Custom Fit Roof Rack Kit With INB147 | INK742 | INSUT
Item # IN65TR
Our Price: $359.97
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
- All Info
- Reviews (288)
- Q & A (0)
- Videos (11)
- Photos
Inno Roof Rack - IN65TR
- Crossbars
- Square Bars
- 2 Bars
- 58 Inch Bar Space
- Inno
- Black
- Overhang
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
Features:
Inno Square Load Bars - Black - 58" Long:- Square crossbars let you build a roof rack for your vehicle
- Pair with Inno feet and custom fit kit to create a complete roof rack
- Standard square bars provide exceptional load support
- Clamp-on carriers and accessories conveniently wrap around bars
- Elastomer coating helps to prevent rust and cushion your load
- Endcaps keep out dirt and water
- Hardened steel construction is strong and durable
- Black color
Inno Custom Fit for XS200, XS250, and INSU-K5 Roof Rack Feet:
- Custom-fit clamps and pads let you install Inno roof rack feet on your vehicle with a naked roof
- Works with XS200, XS250, or INSU-K5 feet
- Pairs with 4 feet and 2 crossbars to create a complete roof rack
- Clamps are designed specifically to fit the curves of your doorjambs
- Mount to roof rack feet with bolts
- Molded pads are custom designed to fit the contours of your roof
- Protect your roof surface from scratches and abrasions
- Press onto the bottoms of your roof rack feet
Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4:
- 4 Feet let you mount Inno square crossbars on your vehicle's naked roof
- Pair with 2 crossbars and a custom fit kit (sold separately) to create a complete roof rack
- Bases pivot to ensure crossbars are level on your roof
- Locking torque knobs secure system to your roof
- 2 Keys included
- Durable, weather-resistant AES plastic construction
- Tool-free installation and removal - no drilling required
- Torque knobs prevent over- and under-tightening
- Black color
Specs:
Inno Square Load Bars - Black - 58" Long:- Quantity: 2 crossbars
- Weight capacity: 220 lbs
- Always observe your vehicle's maximum roof load capacity
- Dimensions: 58" long x 7/8" tall x 1-1/4" wide
- Limited lifetime warranty
Inno Custom Fit for XS200, XS250, and INSU-K5 Roof Rack Feet:
- Quantity: 4 clamps and pads
- Limited lifetime warranty
- Stay height: 3-7/8"
- Weight capacity: 132 lbs
- Always observe your vehicle's maximum roof load capacity
- Limited lifetime warranty
IN-B147 Inno Standard Square Steel Load Bars - 58" Long - Black
K742 Inno Fit Kit Hooks for Flush, Through, and INSU-K5 Stays
Replaces INK228
IN-SUT Inno Roof Rack Stays for Bare Roofs - Black - Qty 4
Replaces Inno INSU-K5
Video of Custom Fit Roof Rack Kit With INB147 | INK742 | INSUT
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Inno Roof Rack Installation - 2018 Chevrolet Traverse
Hi everyone. It's Evangeline, right here at etrailer. And today, we'll be taking a look at our Inno Roof Rack System with the Inno Square Crossbars, the Inno Feet for Square Crossbars, and the Custom Fit Inno Fit Kit on our 2018 Chevrolet Traverse. So, this is the Square Roof Rack System from Inno. You have different options for your Chevrolet Traverse. You could get Aero Crossbars, which are that more modern crossbars, or you could get these Square Crossbars.
Some reasons you might like them, is maybe you have older accessories that can only fit around square crossbars, or if you want something lighter, or if you want more overhang and have the ability to do so, you can with square crossbars. You do get an overhang of 2 1/4 inches of overhang from the tower to the endcap. So, this will determine, if you do have other accessories, let's say kayak carriers that require a little bit more overhang, you can very easily upgrade to longer crossbars if needed. The crossbars themselves have a weight capacity of 220 pounds, which is very impressive. But remember, you are limited by whichever is lower of the weight capacities, be it your crossbars, your towers, or your actual roof weight capacity.
In our case here, our Inno Feet for Square Crossbars has a weight capacity of 132 pounds. So, that's kinda being pretty much a limiting factor. Now, this is a lockable system. Meaning once you have these keys, you could just put them right into your towers, and this allows you to loosen or tighten down your towers and just help deter theft of your roof rack. While the Traverse can have raised side rails, or it might also not have raised side rails, in our case here, this is a naked roof, so we do have this custom-fit kit for our roof.
Now, the downside to that is you are limited to a very specific spot on your vehicle to place those towers, which gives you a crossbar spread of 26 inches from this point to that point. And that will be the crossbar spread that you will have to use with whatever accessory you have on there. I am five two, and as you can see, it's kind of a reach to get onto the top of our Chevrolet Traverse, which may be something worth considering with getting more or less overhang. Another thing I recommend adding to your repertoire is maybe you should take a look at the Moki doorstep, which hooks right into your door and gives you a little extra height, which may be useful as you have a roof box, a roof basket, or let's say you're strapping down a kayak. Now, let's talk about roof clearance.
So, first is the clearance from the lower crossbar to the top of your roof. That's gonna be the clearance for your clamps, or if you have skis and snowboards, you wanna see if there's enough space for your bindings before they hit your roof. So, measuring from the roof to the crossbar, it's at about 3 1/4 inches. As for the roof height this adds to your vehicle, it sits at about 4 1/4 inches. The crossbar itself is made of steel, but it is coated with this rubberized material, which is gonna help with scuffs and scratches, but also keeps this system on the lighter side as it's on your booth, but while maintaining its great weight capacity. So, my personal thoughts about our Inno Roof Rack here on our Traverse, is I do like the Aero Style Crossbars, simply because I like to use the more modern accessories that utilize the T-track channels, and things like that. But, I do understand that others still have accessories that work best with the square design on your more traditional crossbars. Also, they do sit a little bit more low profile, and they're on the easier side to throw on, compared to the Aero Crossbars from Inno. So, you have your pros, you have your cons. I personally recommend upgrading to the aero system if you can, but if you need that extra overhang, this is still a good system that will work on your Traverse. So, the install process is kind of involved, but that's what this video is for, right Because, we wanna make sure that you get the correct rear crossbar and the front crossbars in the correct places. You're gonna have three sets of things, which is gonna be your fit kit, and those have different foot pads with different numbers. Then you have your towers, and these are gonna be what's holding your crossbars up in place. And finally, you have your square crossbars. So, first we're gonna set up the fit kit with the tower. Notice how your fit kit has a number underneath the foot pad. So this is four two seven, and that's gonna go on your front crossbar. And then you're gonna have another set, which is four one nine, and those go on the rear crossbars. Since I already installed the rear crossbar, we can install the front crossbar together. So, get your foot pad and just pop it into the tower itself. Once those foot pads are set up and secure, you're then going to set up the fit hooks. So, you may have a lock on the end of your tower, kinda like what I have here, so that has to be unthreaded first. Once that's out, you also have this lock, and that's gonna go to the side as you place your hook in, kinda fit that into place, and then get this lined up as well. And do the same thing on the other tower. With your towers now set up, you can then attach the towers to your crossbar. So, notice where this lock is. If you push that lock down, you can see how the bracket on the top of your tower goes down as well. So, get that lined up and just push that down, because that's gonna be what you'll use to attach your crossbar. Once you have that push down enough, it should slide right onto that crossbar. Now do the same on the other side, and then you can take some measurements. So, you're gonna measure the stay interior dimensions. And what that means, is measuring from one crossbar tower to the other crossbar tower. You're gonna get a specific length. That length is going to be inside your instructions. It's gonna be different for your front and your rear. So for your rear crossbar, which is this, it's going to be 47 1/4 inches long. To also make sure that your towers are in the right spots, Inno gives you the halfway mark instructions as well. So for your rear crossbar, it's gonna be from the center of the crossbar, there should be a marker on your crossbar, all the way to the end of the stay. It's going to be 23 5/8 inches to that point. So measure it and then address it accordingly. And now that we have our tower set to exactly where we want them to be, the next step is to put it onto our vehicle, but first let's take some measurements. So, you're gonna install your towers at a very specific point on your Chevrolet Traverse. So, for your rear tower it's going to be from the seam of your door, 21 3/4 inches to the center bolt of your tower. And then for your front crossbar, it's gonna be four inches from that seam towards the front of your vehicle. So, I have my friend, Tom, here, who's gonna help me out. We're gonna bring this up and over our vehicle, being very careful as we open the door, and then place it four inches away from that door seam. So, once you determined that it is four inches from that front seam, you're gonna then going to lift this hook up, and tighten this bolt down. It's a good amount of thread, so just keep going until it fully secures. Once you feel like you've gotten it tightened enough down, push this in, and then twist the lock to secure it. So, since that hook is custom-fit for your vehicle, once you do have it tightened down, don't be afraid to just slam your door on it, because it fits right in there. Don't forget to put the rubber endcaps onto your square crossbars. And once all four of those are in place, that's it for the install. And that was a look right here at our Inno Square Roof Rack system, here on our 2018 Chevrolet Traverse. My name is Evangeline, and I hope you enjoyed the journey..
Customer Reviews
Custom Fit Roof Rack Kit With INB147 | INK742 | INSUT - IN65TR
Average Customer Rating: 4.7 out of 5 stars (288 Customer Reviews)
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.by: Lisa L.04/07/2023
Great looks, feels very sturdy. Super easy to install. Only downside is they are a little noisy, but that was expected from the square bars. Went with square bars to use my older Thule kayak and bike rack systems. I installed the Inno mounting system myself...no problem. Directions were very good!
by: 04/23/2024
Been a month haven’t received them yet they are in stock but guess we are waiting for one item which it’s in stock date gets pushed back every day. And the company doesn’t let the customer know the date changes or when they will send it.
by: Michael09/21/2023
2015 Honda Civic
Good quality rack system, easy to assemble and install, works well, looks good, fair price, I'm very satisfied with this purchase. I appreciate the guidance I received from William B. at the beginning of my search for a roof rack to carry a canoe on my 2015 Honda Civic. Two thumbs up for this purchase.
by: Blah Blah Blah Motorcycles04/08/2024
Easy to install and have worked great so far!
by: Ferne03/27/2024
Super easy to install and remove. Lock feature is great
by: Caitlin08/10/2023
Volkswagen Golf
Works well, has stayed attached with no issues. We've used them (plus the bars) to keep a canoe and a rocket box on the car at different times throughout the year (not at the same time, it's on a tiny golf).
by: Chris02/21/2024
Incredible engineering: does not feel like an aftermarket rack. Easy to take off if necessary. Solid; highly recommend.
by: David 05/08/2024
Perfection!!!
by: Charles 05/10/2024
Perfect fit.
by: Chris07/13/2023
Worked great! Traveled with a carrier on these racks from Chicago to Seattle. No issues, would buy again!
by: Brian Kashner02/21/2023
Odelia was extremely helpful in helping me choose the right product. I had an end-cap that was missing and she sent me whole package of four. This is the kind of customer support one hopes to receive when deciding to spend a few hundred dollars on a product. I will definitely return to etrailer if I need another car rack for our other car.
by: Jake 04/07/2023
Just what I was looking for to put up my rooftop tent. These are also a fraction of the cost for Yakima bars.
by: William11/16/2020
etrailer.com you guys are great every thing came on time. i bought the inno sq bar roof rack for its price point and i like the look. I have a thule roof box I need to mount . The SQ bars are a bit noisy so I plan on buying the rack faring. On the front mounting pads the directions say there is a gap but it seems extreme i will post a pic I also checked the measurements 3 times. when i get a chance i might re-adjust the front pads.. Please Advise
by: Greg C10/25/2023
An excellent product! Amazingly best price around, excellent service and fast delivery! Definitely going to be shopping Etrailer with future purchases.
by: CP05/12/2023
Great roof rack. Easy to install and du rable!
by: LD05/14/2023
Toyota
Worked well for my 2006 Toyota Prius
by: David08/12/2018
Installation is easy. Just follow directions. Front bar parts are different than rear bar parts so you need to look at part numbers and use in correct location. Rack is only rated for 100 pounds but looks and feels much stronger than rating. As noted square bars do create lot of wind noise when driving. Purchase this product to carry my Canoe and it does that at almost $200 less than other rack systems on market. For me the square bars are better fit with ratchet straps to hold Canoe down. Hard to find ratchet strap with hook to fit areo bars.
Dislike. No way to level square bars. With car on level ground high point to high point on bars is level. But each bar is off by 1/8" front to back. Wish they were round bars.
by: Bradley07/16/2020
2003 Toyota Tacoma
Good morning so the order I got is amazing I have a old school thule roof rack that I needed the write stuff so can start putting bikes on my roof an my fishing gear or some small stuff for off roading an it works great I will be sure to be buying more stuff from this site great job with the shipping it was very fast an packaging was great it was easy to install an it looks great on my 03 Toyota tacoma thanks again
by: Josh12/12/2020
I’ve had many Thule and Yakima racks over the years, both great products, but this Inno product is equally as good if not better at a much better price, I couldn’t be happier! Courtney was super helpful shipping was FAST!! Don’t hesitate....
by: Ian07/26/2023
I have two standup paddle boards that literally live in the racks, and have since day one.
The racks are awesome.
by: James06/06/2022
Quick and easy. This roof rack was shipped quickly. Installation was super easy and it looks like it was made for my truck. Holds my canoe perfectly. Thank you!
by: Grayson Wade07/07/2017
Product arrived on time and packed very professionally. Was very satisfied with the overall quality of the product. Everything went right together and fit perfectly. I dealt with a gentlemen named George J. He was very professional and extremely helpful throughout the whole process with updates letting me know how my order was going. Very happy with the product.
by: Kevin12/19/2022
Product seems to be good, but service could use some work! Four months to get product, that seems to be a lengthy time to wait!!! After finally getting the rack pieces I needed, it seems to fit well! Has very good instructions and videos.
by: Dave 04/11/2023
Excellent product. Well constructed, and came with clear
instructions specific to my vehicle.
25
995
Show More Reviews
See what our Experts say about this Inno Roof Rack
- Rooftop Cargo Basket for 2005 Toyota Tundra Double Cab With Inno Square Bar Roof RackWe do have a rooftop cargo basket for your 2005 Toyota Tundra Double Cab that will work with the square bar roof rack from Inno, which consists of the following: - Inno Square Crossbars # INB147 - Inno Feet for Square Crossbars # INSUT - Custom Fit Kit # INK532 What you will need is a rooftop cargo basket and rooftop cargo bag, which you can combine to give you the same amount of carrying capacity as a rooftop cargo box. The best option is from Yakima: - Yakima LoadWarrior Roof Rack...
view full answer... - Roof Rack for 2017 MDX with Naked Roof for Carrying 2 KayaksI would go with an aftermarket roof rack for your 2017 Acura MDX as it's going to cost considerably less and be just as good if not better. For the money and the quality the Rhino Rack # RRVA137B-2, # RRRLKVA, and # DK400 is the best option. It gives you an aero bar roof rack that's very high quality at a price that beats the higher end rack manufacturers. The INNO kayak carrier part # INA450 then would be a great choice as it can carry up to 2 kayaks like what you need.
view full answer... - Inno Roof Rack Recommendation for 2007 Subaru ForesterFor your 2007 Subaru Forester with raised side rails we have the Inno roof rack part numbers # INB117, # INTR, # INTR104 that INNO recommends as a fit. The bars that come with this, # INB117 are 46 inches long. If you wanted the longer 58 inch bars you'd need the part # INB147.
view full answer... - Will Inno Feet for Rain Gutters Work With Side Loader Mounting BracketsThe Side Loader Mounting Brackets part # Y08002 are simply bolt-on artificial rail gutters so they should work just fine with the Inno Feet for Square Crossbars part # INLD. The Inno Square Crossbars part # INB147 would then be compatible with the Inno Feet for Square Crossbars.
view full answer... - Will the Inno Square Crossbars Fit the Thule Tracker II Feet?Yes. Since the Inno Square Crossbars # INB147 have the same dimensions as the Thule SquareBar Evo Crossbars # TH712300 (7/8" tall x 1-1/4" wide), the Inno Square Crossbars will fit the Replacement Railing Foot for Thule Tracker II 753-2152..
view full answer... - Does Inno Square Bar Roof Rack Fit 2009 Acura MDX With Naked RoofYes, the Inno square bar roof rack will absolutely fit your 2009 Acura MDX with a naked roof You do need to purchase the legs separately, and everything you need for the complete Inno roof rack on your 2009 Acura MDX are the following: - Inno Square Crossbars # INB147 - Inno Feet for Square Crossbars # INSUT - Custom Fit Kit # INK590 Since these are square crossbars, I do recommend considering a wind fairing to help minimize the wind noise, with the correct one being the Inno Fairing...
view full answer... - Parts Needed to Mount Rooftop Cargo Basket on 2014 Ford Flex with Bare RoofThe Surco Safari Rack 5.0 Rooftop Cargo Basket for Factory Rails # SPS4550-1101 is designed to fit on vehicles that have raised roof side rails but not a compete roof rack with crossbars. It cannot mount on a vehicle with a bare roof. To install a rooftop cargo basket on your 2014 Ford Flex you will need to first install a roof rack system. The linked page displays all roof racks offered for your Flex with bare roof. The lowest-cost option is the square bar system from Inno consisting...
view full answer... - Are the Inno Square Crossbars # INB147 and the Malone SteelTop Roof Rack # MPG202 the Same?I have an answer for you. Unfortunately, the Inno Square Crossbars # INB147 does not come with the feet (that have the locking mechanism) that are needed to mount the crossbars to your 2018 Honda Odyssey's roof. The Malone SteelTop Roof Rack # MPG202, on the other hand, comes with all the parts needed to mount onto your vehicle's roof. For the feet for the Inno crossbars, that is part # INFR. Other than the feet on the Inno square crossbars, another difference between the roof rack systems...
view full answer... - What Crossbars Should be Used with Inno Roof Rack Feet part # INMDKYou need to use Inno crossbars with the Inno Feet part # INMDK that you referenced. Based on the length you said you wanted you'd want the part # INB147 which is a pair of 58 inch long bars.
view full answer... - Fit of the Inno Square Crossbars On A 2020 Chevrolet TraverseYes, the Inno Square Crossbars # INB147 with the Inno Feet for Square Crossbars # INSUT and the Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet # IN63FR will work great with your 2020 Chevrolet Traverse LS. These crossbars measure 58" long x 7/8" tall x 1-1/4" wide and has a weight capacity of 220-lbs.
view full answer... - How to Carry 2 Kayaks with the Darby Extend-A-Truck Kayak Carrier on a 2013 Toyota TundraThe foam block that comes with the Darby Extend-A-Truck Kayak Carrier # DTA944-968-924 is really only meant to be used with 1 kayak so if you plan on carrying 2 you need to acquire more blocks with part # MPG158. We do have some tie-downs attached to the load extender down to the safety chain loops to help stabilize the load extender. Please note that this kit is meant to be used for short distances as the roof rack crossbar is very basic and isn't meant for long distance traveling. If...
view full answer... - Will the Thule Stacker Work with the Inno Square CrossbarsYes, the Inno Square Crossbar System part # INB147, part # INSUT, and part # INK263 which is a fit for your 2011 Ford Flex will work with the Thule Stacker part # TH830. This option will allow you to carry multiple kayaks on the roof of your vehicle. The roof racks comes with locks for security and the carrier comes with tie-downs. I have attached a review video on each of these items for you. Please note that the weight of the roof rack, stacker, and water sport accessories will need...
view full answer... - Can 2007 Chevy Suburban w/ Raised Rails Use Inno Square Crossbars Longer Than 54 InchesIf you'd like you can go with Inno square crossbars that are longer than the 54 inch # INB137 on your 2007 Chevy Suburban with raised side rails. There aren't 60 inch crossbars but you can go with 58 inch long bars to give you some extra space, and here is exactly what you will need: - Inno Square Crossbars - 58" Long # INB147 - Inno Feet for Square Crossbars - Raised Side Rails # INFR This will give you a nice amount of added room to carry cargo on top of your '07 Suburban, and the...
view full answer... - Weight Limit of Thule Traverse Roof Rack with FitKit # THKIT1520 on 2014 Ram 1500 Crew CabThe different components that make up the Thule Traverse roof rack for your 2014 Dodge 1500 crew cab have differing ratings. The load bars # INB147 for example are themselves rated for 165-lbs while the foot pack and fit kit are rated lower, 130-lbs. It can also be that the vehicle has a lower roof weight rating than any of the rack system components. Whenever different parts of a system have different ratings, the lowest-rated one determines the overall capacity. My contact at Thule...
view full answer... - Roof Rack Fit for 2013 Toyota Tundra CrewMaxWe do have a reasonably-priced roof rack option for your 2013 Tundra CrewMax, but none of the SportRack roof racks like the # SR1002 you mentioned would be compatible. Inno offers a roof rack that would be assembled from the following parts: 58 Inch Square Crossbars, part # INB147 Roof Rack Feet, part # INSUT Vehicle Specific Clamp Kit, part # INK742
view full answer... - How Do I Know Which Roof Rack Accessories Will Work With My Roof Rack On 2012 Scion XB?When determining if certain accessories can be mounted to a roof rack system you want to look at a few things. First, if it is a clamp-on accessory then you to make sure it can fit the style of roof rack that you have (square, round, aero etc.). You then want to check the max crossbar dimensions that the accessory can fit and make sure the roof rack is not bigger than that max dimension; these dimensions are typically listed on the product page of roof racks and any roof rack-mounted accessories....
view full answer...
- Can You Use Square Thule Crossbars On An Inno Roof Rack Installed On 2008 Scion xB?You will want to stick with one brand throughout the entire roof rack kit; various brands of roof racks are not made to be compatible and interchangeable with each other. The most economical roof rack for your 2008 Scion xB is Inno Square Crossbars - Steel - Black - 58" Long - Qty 2 # INB147 with Feet # INSUT and Fit Kit # INK300. This has a weight capacity of 120lbs.
view full answer... - How To Carry Bike and Cargo Box On 2012 Acura MDX with Bare RoofThe Inno Square Crossbar System part # INB147, part # INSUT, and part # INK590 is an excellent cost effective option for a 2012 Acura MDX and it even comes with locks for security. It can then be used for a bike rack like the Inno Tire Hold II Roof Bike Rack part # INA389 and a cargo box like the SportRack Vista XL Cargo Box part # SR7095. The two should fit together width wise no problem and because the cargo box has a higher profile rather than longer length it should clear the hatch...
view full answer... - Roof Rack Recommendation for 2015 Toyota Tundra Double CabI have a great priced roof rack option that is confirmed as a fit for your 2015 Toyota Tundra Double Cab, but the Sport Rack part # SR1002 is not a confirmed fit, and even if it was I wouldn't recommend it for you since it is a semi-custom rack that has a reputation as not fitting all of the vehicles it's listed for perfectly. Instead the INNO rack part numbers # INB147, # INSUT, and # INK742 would be your best option.
view full answer... - Using Two Thule Hullavators on 2014 Chevy Volt with Inno Roof RackThe minimum crossbar spread the Thule Hullavator part # TH898 can fit is 24 inch so if you have a 26 with an Inno rack installed that would work great. Since you already have the two Hullavators you may as well go that route. Especially since they are really nice and assisted. So for that you'd need the part numbers # INSUT, # INK624, and # INB147 and you'd be set.
view full answer... - Roof Racks for 2011 Acura MDX with Naked RoofAll aftermarket roof racks for your 2011 Acura MDX that has a naked roof are shown on the linked page. These include racks from Yakima, Rhino-Rack and Inno. All of these rack systems will use door jamb clamp-style attachments to mount onto your vehicle's naked roof. The main differences between these racks are their bar shapes (square, round or elliptical), their bar spacing and their weight ratings. These features are noted for each rack system shown. The widest bar spread and highest...
view full answer... - Will Inno Ski and Snowboard Roof Rack Fit On Roof Of 2013 Ford Flex Without a Roof Rack? I was able to verify with Inno that you will need a roof rack to use the Inno Ski and Snowboard Roof Rack # INTX726 on your 2013 Ford Flex with the bare roof. They do not have a way to install the rack the way you see in the image you found. The Inno Square bar rack consisting of the Crossbars # INB147, Feet # INSUT and Fit Kit # INK263 will allow you to mount their carrier. The mounts for the roof rack are very similar in the way they clamp to the door frames. We do have the SeaSucker...
view full answer...
- Rhino-Rack Roof Rack Parts for a 2011 Infiniti G37The Rhino-Rack 2500 parts you need for your 2011 Infiniti G37 include the following: 46" Vortex Aero Crossbars - # RRVA118B-2 2500 Series Legs - # RRRLKVA Fit Kit - # DK211 The Rhino-Rack crossbars only have a limited amount of space on the underside of the crossbars so you will be limited to the 46" crossbars. If you'd like to use longer crossbars then I recommend checking out the Inno Square Crossbar setup: 50" Crossbars - # INB127 Feet - # INSUT Fit Kit - # INK735 If you'd like to...
view full answer... - Availability Of Replacement Inno Square Crossbar For Stolen CrossbarInno does not sell single square bars, so even though you only need one bar you'll need to buy a pair. You didn't mention anything about the size of your crossbar, so you'll need to measure your current crossbar and match it to one of the below lengths: 42" # INB107 46" # INB117 50" # INB127 54" # INB137 58" # INB147 65" # INB165
view full answer... - Roof Rack Recommendation for 2018 Hyundai Tucson to Carry Thule HullavatorTo install a Thule Hullavator on your 2018 Hyundai Tucson with a naked roof (thanks for picture), you will first need to install a roof rack. For that you'd want the Inno Square bar roof rack part numbers # INB137, # INSUT, and # INK680 which is a confirmed fit and will give you bars that the Hullavator can attach to.
view full answer...
- Would Excessive Speed Cause Inno Roof Rack of 2016 Toyota Prius to Fly OffThe Inno roof racks like the part numbers # INB127, # INSUT, and # INK486 are very well made and would easily handle the speeds your 2016 Toyota Prius would be going on the highway. There isn't a speed limit for this rack but we do recommend not exceeding the speed limit.
view full answer... - Best Economically Priced Roof Rack that Fits 2014 Nissan JukeThe Sportrack semi custom roof racks like the SR1010 that you have for your 2014 Nissan Juke unfortunately don't have a great reputation for fitting well which is why I try to avoid recommending them for people. We've found that they tried to make them too universal which means they don't really fit anything that well and it's hard to say which vehicles happen to fit better than others. If you wanted a custom fit rack for your vehicle that is still lower in price the best option is the...
view full answer... - Roof Rack Fit for 2018 Subaru LegacyWe do have several roof rack fits for your 2018 Subaru Legacy, but the crossbar you mentioned is a fit for a 2016 Chevy Spark. For your Legacy, the most economical option we offer would be square crossbar rack from Inno, which would consist of the following parts: Square profile 54 inch long crossbars, part # INB137 Roof Rack Feet, part # INSUT Vehicle Specific Fit Kit, part # INK439 The downside to square bar roof racks is that they're not very aerodynamic, so they can be pretty noisy....
view full answer... - Roof Rack Recommendation for 2002 Isuzu Trooper 4 DoorFor your 2002 Isuzu Trooper we have the Inno Roof Rack part numbers # INB127, # INSUT, and # INK115 which is a confirmed fit and is our best price option too. This would be your best option.
view full answer... - Rooftop Cargo Basket for 2005 Toyota Tundra Double Cab With Inno Square Bar Roof RackWe do have a rooftop cargo basket for your 2005 Toyota Tundra Double Cab that will work with the square bar roof rack from Inno, which consists of the following: - Inno Square Crossbars # INB147 - Inno Feet for Square Crossbars # INSUT - Custom Fit Kit # INK532 What you will need is a rooftop cargo basket and rooftop cargo bag, which you can combine to give you the same amount of carrying capacity as a rooftop cargo box. The best option is from Yakima: - Yakima LoadWarrior Roof Rack...
view full answer... - Roof Rack Recommendation for 1998 Suzuki Sidekick 4 DoorFor your 1998 Suzuki Sidekick 4 door the best value roof rack option we have is the Inno part numbers # INB117, # INSUT, and # INK186. This is a custom fit rack to that would fit much better than the Sportrack had it been a confirmed as well. Which that rack is not a confirmed fit so it definitely can't be used.
view full answer... - Parts Needed to Install INNO Square Roof Rack on a 2014 Mazda CX-5We have INNO roof racks that are a fit for your 2014 Mazda CX-5, but none of them use the foot kit part # INXR that you referenced. If you have a totally naked roof you would want the part numbers # INB127, # INSUT, and # INK758. Or, if you have a roof rack that has rails that run from front to back you would want the part numbers # INB127 and # INFR.
view full answer... - Economical Roof Rack and Cargo Basket Recommendation 2017 Toyota CamryFor an INNO roof rack confirmed as a fit for your 2017 Toyota Camry the parts you would need are # INB127, # INSUT, and # INK872. See install video for more info. For an affordable roof basket, I recommend using the SportRack Vista Roof Mounted Cargo Basket part # SR9035. The SportRack Basket has dimensions of 44" Long x 39-1/8" Wide x 4-1/2" Deep.
view full answer... - Roof Rack and Kayak Carrier Recommendation for 2014 Toyota Yaris with Naked RoofThe first thing you'll need on your 2014 Toyota Yaris is a roof rack to carry a kayak carrier. The best value for that is the Inno square bar roof rack that consists of part numbers # INB117, # INSUT, and # INK791. This rack gives you a higher quality roof rack that fits well and installs easily at the lower price point of the more economic racks. Then for a kayak carrier the Yakima JayLow # Y04073 is a really great choice as it's easy to load, installs easily, and can fold down when not...
view full answer... - Recommendation for Roof Rack to Carry a Ladder on a 1993 Ford FestivaI can help you find the correct roof racks for your 1993 Ford Festiva. An economical option for you is the Sport Rack # SR1003 in combination with the short roof adapter # SR1116 will allow you to have a two bar system even though you only have two doors. This roof racks capacity is 130lbs. Another option and the one that I recommend for your vehicle, is the Inno kit made up of the # INB107, # INSUT, # INJK, and # INK148. This kit uses a short roof adapter # INJK also to accommodate...
view full answer... - Roof Rack Recommendation for a 1992 Honda Civic HatchbackI have a solution for you, but the Rola 59758 is not a confirmed fit for your 1992 Honda Civic hatchback. Instead you would want the Sportrack part numbers # SR1003 and # SR1116 if you are looking for an economically priced option or the Inno part # INB107,# INSUT, # INJK, and # INK130 for a custom fit rack that will fit very well.
view full answer...
- Recommended Fishing Kayak Carrier for 2007 Honda Civic SIA foam block kayak carrier is an economic way to transport a kayak on a naked roof but it isn't the most ideal for highway travel. My recommendation for your naked roof is to use the Inno # INB127 square bar roof cross rails with # INSUT, # INJK, and INK552 fit kits. Then use the Malone MegaWing Sit-On-Top Kayak Carrier with Tie-Downs - V-Style - Clamp On # MPG207 designed for use with fishing kayaks that are a little heavier and wider than traditional kayaks. I also recommend the Malone...
view full answer... - Inno 2016 Scion iM Roof Rack Recommendation with 50 inch CrossbarsYou could use longer crossbars on the Inno roof rack you referenced. That means you would need the # INB117, # INSUT, and then the bars # INB127. All dimensions would be the same. The bars would just stick out further through the feet of the rack.
view full answer... - Affordable Roof Rack Recommendations For 2006 Honda Accord 4 DoorFor your 2006 Honda Accord 4 door, the best roof rack for the cost is the Inno roof rack. This consists of the Inno Square Crossbars # INB127, Inno Feet # INSUT, and Custom Fit Kit # INK294. This is a nice roof rack that are rated for 140 lbs. This is my recommendation for your budget. The most economical option confirmed to fit is the SportRack Semi-Custom Roof Rack for Naked Roofs # SR1002 and this rack has a max capacity of 130 lbs. This option is slightly more economical but...
view full answer... - Inno Roof Rack and J-Style Kayak Carrier for 2019 Honda Civic HatcbackThe Inno square bar roof rack part numbers # INB137, # INSUT, and # INK684 is a great roof rack for your 2019 Honda Civic hatchback with a naked roof to carry kayaks. It's a higher quality square bar rack at a much better price than similar quality racks so it's best value as well. Then for a j-style kayak carrier that would fit this rack well and is padded the Thule Hull a Port # TH834 would be an awesome choice.
view full answer... - Roof Rack Fit for 2003 Chrysler PT CruiserWe do offer some roof rack options for the 2003 Chrysler PT Cruiser. I'd recommend a square bar roof rack from Inno, which would be assembled using these parts: • 50 Inch Square Crossbars, part # INB127 • Roof Rack Feet, part # INSUT • Vehicle Specific Fit Kit # INK153
view full answer... - Inno Square Bar Roof Rack that Fits 2017 Ford Fiesta SedanFor a square bar Inno roof rack that fits your 2017 Ford Fiesta 4 door sedan you'd want the part numbers # INB127, # INSUT, and # INK872 instead actually. This will fit much better than the Sportrack you tried.
view full answer... - Roof Rack and Cargo Basket Recommendation for 1999 Volkswagen New BeetleFor your 1999 Volkswagen New Beetle the Inno Roof Rack # INB127, # INSUT, # INJK, and # INK775 is a confirmed fit. Then for a cargo basket the Rhino Rack # RMCB would be a great choice that would match the size of your roof better than the larger baskets. This measures 47-3/16" long x 35-3/8" wide x 5-1/2" deep.
view full answer... - Bike Rack Solution for 2015 Audi S3I wish we had a hitch for your vehicle, but at this time none of our manufacturers have any fits for the 2015 Audi S3. You could install the Inno roof rack part numbers # INB127, # INSUT, and # INK877 so that you could use a roof rack bike rack like the Inno Slim Fork part # INA387.
view full answer... - Roof Rack System for a 1996 Cadillac DeVilleI do have an option for you but the Inno Square Crossbar System part # INB127, part # INSUT, and part # INK153 is not a confirmed fit for your 1996 Cadillac DeVille. Unfortunately, at this time we do not have a custom fit roof rack for your vehicle. What I can offer you is a universal crossbar like part # DTA968 as this is the only crossbar we have that would work for you. The crossbar secures to the roof via straps that run through the inside of the car. Though certainly not idea it...
view full answer... - Longer Roof Rack Recommendation for 2015 Nissan Rogue with Naked RoofFor a longer crossbar roof rack confirmed to fit your 2015 Nissan Rogue we do have a great solution. You'd need to start with the # INSUT for the feet and part # INK466 for the fit kit. Then for the longer crossbars we have the # INB165 which are 65 inch long crossbars that will fit. You do want to be careful no too go too long with the crossbars as can be an issue pulling into garages etc. Typically the guideline is to not exceed the width of the mirror housings.
view full answer... - Roof Rack Recommendations for the Thule Hullavator # TH898 on a 2010 Toyota FJ Cruiser w/Bare RoofThe absolute best option to mount a Thule Hullavator # TH898 onto your 2010 Toyota FJ Cruiser is by using Inno Square Crossbars. The length of the Inno Square crossbars you need depends on the measurement between the top of your driver's-side door surface to the top of your passenger's-side door surface. This is where the Inno Feet # INSUT mount onto your roof to hold up the crossbars. For example, for the Inno Square 50" Crossbars # INB127 to be the correct size for the Hullavator to...
view full answer...
- Roof Rack for 2010 Ford Focus 2-Door to Carry KayakThere is a roof rack that will fit your 2-door 2010 Ford Focus, but a 2-door version is called a coupe, while a 4-door is called a sedan, so you'll need the option for the 2-door coupe. And there is one rack that will fit the 2010 Ford Focus with two doors, which is from Inno and consists of the following parts: - Inno Square Crossbars # INB117 - Inno Feet for Square Crossbars # INSUT - Custom Fit Kit for Inno # INK571 - Short Roof Adapter Kit for Inno Square Crossbars # INJK I confirmed...
view full answer... - Low Profile Roof Rack to Fit 2014 Toyota Tundra with CrewMax CabWe have two roof racks that are tied for the lowest profile on your 2014 Toyota Tundra CrewMax. The Rhino-Rack and the Inno both measure about 4 inches at the highest point off the roof of your truck. The Rhino-Rack is # RR64YR and Inno consists of # INXB123-130, # INXS200, and # INK742. Both kits include aerodynamic cross bars, T-slots, and locks. I would choose the Inno kit because the rubber strips that slide into the T-slots do not need to get removed or cut.
view full answer... - Thule Roof-Rack Feet Compatible with 2011 Toyota Tundra Double CabFor your 2011 Toyota Tundra Double Cab you will want the Evo Clamp Feet # TH710501 along with the Fit Kit # TH145182. This combination is compatible with your vehicle and the new SquareBar 60 inch # TH712500 that has the slotted channel for the feet. I also recommend locks # TH450400 for to secure your investment. If you are upgrading, you may want to consider the WingBar # TH711520 for a more aerodynamic bar with a top channel for some accessory compatibility. If you have the old Thule...
view full answer... - How to Carry 2 Kayaks with the Darby Extend-A-Truck Kayak Carrier on a 2013 Toyota TundraThe foam block that comes with the Darby Extend-A-Truck Kayak Carrier # DTA944-968-924 is really only meant to be used with 1 kayak so if you plan on carrying 2 you need to acquire more blocks with part # MPG158. We do have some tie-downs attached to the load extender down to the safety chain loops to help stabilize the load extender. Please note that this kit is meant to be used for short distances as the roof rack crossbar is very basic and isn't meant for long distance traveling. If...
view full answer... - Recommended Roof Rack and Track System for Truck Topper to Carry Canoe on 2012 Toyota Tundra CrewMaxWe can get you the parts needed to install a roof rack on your truck topper so you can haul your canoe. There are advantages to systems in regards to quality and value, and for your application the best fit is from Rhino-Rack, who is known for their quality, which is consistent with other brands, but often not with as high a price tag. What I recommend is: - Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount # Y02-490B This will give you 59 inch crossbars on your camper shell,...
view full answer... - Roof Rack Fit for 2013 Toyota Tundra CrewMaxWe do have a reasonably-priced roof rack option for your 2013 Tundra CrewMax, but none of the SportRack roof racks like the # SR1002 you mentioned would be compatible. Inno offers a roof rack that would be assembled from the following parts: 58 Inch Square Crossbars, part # INB147 Roof Rack Feet, part # INSUT Vehicle Specific Clamp Kit, part # INK742
view full answer... - Roof Rack Recommendation for 2015 Toyota Tundra Double CabI have a great priced roof rack option that is confirmed as a fit for your 2015 Toyota Tundra Double Cab, but the Sport Rack part # SR1002 is not a confirmed fit, and even if it was I wouldn't recommend it for you since it is a semi-custom rack that has a reputation as not fitting all of the vehicles it's listed for perfectly. Instead the INNO rack part numbers # INB147, # INSUT, and # INK742 would be your best option.
view full answer... - Roof Rack and Cargo Basket Recommendation for 2017 Toyota Tundra Crew CabThe etrailer cargo basket part # e98914 that you referenced is a really great choice for a basket option for your 2017 Toyota Tundra. It's a better priced option that is on par quality-wise with the much more expensive options plus it looks great too. I attached a review video for this for you to check out as well. Then for a roof rack the Inno rack part numbers # INXB130-2, # INXS200, and # INK742 is a really great option confirmed as a fit for your truck. It's an aero bar rack which...
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Ashley K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.