view full answer... - Recommended Cargo Basket for a 2014 Honda Civic Si CoupeTo add a cargo basket to the roof of your Honda Civic, I recommend the Yakima LoadWarrior Roof Rack Cargo Basket item # Y07070. This basket is made of steel and is 44" long x 39" wide. It weighs 25 lbs and has a 140 lbs capacity. I have linked a review video below of this basket installed on a Honda Civic so you can get a good idea of what this set up will look like. If you do not have a roof rack on your 2014 Honda Civic Si Coupe you will want the roof rack by Yakima and it includes...
view full answer... - Carrying Bikes And Towing A Motorcycle Trailer On My 2001 Honda CivicThe Swagman Original 4 Bike Towing Rack for 2" Trailer Hitches - Tilting, part # S64675, is only made for Class III, 2" hitch receivers. Unfortunately, the smallest hitch receiver that you can use with a dual hitch adapter is Class III or 2" hitch receiver. Your receiver's tongue weight is reduced by 50% when using an adapter, that would reduce the capability of your hitch receiver, which is either Class I or Class II, to an amount that would render the adapter ineffective. I do have an...
view full answer... - Rola Roof-Rack System for a 2009 Mazda 3 with 4 doorsFor a 2009 Mazda 3 there are several roof rack options depending on how your vehicle is equipped. For a 4-Door with fixed mounting points with no existing rails or crossbars you can use the Rhino Rack roof racks which is made up of the following parts: # RRVA118B-2, # RRRLKVA, and # DK289. For a 4-Door without fixed mounting points with no existing rails or crossbars you can use the Yakima Roof Rack made up of the following parts: # Y00426, # Y28TR, # Y06143, and # Y06111.
view full answer... - Recommend Roof Rack and Roof Mounted Tandem Bike Rack for 2001 Honda AccordI do have a solution for you to carry a tandem bicycle on your 2001 Honda Accord, but the item you selected, Yakima ForkLift Roof Bike Rack # Y02098, is not designed for tandem bicycles. First, if you do not already have a roof rack on your Accord you will need to install one. If you have the 4-door model, I recommend the Yakima Roof Rack: # Y00408, # Y28TR, and # Y03536. In addition you need parts # Y06159 and # Y06143 if your Accord is the 4-door model or parts # Y06123 and # Y06170...
view full answer... - Recommended Yakima Roof Rack for 2007 Honda Accord 4 DoorFor your 2007 Honda Accord you would simply select sedan for the 4 door version. The Yakima system for your vehicle will be the Baseline roof rack. The Q-Tower and Q-Clip fit kits were discontinued a few years back. My recommendation for you consists of the following Yakima parts: JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 BaseLine Towers # Y28TR BaseClip Fit Kit (front) # Y06159 BaseClip Fit Kit (rear) # Y06143 I also recommend adding locks # Y07204
view full answer... - Replacement Parts For A Whispar Roof Rack Or Alternative For A 2012 Honda FitWhen Yakima purchased Whispbar they supported the line for a few years, but gradually gradually Yakima improved their version of the Whispbar system and slowly stopped producing Whispbar product. As a result of this, we do not have the fit kit for your 2012 Honda Fit nor do we have replacement pads. Yakima is no longer producing this rack nor are they supporting it. I do have a rack that will fit your vehicle. It will consist of the following items: Yakima JetStream Crossbars - Aluminum...
view full answer... - Roof Rack and Kayak Carrier Recommendation for 2013 Honda Civic CoupeThe roof rack I recommend for you is the Yakima JetStream Roof Rack with 60 Inch Long JetStream Bars # Y00426, BaseLine Towers # Y28TR, Fit Kit # Y06125 for the front bar, and Fit Kit # Y06143 for the rear bar. The JetStream crossbars feature an aerodynamic shape to help minimalize wind noise and keep the ride quieter than racks that use more traditional round or square crossbars. This rack is designed to fit your Civic coupe and will mount in the door well for both the front and rear crossbars....
view full answer...
- Can 48 inch Yakima Crossbars Fit on 2008 Mazda 3 5 DoorSince the Q Tower system is no longer the current roof rack Yakima roof rack and has been phased out we don't have the parts needed to install a Q Tower setup with 48 inch long bars but I was able to check with Yakima and the 48 inch bars are correct for your vehicle. The current roof rack components needed are the BaseLine Roof Rack part numbers # Y00408, # Y28TR, # Y03536, # Y06143, and # Y06111.
view full answer... - Roof rack for a 2008 Mazda 3 WITHOUT Fixed Mounting Points on the RoofSince your 2008 Mazda 3 sedan does not have the fixed mounting point on the roof you will need to use a different style of roof rack but not a raingutter mount system. I have included a link to all of the options for a 2008 Mazda 3 sedan without fixed mounting points. If you like the Yakima system you will need the following parts: 58 inch crossbars # Y00409 BaseLine Towers # Y28TR RoundBar Adapters # Y03536 BaseClips # Y06143 and # Y06111
view full answer... - Recommended Roof Rack And Carrier For Two Kayaks On 2013 Honda FitTo be able to carry two kayaks on your 2016 Fit I recommend a roof rack and a kayak carrier. The roof rack I recommend is the Yakima roof rack. This roof rack includes round 48-inch long crossbars along with the towers, base plates and fit kit. To order this roof rack you will need part # Y00408, part # Y28TR, part # Y03536, and part # Y06143. The kayak carrier I recommend is the Yakima JayLow, part # Y04073. This attaches to the crossbars and you can place a kayak on each side of the...
view full answer... - Recommended Roof Rack for a 2014 Honda Civic Si CoupeTo add a roof rack to your 2014 Honda Civic Si Coupe you will want the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06125 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06143 This roof rack attaches to the groves inside your door...
view full answer... - Recommended Roof Rack for a 2024 Lexus ES 300h w/out Roof Rails Congrats on the new car! Yes, we do have a roof rack set up that will work with your 2024 Lexus ES 300h even though you don't have the side rails. This mounts directly to your roof with custom fit clips and the crossbars will not overhang the side. I recommend the roof rack by Yakima and it includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y89UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item...
view full answer... - Recommended Roof Rack for a 2024 Lexus ES 350 w/out Rails and No Glass Roof Yes, there is! Since your 2024 Lexus ES 350 does not have rails or the glass roof top you can use the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y89UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06143 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06170 This aero bar roof rack system has a 165 lbs capacity. I have attached a couple...
view full answer...
- Roof Rack Needed with Level Crossbars for Transporting Plywood with 2019 Lexus ES 300hAs long as you just have a sun roof on your 2019 Lexus ES 300h and it isn't the full-blown panoramic roof then we do have roof rack options for you. For your application I recommend going with the Yakima JetStream system because the BaseLine Towers that come with it have a few adjustments in them to help keep your crossbars level with each other. Other systems rely on rubber inserts for the fit kit but the Yakima system is mechanical and I believe it produces the best answer for your situation....
view full answer... - Roof Rack Recommendation for 2007 Honda AccordWhile we don't have a Thule roof rack available for your 2007 Honda Accord we have the very similar quality Yakima JetStream roof rack part numbers # Y00428, # Y28TR, # Y06159, # Y06143 that is a fit. Yakima and Thule are both widely considered to be the nicest roof racks out there so this rack would be a really great option.
view full answer... - How to Carry 4 Bikes with a 2017 Hyundai IoniqThe hitches available for your 2017 Hyundai Ioniq are all Class I hitches like the Draw Tite part # 24963 which is a confirmed fit. Class I hitches can only carry up to 2 bikes at a time since they are for lower capacity vehicles. Any more than that and the weight and leverage of the additional bikes stresses the hitch/vehicle too much. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Thule Camber 2 part # TH9058. We asked our demo and install guys...
view full answer... - How to Carry a SUP on the Roof of a 2019 Hyundai IoniqYou can definitely use the SeaSucker Board Carrier # 298-BX1806 on your 2019 Hyundai Ioniq but this is actually a carrier in and of itself so it doesn't require a roof rack on your vehicle and you wouldn't be able to install your Thule SUP carrier to it. If you still want to stick with your Thule SUP carrier then I recommend the Yakima JetStream roof rack which consists of 50" JetStream Bars # Y00425 Black, the BaseLine Towers # Y28TR, and the Fit Clips # Y06175 and # Y06111. You can add...
view full answer...
- Solution for Transporting Bikes with 2018 Hyundai Ioniq ElectricSince you have the electric version of the 2018 Hyundai Ioniq the only solution we have for carrying bikes will be with a roof rack since none of our hitches are a fit and we also do not have any trunk racks. So for a roof rack we have the Yakima CoreBar Rack part numbers # Y00421, # Y28TR, # Y06175, and # Y06111 which is a confirmed fit and would work great. These bars are aero shaped so you'll have minimal wind noise and this rack is very easy to install as well. Then for bike racks...
view full answer... - Options to Transport Bikes on My 2022 Hyundai Ionic Plug-In HybridWhile we do have a bike rack option for you, we currently do not have any hitches that we well that can allow you to mount a rack for your plug-in Hybrid 2022 Hyundai Ioniq. This is because since your model is a new model, manufacturers have not engineered a model that fits the exact design of your vehicle quite yet. With that being said, I recommend using a trunk bike rack like the Yakima FullBack 2 # Y02634 or the FullBack 3 # Y02633. Not only does the FullBack include a 35-pound per...
view full answer... - Kayak Carrier and Roof Rack Recommendation for 2006/2007 Mazda 3 HatchbackFor a two kayak carrier that would work great on both of your Mazda 3's you would want the Yakima BigStack part # Y04041. This will carry your two kayaks easily and comes with all of the needed straps to secure them. For both your 2007 and 2006 Mazda 3 the same Yakima roof rack will fit and work well. You would need the part numbers # Y00408, # Y28TR, # Y03536, # Y06143, and # Y06111.
view full answer... - How to Carry Bikes on a 2017 Hyundai Ioniq ElectricIf there is enough demand then the hitch manufacturers will make a hitch for the electric version of the 2017 Hyundai Ioniq. But as of right now I have not heard of one in the works. Right now the only way to carry bikes on your Ioniq is a roof rack. The most cost effective option is a Yakima rack using the following parts: CrossBars # Y00408 BaseLine Towers # Y28TR RoundBar SL Adapter # Y03536 BaseClip Fit Kit (front) # Y06175 BaseClip Fit Kit (rear) # Y06111 Then you could add a bike...
view full answer... - Rola Roof-Rack System for a 2009 Mazda 3 with 4 doorsFor a 2009 Mazda 3 there are several roof rack options depending on how your vehicle is equipped. For a 4-Door with fixed mounting points with no existing rails or crossbars you can use the Rhino Rack roof racks which is made up of the following parts: # RRVA118B-2, # RRRLKVA, and # DK289. For a 4-Door without fixed mounting points with no existing rails or crossbars you can use the Yakima Roof Rack made up of the following parts: # Y00426, # Y28TR, # Y06143, and # Y06111.
view full answer... - Can 48 inch Yakima Crossbars Fit on 2008 Mazda 3 5 DoorSince the Q Tower system is no longer the current roof rack Yakima roof rack and has been phased out we don't have the parts needed to install a Q Tower setup with 48 inch long bars but I was able to check with Yakima and the 48 inch bars are correct for your vehicle. The current roof rack components needed are the BaseLine Roof Rack part numbers # Y00408, # Y28TR, # Y03536, # Y06143, and # Y06111.
view full answer... - Roof rack for a 2008 Mazda 3 WITHOUT Fixed Mounting Points on the RoofSince your 2008 Mazda 3 sedan does not have the fixed mounting point on the roof you will need to use a different style of roof rack but not a raingutter mount system. I have included a link to all of the options for a 2008 Mazda 3 sedan without fixed mounting points. If you like the Yakima system you will need the following parts: 58 inch crossbars # Y00409 BaseLine Towers # Y28TR RoundBar Adapters # Y03536 BaseClips # Y06143 and # Y06111
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.