Custom Fit Roof Rack Kit With INB117 | INK244 | INSUT
(298 reviews)
Price: $359.97
In Stock
Custom Fit Roof Rack Kit With INB117 | INK244 | INSUT
Item # IN73GR
Our Price: $359.97
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (298)
- Q & A (0)
- Videos (18)
- Photos
Inno Roof Rack - IN73GR
- Square Bars
- Crossbars
- 46 Inch Bar Space
- Inno
- Black
- Overhang
- 2 Bars
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
Features:
Inno Square Load Bars - Black - 46" Long:- Square crossbars let you build a roof rack for your vehicle
- Pair with Inno feet and custom fit kit to create a complete roof rack
- Standard square bars provide exceptional load support
- Clamp-on carriers and accessories conveniently wrap around bars
- Elastomer coating helps to prevent rust and cushion your load
- Endcaps keep out dirt and water
- Hardened steel construction is strong and durable
- Black color
Inno Custom Fit for XS200, XS250, and INSU-K5 Roof Rack Feet:
- Custom-fit clamps and pads let you install Inno roof rack feet on your vehicle with a naked roof
- Works with XS200, XS250, or INSU-K5 feet
- Pairs with 4 feet and 2 crossbars to create a complete roof rack
- Clamps are designed specifically to fit the curves of your doorjambs
- Mount to roof rack feet with bolts
- Molded pads are custom designed to fit the contours of your roof
- Protect your roof surface from scratches and abrasions
- Press onto the bottoms of your roof rack feet
Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4:
- 4 Feet let you mount Inno square crossbars on your vehicle's naked roof
- Pair with 2 crossbars and a custom fit kit (sold separately) to create a complete roof rack
- Bases pivot to ensure crossbars are level on your roof
- Locking torque knobs secure system to your roof
- 2 Keys included
- Durable, weather-resistant AES plastic construction
- Tool-free installation and removal - no drilling required
- Torque knobs prevent over- and under-tightening
- Black color
Specs:
Inno Square Load Bars - Black - 46" Long:- Quantity: 2 crossbars
- Weight capacity: 220 lbs
- Always observe your vehicle's maximum roof load capacity
- Dimensions: 46" long x 7/8" tall x 1-1/4" wide
- Limited lifetime warranty
Inno Custom Fit for XS200, XS250, and INSU-K5 Roof Rack Feet:
- Quantity: 4 clamps and pads
- Limited lifetime warranty
- Stay height: 3-7/8"
- Weight capacity: 132 lbs
- Always observe your vehicle's maximum roof load capacity
- Limited lifetime warranty
IN-B117 Inno Standard Square Steel Load Bars - 46" Long - Black
K244 Inno Fit Kit Hooks for Flush, Through, and INSU-K5 Stays
IN-SUT Inno Roof Rack Stays for Bare Roofs - Black - Qty 4
Replaces Inno INSU-K5
Video of Custom Fit Roof Rack Kit With INB117 | INK244 | INSUT
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Inno Roof Rack Installation - 2018 Chevrolet Traverse
Hi everyone. It's Evangeline, right here at etrailer. And today, we'll be taking a look at our Inno Roof Rack System with the Inno Square Crossbars, the Inno Feet for Square Crossbars, and the Custom Fit Inno Fit Kit on our 2018 Chevrolet Traverse. So, this is the Square Roof Rack System from Inno. You have different options for your Chevrolet Traverse. You could get Aero Crossbars, which are that more modern crossbars, or you could get these Square Crossbars.
Some reasons you might like them, is maybe you have older accessories that can only fit around square crossbars, or if you want something lighter, or if you want more overhang and have the ability to do so, you can with square crossbars. You do get an overhang of 2 1/4 inches of overhang from the tower to the endcap. So, this will determine, if you do have other accessories, let's say kayak carriers that require a little bit more overhang, you can very easily upgrade to longer crossbars if needed. The crossbars themselves have a weight capacity of 220 pounds, which is very impressive. But remember, you are limited by whichever is lower of the weight capacities, be it your crossbars, your towers, or your actual roof weight capacity.
In our case here, our Inno Feet for Square Crossbars has a weight capacity of 132 pounds. So, that's kinda being pretty much a limiting factor. Now, this is a lockable system. Meaning once you have these keys, you could just put them right into your towers, and this allows you to loosen or tighten down your towers and just help deter theft of your roof rack. While the Traverse can have raised side rails, or it might also not have raised side rails, in our case here, this is a naked roof, so we do have this custom-fit kit for our roof.
Now, the downside to that is you are limited to a very specific spot on your vehicle to place those towers, which gives you a crossbar spread of 26 inches from this point to that point. And that will be the crossbar spread that you will have to use with whatever accessory you have on there. I am five two, and as you can see, it's kind of a reach to get onto the top of our Chevrolet Traverse, which may be something worth considering with getting more or less overhang. Another thing I recommend adding to your repertoire is maybe you should take a look at the Moki doorstep, which hooks right into your door and gives you a little extra height, which may be useful as you have a roof box, a roof basket, or let's say you're strapping down a kayak. Now, let's talk about roof clearance.
So, first is the clearance from the lower crossbar to the top of your roof. That's gonna be the clearance for your clamps, or if you have skis and snowboards, you wanna see if there's enough space for your bindings before they hit your roof. So, measuring from the roof to the crossbar, it's at about 3 1/4 inches. As for the roof height this adds to your vehicle, it sits at about 4 1/4 inches. The crossbar itself is made of steel, but it is coated with this rubberized material, which is gonna help with scuffs and scratches, but also keeps this system on the lighter side as it's on your booth, but while maintaining its great weight capacity. So, my personal thoughts about our Inno Roof Rack here on our Traverse, is I do like the Aero Style Crossbars, simply because I like to use the more modern accessories that utilize the T-track channels, and things like that. But, I do understand that others still have accessories that work best with the square design on your more traditional crossbars. Also, they do sit a little bit more low profile, and they're on the easier side to throw on, compared to the Aero Crossbars from Inno. So, you have your pros, you have your cons. I personally recommend upgrading to the aero system if you can, but if you need that extra overhang, this is still a good system that will work on your Traverse. So, the install process is kind of involved, but that's what this video is for, right Because, we wanna make sure that you get the correct rear crossbar and the front crossbars in the correct places. You're gonna have three sets of things, which is gonna be your fit kit, and those have different foot pads with different numbers. Then you have your towers, and these are gonna be what's holding your crossbars up in place. And finally, you have your square crossbars. So, first we're gonna set up the fit kit with the tower. Notice how your fit kit has a number underneath the foot pad. So this is four two seven, and that's gonna go on your front crossbar. And then you're gonna have another set, which is four one nine, and those go on the rear crossbars. Since I already installed the rear crossbar, we can install the front crossbar together. So, get your foot pad and just pop it into the tower itself. Once those foot pads are set up and secure, you're then going to set up the fit hooks. So, you may have a lock on the end of your tower, kinda like what I have here, so that has to be unthreaded first. Once that's out, you also have this lock, and that's gonna go to the side as you place your hook in, kinda fit that into place, and then get this lined up as well. And do the same thing on the other tower. With your towers now set up, you can then attach the towers to your crossbar. So, notice where this lock is. If you push that lock down, you can see how the bracket on the top of your tower goes down as well. So, get that lined up and just push that down, because that's gonna be what you'll use to attach your crossbar. Once you have that push down enough, it should slide right onto that crossbar. Now do the same on the other side, and then you can take some measurements. So, you're gonna measure the stay interior dimensions. And what that means, is measuring from one crossbar tower to the other crossbar tower. You're gonna get a specific length. That length is going to be inside your instructions. It's gonna be different for your front and your rear. So for your rear crossbar, which is this, it's going to be 47 1/4 inches long. To also make sure that your towers are in the right spots, Inno gives you the halfway mark instructions as well. So for your rear crossbar, it's gonna be from the center of the crossbar, there should be a marker on your crossbar, all the way to the end of the stay. It's going to be 23 5/8 inches to that point. So measure it and then address it accordingly. And now that we have our tower set to exactly where we want them to be, the next step is to put it onto our vehicle, but first let's take some measurements. So, you're gonna install your towers at a very specific point on your Chevrolet Traverse. So, for your rear tower it's going to be from the seam of your door, 21 3/4 inches to the center bolt of your tower. And then for your front crossbar, it's gonna be four inches from that seam towards the front of your vehicle. So, I have my friend, Tom, here, who's gonna help me out. We're gonna bring this up and over our vehicle, being very careful as we open the door, and then place it four inches away from that door seam. So, once you determined that it is four inches from that front seam, you're gonna then going to lift this hook up, and tighten this bolt down. It's a good amount of thread, so just keep going until it fully secures. Once you feel like you've gotten it tightened enough down, push this in, and then twist the lock to secure it. So, since that hook is custom-fit for your vehicle, once you do have it tightened down, don't be afraid to just slam your door on it, because it fits right in there. Don't forget to put the rubber endcaps onto your square crossbars. And once all four of those are in place, that's it for the install. And that was a look right here at our Inno Square Roof Rack system, here on our 2018 Chevrolet Traverse. My name is Evangeline, and I hope you enjoyed the journey..
Customer Reviews
Custom Fit Roof Rack Kit With INB117 | INK244 | INSUT - IN73GR
Average Customer Rating: 4.7 out of 5 stars (298 Customer Reviews)
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.by: Kevin 01/06/2024
Ford Flex
These bars are excellent. I like the coating to protect whatever you're hauling. There is absolutely 0 flex with my kayak mounted, unlike the aluminum aero bars I upgraded from.
by: 04/23/2024
Been a month haven’t received them yet they are in stock but guess we are waiting for one item which it’s in stock date gets pushed back every day. And the company doesn’t let the customer know the date changes or when they will send it.
by: Matthew 01/21/2024
Easy to install, great instructions, looks good, will use for bikes and kayaks, a welcome edition to our gas saver car
by: Michael09/21/2023
2015 Honda Civic
Good quality rack system, easy to assemble and install, works well, looks good, fair price, I'm very satisfied with this purchase. I appreciate the guidance I received from William B. at the beginning of my search for a roof rack to carry a canoe on my 2015 Honda Civic. Two thumbs up for this purchase.
by: Blah Blah Blah Motorcycles04/08/2024
Easy to install and have worked great so far!
by: Ferne03/27/2024
Super easy to install and remove. Lock feature is great
by: Caitlin08/10/2023
Volkswagen Golf
Works well, has stayed attached with no issues. We've used them (plus the bars) to keep a canoe and a rocket box on the car at different times throughout the year (not at the same time, it's on a tiny golf).
by: Chris02/21/2024
Incredible engineering: does not feel like an aftermarket rack. Easy to take off if necessary. Solid; highly recommend.
by: David 05/08/2024
Perfection!!!
by: Charles 05/10/2024
Perfect fit.
by: Chris07/13/2023
Worked great! Traveled with a carrier on these racks from Chicago to Seattle. No issues, would buy again!
by: Hugh02/12/2024
Shipping took considerably longer than originally promised. Product quality & value I consider both to be good.
by: Ian07/26/2023
I have two standup paddle boards that literally live in the racks, and have since day one.
The racks are awesome.
by: Alberto11/22/2022
Really great value! No need to spend a lot on Thule. Even those these are square shaped I actually don't hear much road noise. Besides, you're gonna have music playing or riding with the windows down anyway. I would definitely buy these again.
by: Randy05/23/2023
Missing Parts - I am missing two of the end-caps for the INB117. What is the deal with INNO quality control that it cannot get 4 of these in a box at the same time and tape it shut? I did a search on Google and apparently this a a known QC issue!
by: Brian Kashner02/21/2023
Odelia was extremely helpful in helping me choose the right product. I had an end-cap that was missing and she sent me whole package of four. This is the kind of customer support one hopes to receive when deciding to spend a few hundred dollars on a product. I will definitely return to etrailer if I need another car rack for our other car.
by: Lisa07/23/2020
I am a fifty-four year old single woman and being able to install these roof racks by myself makes me feel empowered!!
I watched a video emailed with my delivery confirmation of an installation on a similar vehicle all the way through first, and then watched it again as I did the steps myself, pausing when I needed to.
The products appear to be of high quality, were packaged/shipped neatly and it was easy to organize everything for installation. I couldn't be happier!
by: David08/12/2018
Installation is easy. Just follow directions. Front bar parts are different than rear bar parts so you need to look at part numbers and use in correct location. Rack is only rated for 100 pounds but looks and feels much stronger than rating. As noted square bars do create lot of wind noise when driving. Purchase this product to carry my Canoe and it does that at almost $200 less than other rack systems on market. For me the square bars are better fit with ratchet straps to hold Canoe down. Hard to find ratchet strap with hook to fit areo bars.
Dislike. No way to level square bars. With car on level ground high point to high point on bars is level. But each bar is off by 1/8" front to back. Wish they were round bars.
by: CP05/12/2023
Great roof rack. Easy to install and du rable!
by: LD05/14/2023
Toyota
Worked well for my 2006 Toyota Prius
by: Bradley07/16/2020
2003 Toyota Tacoma
Good morning so the order I got is amazing I have a old school thule roof rack that I needed the write stuff so can start putting bikes on my roof an my fishing gear or some small stuff for off roading an it works great I will be sure to be buying more stuff from this site great job with the shipping it was very fast an packaging was great it was easy to install an it looks great on my 03 Toyota tacoma thanks again
by: Bob P.07/22/2016
I got these to replace my OE roof racks. The square shape is perfect for Yakima Bowdown kayak racks. Solid!
by: Tom Burger05/23/2021
I followed directions and the rack went on without a hitch. The measuring tape provided was a bit confusing but my tape measure did just fine. It pays to watch for any movement of the stays as you tighten them. It fit perfectly. I was impressed with the quality of the unit. The torque wrench provided was a nice bonus. I attached a boat rack for my rowing shell and I’m confident it will be safe all the way to the water.
by: Mark08/22/2020
One of the lesser expensive rack kits for the Mazda5. etrailer delivered excellent! They had items in stock and shipped quick. I finally had a chance to install it this evening. My only frustration was evening out the bars. Measure, adjust and measure and adjust. I'll look into getting a fairing to reduce wind noise.
25
1001
Show More Reviews
See what our Experts say about this Inno Roof Rack
- Inno Roof Rack Compatibility For A 2019 Toyota RAV4 Yes, the Inno Feet for Square Crossbars # INXP, Custom Fit Kit for Inno Roof Rack Feet # IN33FR, and the Inno Square Crossbars # INB117 are all a confirmed fit for your 2019 Toyota RAV4. Yes, you could swap the 46" # INB117 out for the 50" # INB127 or 54" # INB137 as well since the feet simply clamp down on the bar.
view full answer... - Availability of Fit Kit for Thule 400 Roof Rack Legs on a 1998 Toyota CorollaYour Thule 400 support feet are old enough that there isn't a fit kit, however, The Inno Square Bar roof rack, parts # INB117, # INSUT, and # INK134 fit your 1998 Toyota Corolla and as long as your Thule crossbars are at least 46" long you can just use the feet and fit kit parts # INSUT and # INK134 to complete your roof rack system.
view full answer... - 2008 Chevy Equinox Correct Roof Rack PartsI have a solution to get a roof rack on your 2008 Chevy Equinox but the XS450 legs that you have won't work with the raised rails of the Equinox. The parts that you need for a roof rack include the following: 46" Square Crossbars - # INB117 Feet for Square Crossbars - # INTR Fit Kit - # INTR103 Attached is a review video of this kit on a 2012 GMC Terrain for you to check out.
view full answer... - Roof Rack Recommendation for a 2003 Hyundai Accent 2-Door for Kayak and Bike CarriersThe Yakima Q Tower roof rack will fit your 2003 Hyundai Accent 2-door model and it will support a kayak carrier and a bike rack. Most kayak carriers require a minimum crossbar spread of 24 inches and this roof rack will have a crossbar spread of 28 inches once it is installed. The crossbar spread is the distance between the front and rear crossbar on center. The parts that you will need for the complete roof rack are listed below. Inno Square Crossbars - Steel - Black - 46" Long - Qty...
view full answer... - Are Straps Replaceable for the Thule Crossroad Square Bar LegsThe straps on the Thule Crossroad Foot Pack are not replaceable so if the straps are broken then you need part # 753-3399 which is a single unit. Please note that if you have a 2009 Chevy Equinox like what you put in the fit guide then the only square bar roof rack option that is compatible with your vehicle comes from Inno and includes the 46" Long Square Bars # INB117, Feet # INTR, and Fit kit # INTR103. This only fits if you have the flush mount rails that run from front to back. If...
view full answer... - How to Use Older Thule Square Crossbars for 2007 Subaru Forester with Flush Mount RailsThere are parts you can use for your application! The Inno square bar roof rack system actually uses bars that are the same size as the older Thule square bars so you can use the legs and fit kit from their system to complete a rack for your 2007 Subaru Forester with flush rails. Below are the parts for the complete Inno roof rack - you just need the Inno Feet and Custom Fit Kit: 46" Inno Square Crossbars - # INB117 Feet - # INTR Fit Kit - # INTR104 The Inno feet come with locks so that's...
view full answer... - Can a Roof Mount Cargo Bag be Used on a 2005 Mini Cooper S with No Roof RackSince you do not have anywhere to run the rear strap from a cargo bag designed for naked roofs, I do reocmmend installing a roof rack and using either a bag or cargo box attached to the rack. The most economical rack for your 2005 Mini Cooper is a Yakima rack made of the following parts: CrossBars # INB117 Short roof adapter # INJK Custom Fit Kit # INK118 Feet # INSUT With this rack installed you could then use a cargo bag or box secured to the crossbars. Given the distance you are traveling,...
view full answer... - Recommended Cost-Effective Roof Rack for 2015 Subaru ForesterYou can see roof rack options for your 2011 Subaru Forester by clicking on the link provided. Just select the type of roof you have on the Forester - either raised factory-installed side rails or a totally bare roof - to see compatible racks. If you have raised rails the Inno square bar rack system made of parts # INB117 and # INFR is among the high-value options. This rack offers hardened steel construction and installs as shown in the linked video. If you have a bare roof your lowest-cost...
view full answer... - Roof Rack Options for 2009 GMC Acadia with Raised Factory Roof RailsFor your 2009 GMC Acadia that has raised factory-installed roof rails that run front-to-back, you can see roof rack options on the linked page. We offer both a square crossbar option from Inno and an aero/elliptical bar option from Yakima. From Inno we offer their value-priced square bar rack made of parts # INB117 and # INFR. Installation on an Acadia is shown in the linked video. For a quieter elliptical bar rack we also have the black Yakima RailBar rack, part # Y00447-0448. This rack...
view full answer... - Best Value Kayak and Snowboard Roof Rack for a 2016 Jeep Patriot with Raised RailsOur most cost effective Roof Rack option for your 2016 Jeep Patriot is the Inno Square Bar Roof Rack consisting of # INB117 and # INFR. I definitely recommend this option, since you're looking for good quality at a good price. This is a solid choice for transporting kayaks and snowboards. Please remember to check your owner's manual to be sure that your cargo will not exceed your vehicle's maximum roof capacity.
view full answer... - Roof Rack Recommendation for a 2002 Mazda Protégé5 that has fixed Mounting PointsWhat you are describing are called fixed mounting points and some of the roof racks for your 2002 Mazda Protégé5 do use them to mount to the vehicle. SportRack roof rack # SR1002 however does not use them to mount and do clip onto the door frame. The SportRack roof rack is a semi-custom fit roof rack anyway and would not offer the best fit though it can still be used despite the fact that the vehicle has fixed mounting points. For a true custom roof rack that does use those fixed mounting...
view full answer... - Yakima Jetstream Roof Rack Recommendation for 2019 Mercedes Benz GLC ClassYakima discontinued the Whispbar brand back in 2016 and the bars don't fit the current JetStream style roof racks unfortunately. You'd need an all new roof rack with part numbers # TH711220, # TH710601, and # TH186020.
view full answer... - How to Use Older Thule Square Crossbars on a 2007 Honda CR-VYes, that is exactly what you'll need to do. The Inno roof rack square bar system that fits your daughter's 2007 Honda CR-V uses the following parts: 46" Inno Square Bars - # INB117 Inno Feet - # INXP Fit Kit - # INTR121 As long as your Thule square bars are at least 46" then they will fit just fine. If they are shorter then you'll want to get the whole roof rack system, and if they are longer you just want to make sure that they won't be sticking out past the side mirrors of the CR-V....
view full answer... - Will Inno Square Crossbar Roof Rack Fit on 2003 Subaru Forester X with Rola Roof Cargo BasketYes, the 46" Long Inno Square Crossbars # INB117 are compatible with both your Thule Canyon XT Roof Cargo Basket # TH859XT-8591XT and your 2003 Subaru Forester X. Since your Forester has the flush mounted rails you need the Inno Feet # INTR and the Fit Kit # INTR104 to utilize the square crossbars. I have attached a photo of this same kit along with the 31" Inno Fairing for Roof Racks # INA260 on a 2008 Subaru Forester a customer sent in that you can check out.
view full answer...
- Roof Rack And Canoe Carrier For A 2005 Subaru Legacy Outback WagonFor your 2005 Subaru Legacy Outback Wagon, I recommend using the: -Inno Square Crossbars # INB117, with the feet # INTR, and the fit kit # INTR104. This roof rack will easily and quickly attach your factory roof rails and provide an attachment point for a canoe carrier. For a canoe carrier, the Malone BigFoot Pro Canoe Carrier with Tie-Downs # MPG112MD is an excellent choice that will work with the mentioned Inno crossbars # INB117, and has a weight capacity of 165lbs, so it will be...
view full answer... - Can Older Thule Square Crossbars be Used for Roof Rack on 2020 Honda CR-VI do have a solution for you to have a roof rack on your 2020 Honda CR-V, but since Thule came out with their new Evo setup a lot of the Thule foot packs, like your Traverse, and fit kits have been discontinued. If you have the flush rails on the roof of your CR-V then you can use the Inno feet and fit kit that comes with their square bar roof rack kit: 46" Square Crossbars - # INB117 Inno Feet - # INXP Fit Kit - # IN98FR If you have a naked roof then you'll need a whole new roof rack...
view full answer... - How to Carry 3 Kayaks on a Chevrolet Equinox with Factory Roof RackI have a solution for you, but it would be tough to fit 3 kayaks on a J-style carrier and the Stacker on the factory roof rack of your 2008 Chevrolet Equinox. You may be able to use two of the Thule Stacker Kayak Carriers, # TH830, to carry all three kayaks on their side, but that will depend on the size of the kayaks. If the smaller kayak pretty thin and does not take must as much room on the crossbars, then this should work. The other option would be to purchase an aftermarket roof...
view full answer... - Roof Rack Recommendations for 2015 Mini Cooper S HardtopSince there are no hitch fits for your 2015 Mini Cooper S sedan hardtop I would go with a trunk mounted bike rack like the Hollywood Racks Over the Top part # HRF2 which is designed to fit vehicles with spoilers like yours and is a confirmed fit. A roof rack bike rack is a great option as well. This would probably be the better option since the bikes will be very secure on the roof and you'd still be able to get into the rear cargo area of your vehicle with the bikes installed. For that...
view full answer... - Recommended Roof Rack To Haul Kayaks On A 2019 Toyota Rav4For your 2019 Toyota RAV4 with factory flush rails I would go with Inno Square Crossbars as this will be the most affordable option. The complete kit that you need is Inno Square Bars # INB117, Feet # INXP, and Fit Kit # IN33FR. This system will attach to the flush rails and provide the necessary crossbars for the Malone SeaWing # MPG113MD and Malone DownLoader # MPG114MD to attach to. I attached a demonstration video for you to check out regarding this roof rack system.
view full answer... - Inno Roof Rack Recommendation for 2007 Subaru ForesterFor your 2007 Subaru Forester with raised side rails we have the Inno roof rack part numbers # INB117, # INTR, # INTR104 that INNO recommends as a fit. The bars that come with this, # INB117 are 46 inches long. If you wanted the longer 58 inch bars you'd need the part # INB147.
view full answer... - Low Profile Cargo Box and Roof Rack for my 2008 Lexus RX400hThe Inno Square Crossbars Roof Rack System which includes the Inno Square Crossbars Part # INB117 and the Inno Feet for Square Crossbars part # INFR will add at least 3" to the top of your side rails then adding the Inno Shadow 16 Rooftop Cargo Box part # INBRA1210BK which is 13 3/8" tall would put you extremely close at 16 3/8" tall. The bottom of the Shadow is recessed slightly where the bars fit which should get you down to about 15 3/8" and seems as if it would be a great combination...
view full answer... - Roof Rack and Kayak Carrying Option for 2009 Nissan AltimaInno offers an excellent, reasonably priced roof rack option for your Altima. For the square bar roof rack, you'd need the 46 inch long crossbars, part # INB117, the # INSUT roof rack feet and the # INK116 vehicle specific clamp kit. For a kayak carrier, use the Yakima JayLow # Y04073. It's a J-style but can also carry two kayaks at once. You'll need a second set of tie-downs for the other boat, part # Y04031. If you click the provided links, you can see some helpful FAQ articles about...
view full answer... - Roof Rack Crossbars for 2014 Toyota RAV4The Toyota RAV4 EV is an all-electric version of the RAV4 produced mostly for the California market from 2012 until September of 2014. This is not a hybrid, but a 100-percent electric vehicle. Our roof rack fits for the 2014 RAV4 include both this electric and the standard versions. You can use the linked page to see all roof racks for the car. At the top of the page simply click on the type of roof configuration you have - either raised factory side rails or a completely bare roof -...
view full answer... - Inno Roof Rack Recommendation for 2010 Nissan AltimaThe experience you described with the Sportrack is not uncommon and is why I never recommend them, for your 2010 Nissan Altima I would recommend the Inno Square bar roof rack part numbers # INB117, # INSUT, and # INK116 which we know fits really well and would not interfere in any way with your doors.
view full answer... - Inno Roof Rack and Canoe Carrier for 2013 Kia Sportage with Bare RoofRoof racks for your 2013 Kia Sportage that has a bare roof are displayed on the linked page and these include racks from Inno and others. For the Inno 54-inch square bar rack you referenced you will need to order parts # INB137, # INSUT and # INK701. On your vehicle this rack will install with a 28-inch bar spread; the rack weight capacity is 120-lbs. It is a good idea to check your Kia owner's manual to make sure your roof can handle the weight of the canoe. Of course, the canoe cannot...
view full answer... - Availability of Fit Kit for Thule 400 Roof Rack Legs on a 1998 Toyota CorollaYour Thule 400 support feet are old enough that there isn't a fit kit, however, The Inno Square Bar roof rack, parts # INB117, # INSUT, and # INK134 fit your 1998 Toyota Corolla and as long as your Thule crossbars are at least 46" long you can just use the feet and fit kit parts # INSUT and # INK134 to complete your roof rack system.
view full answer... - Most Affordable Roof Rack for 2015 Honda Civic Coupe for Cargo BagThe most affordable roof rack you can use to safely transport a cargo bag on your 2015 Honda Civic Coupe is with a square bar rack from Inno. It only consists of three parts, which are the following: - Inno Square Crossbars # INB137 - Inno Feet for Square Crossbars # INSUT - Custom Fit Kit # INK642 This set up will allow you to securely transport a cargo bag on the crossbars, ensuring your cargo remains safely atop your Civic and not the side of the road. For a budget-friendly cargo...
view full answer... - Roof Rack and Cargo Basket for a 2014 Ford Focus HatchbackRhino-Rack ROC 25 Roof Rack # RR37TR is for a Chevy Spark and will not fit your 2014 Ford Focus hatchback. Also, this is a single bar roof rack and not a set. For a completely, 2-bar roof rack that will fit your Focus you can use # RR78MR. If you are looking for a lower cost option then the most cost effective roof rack is from Inno using the following parts: Bars # INB137 Feet # INSUT Fit kit # INK528 With this roof rack installed you can use Thule basket # TH859XT though the mounting...
view full answer... - Will SportRack Roof Rack # SR1002 Fit a 2008 Hyundai ElantraSportRack semi-custom roof rack # SR1002 is a fit for the 2008 Hyundai Elantra sedan. No other parts are needed for this roof rack. Please note that since this is a semi-custom fit it will not have the best fit on the vehicle; not like a true custom fit roof rack would. A true custom fit rack will cost a little more but will fit better and install much easier. If you are interested the most economical custom rack is from Inno using the following parts: Crossbars # INB127 Feet # INSUT Fit...
view full answer... - Recommended 2-Bike Rack for 2012 MK6 Golf R ModelI have a couple of solutions for you, but unfortunately the center rear exhaust prevents the installation of a typical tow hitch on the VW Golf R model. One option is to go with a trunk mounted bike rack like the Thule Passage 2-Bike Rack - Trunk Mount - Adjustable Arms # TH910XT that has the anti-sway cradles to secure your bikes. I also recommend using the Swagman Deluxe Bike Frame Adapter Bar for Women's, Children's, and Alternative Frame Bikes # 64005 to create that top frame rail...
view full answer... - Can I Use Thule SquareBars From Another Vehicle On My 2017 Volkswagen Passat?You will need to use an Inno product for the old bars to fit. The new feet and bar style uses a channel to mount and the old ones wrap around the bar. Luckily the Inno bars are the same size so you can use the Inno Feet # INSUT this custom fit kit # INK591 This kit is designed to fit your 2017 Volkswagen Passat! I've included a video of the installation on a 2014 Passat. Pretty straight forward but be sure to watch the video before you attempt the install.
view full answer... - 2020 Accord 4dr Sedan Inno Rack Bar SpreadThe 2020 Honda Accord Roof Rack by Inno has a bar spread of 26 1/4". It consists of the following; Inno Square Crossbars - Steel - Black - 50" Long - Qty 2, part # INB127, the Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4, part # INSUT, and the Custom Fit Kit for INSU-K5 Roof Rack Feet K710, part # IN95FR. This roof rack has a weight limit of 120lbs. With the square crossbars you can attach any accessories that clamp to crossbars. This rack has locking torque knobs that...
view full answer... - Best Priced Roof Rack for 2018 Chevy Equinox with Naked RoofThe most economically priced roof rack we have for your 2018 Chevy Equinox that currently has a naked roof would be the Inno square bar roof rack part numbers # INB127, # INSUT, and # IN43FR. What's great about the Inno racks is they are higher in quality but at a fraction of the price compared to other brands of similar quality.
view full answer... - Roof Rack Recommendation for a 2003 Hyundai Accent 2-Door for Kayak and Bike CarriersThe Yakima Q Tower roof rack will fit your 2003 Hyundai Accent 2-door model and it will support a kayak carrier and a bike rack. Most kayak carriers require a minimum crossbar spread of 24 inches and this roof rack will have a crossbar spread of 28 inches once it is installed. The crossbar spread is the distance between the front and rear crossbar on center. The parts that you will need for the complete roof rack are listed below. Inno Square Crossbars - Steel - Black - 46" Long - Qty...
view full answer... - Roof Rack for 2010 Toyota Corolla Similar to Thule Square Bar RackThule stopped offering the fit kit you mentioned for your 2010 Toyota Corolla which means that while we have other great roof racks that can be installed on your vehicle we do not have any Thule options. For a rack that is very similar to the Thule square bar racks we have the Inno part # INB127, # INSUT, and # INK593 that fits your vehicle. This rack actually has the exact same crossbar dimensions as the Thule square bars but at a much better price.
view full answer... - Cost-Effective Roof Rack and 4 Snowboard Carrier Recommendation for a 2019 Hyundai SonataFor your application I recommend using the Rhino-Rack Carrier # RR576 because it can hold up to 4 boards and is one of the more cost-effective carriers that we have. I have attached a review video for you to check out. When it comes to the correct roof rack it depends on whether your 2019 Hyundai Sonata has a Panoramic glass roof or not. Here are the roof rack options I recommend: With Panoramic Sunroof 50" Long CoreBar Crossbars - # Y00421 BaseLine Towers - # Y28TR Fit Kits - # Y06110...
view full answer... - Roof Rack Recommendation for 2017 Acura MDX with a Naked RoofWe do have a roof rack that fits the naked roof on your 2017 Acura MDX, but the SportRack Semi-Custom Roof Rack # SR1008 will not fit. For your application I recommend the Inno Square Bar roof rack system which consists of the following: 58" Long Square Crossbars - # INB147 Inno Feet - # INSUT Custom Fit Kit - # INK656 This will actually fit much better than the SportRack roof rack system and we have an install video of the Inno on a 2016 Acura MDX that you can check out.
view full answer... - Can Inno Square Crossbars be Trimmed on a 2013 Dodge DurangoYes, the Inno Square Crossbars part # IN434 can be cut down to fit your exact specifications. If you will be installing these on your 2013 Dodge Durango then you will also need to use the Inno Feet part # INSUT and Custom Fit Kit part # INK611. Please keep in mind that most states require that the crossbars do not extend out past the side mirrors on the vehicle. The Inno Square Crossbar System is an excellent option for your Durango. It comes with a lifetime warranty, provides a tool...
view full answer... - Recommendation for Carrying 3 Bikes on 2015 Honda FitEven though all 3 bike cannot be carried on the hitch, there are a couple of ways to carry 3 bikes on your 2015 Honda Fit without having to put the 3rd bike in the car. One option is to go with a 3-bike trunk mount carrier, like the Thule Gateway XT3-Bike Rack # TH9007XT. I really like this bike rack because it offers anti-sway cradles to prevent bike-to-bike contact, grooved cradles to accommodate lines ran on the outside of your bike's frame, and narrowly spaced arms that are 12 inches...
view full answer... - Roof Rack Recommendation for Carrying a Kayak- 2019 Ford Escape with Bare RoofI'd highly recommend an Inno rack system for your vehicle. Inno provides a super-high quality product without the higher price tag seen with other brands that might be more universally well known. High value and top quality. Given the fact that you expressed an interest in transporting a kayak, using a through-bar system makes it easier for one person to get the kayak up on the vehicle roof. Pick up one end, place against the crossbar where it extends past the roof rack foot, then you...
view full answer... - Can a Roof Mount Cargo Bag be Used on a 2005 Mini Cooper S with No Roof RackSince you do not have anywhere to run the rear strap from a cargo bag designed for naked roofs, I do reocmmend installing a roof rack and using either a bag or cargo box attached to the rack. The most economical rack for your 2005 Mini Cooper is a Yakima rack made of the following parts: CrossBars # INB117 Short roof adapter # INJK Custom Fit Kit # INK118 Feet # INSUT With this rack installed you could then use a cargo bag or box secured to the crossbars. Given the distance you are traveling,...
view full answer... - Roof Rack Recommendation for a 2013 Toyota CamryThe Sportrack Semi Custom Rack part # SR1002 is a fit for your 2013 Toyota Camry, but since this is a semi-custom rack it wouldn't be my recommendation. Instead I would recommend a custom rack by Inno that consists of part numbers # INB127, # INSUT, and # INK872. Semi-custom racks are notorious for not fitting well. If you only plan on using the rack maybe once or twice total the Sportrack would do the trick. If the rack will see regular use I would strongly recommend going with the Inno.
view full answer... - Roof Rack Recommendation for 2016 Ford Fiesta SedanThe best value roof rack we have for your 2016 Ford Fiesta that has a naked roof is the Inno rack part numbers # INB127, # INSUT, and # INK872. This will fit MUCH better than the Sportrack you tried as it is a custom fit rack and what you tried is only semi-custom and is a design that would most likely at least partially transfer to a similar future vehicle. Then for a 2 kayak carrier the Thule Compass part # TH890000 fits this rack and would be an easy way to carry your kayaks. It's padded...
view full answer...
- Recommended Roof Rack for a 2008 Kia Sorento to Carry a KayakThe SportRack Semi-Custom Roof Rack # SR1098 will be able to carry your 45 lb. Kayak and will fit a 3' roof. However, I do not recommend the SportRack Semi-Custom Roof Rack for your 2008 Kia Sorento as a semi-custom roof rack will not fit your vehicle as well as a custom roof rack. For a load like a kayak we find that a custom fit rack will provide a much more secure foundation. If you have factory side rails that run front to back, I recommend the Inno Square Crossbars consisting of...
view full answer... - Recommended Kayak Carrier for 3 Kayaks on 2008 Toyota HighlanderI envy your choice of lakes for your kayaking, but I can relate to the convenience of nearby water since I have to go only 1/4-mile to hit the lake in my kayak! If your 2008 Toyota Highlander has a factory-installed roof rack with crossbars that run side-to-side then you can use the Thule Kayak Stacker # TH830. The Stacker handles up to 4 kayaks up to 10-feet in length and holds them on their sides. Please click on the video link provided. If you don't have a factory roof rack but do...
view full answer... - Roof Rack Recommendation for a 1995 Honda CivicFor your 1995 Honda Civic 3 door hatchback the Sportrack roof rack part numbers # SR1003 and # SR1116 is a confirmed fit. However, this is a semi-custom fit roof rack that doesn't always fit every vehicle perfectly since it's designed to fit as many vehicles as possible. A much better option would be the INNO part numbers # INB107, # INSUT, and # INJK, and # INK130. This is a custom fit rack that would fit much better.
view full answer...
- How Can I Fit Thule Square Crossbars on My 2015 Toyota Prius Hatchback with a Bare Roof? You are correct that Thule discontinued the Traverse Foot Pack 480. However, it is unclear from your question if you also meant that you had older square Thule crossbars. If you have older Thule square crossbars that do not have a channel opening in them, there is a solution for your 2015 Toyota Prius. That includes the following setup: - Inno Feet for Square Crossbars - Naked Roofs - Black # INSUT - Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet # INK865 Since the...
view full answer... - Will The Malone AirFlow2 Universal Roof Rack Part # MPG215 Fit A 2014 Nissan MuranoYes, the Malone AirFlow2 Universal Roof Rack part # MPG215 is a confirmed fit for a 2014 Nissan Murano with raised side rails. As long as you have the factory raised side rails that run front to back, this roof rack will work for you. If you do not have the raised factory side rails that run front to back, you will need to use a roof rack designed for naked roofs such as the Inno Square Crossbar Kit part # INB127, part # INSUT, and part # INK366. If you are interested in a roof mounted...
view full answer... - Roof Rack Option for 2010 Pontiac VibeSo it sounds like you are looking for a roof rack for your 2010 Pontiac Vibe where part of it is attached to the fixed mounting points and the other is a clip-on option. While we do have a nice rack option, there isn't a good option for that because of the types of roof racks available for this vehicle. The best available rack option is a from Inno and it uses bars that go past the rack's feet, and uses a fit kit to clamp on, which is made up of the following parts: - Inno Aero Crossbars...
view full answer... - Recommended Roof Rack Options For 2009 Toyota Matrix With Fixed Mounting PointsFor your 2009 Toyota Matrix the only style roof rack system is the clamp on style rather than bolting to fixed mounting points. I would recommned the Inno roof rack system with square bars that clamp securely to your roof. The # INB107 crossbars are mated with the # INSUT feet and # INK244 fit kit, and install easily. The square bars are heavy duty and work with most accessories. You might also consider the Inno # INXB108-2, with # INXS250 feet, and # INK244 fit kit for a roof rack with...
view full answer... - Roof Rack Recommendation for a 2001 Toyota RAV4The SportRack roof rack # SR1002 is listed as a fit for your 2001 Toyota RAV4 with naked roof but it does not use those fixed mounting points. It is actually a semi-custom roof rack and would not offer the best fit so I would not recommend it over a true custom fit option. The most cost-effective, true custom fit roof rack for your RAV4 is from Inno using bars # INB117, feet # INSUT, and fit kit # INK244. It does not use those mounting points on your roof either. This rack will be a much...
view full answer...
- What do Roof Rack Feet do for Inno Roof Rack on 2010 Pontiac Vibe With Naked RoofIt sounds like you are asking the purpose of the "feet" of the Inno roof rack that fits your 2010 Pontiac Vibe. What the feet do is act as a base for the crossbars, and an attachment point for the fit kit. So what you will do is attach the fit kit to the feet, with the fit kit being what allows the rack to clamp to your door sills; then the crossbars will attach to the feet. Essentially, the feet of a roof rack act as something of an anchor for the crossbars so you can mount them. The...
view full answer... - Will the Inno Feet for Square Crossbars Fit My 2009 Pontiac Vibe?I have a solution for you. Unfortunately, the Inno Feet for Square Crossbars # INXP will not fit your naked roof with fixed mounting points on your 2009 Pontiac Vibe. Although, I did confirm with Rhino-Rack that they do have crossbars that are compatible with your vehicle's rails. For the Rhino-Rack setup, you will need: - Inno Square Crossbars - Steel - Black - 42" Long - Qty 2 # INB107 - Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4 # INSUT - Custom Fit Kit for Inno XS200,...
view full answer... - Roof Rack Recommendation for a 2010 Toyota MatrixFor your 2010 Toyota Matrix I have a solution for you, but a rack from a 2014 Corolla would not be it. The best priced system that would work great is the Inno part # INXB85-2, # INXS200, and # INK244 which is a confirmed fit. This will give you an OEM looking roof rack as the bars of the system do not extend past the feet.
view full answer... - Recommended Crossbars for a 2003 Toyota RAV4Yes, for your 2003 Toyota RAV4 I'd recommend checking out the Inno Aero Crossbars # INXB115-2, with the Inno Through Feet for Aero Crossbars # INXS250, and the Custom Fit Kit # INK244. These crossbars measure 45" long, 3 1/8" wide, 1 1/8" tall, and have a maximum dynamic weight capacity of 165 lbs. This system is designed to be used with a naked roof, which is what I assume you have but If you have factory rails already then you'd want the Inno Aero Crossbars # INXB123-2 with the feet...
view full answer... - Will the Thule Rapid 400XT Foot Pack Work on a 2009 Toyota MatrixI do have an option for you but I spoke to my contact at Thule and they said that the Thule Rapid 400XT Foot Pack that you have cannot be reused on your 2009 Toyota Matrix because the fit kits are no longer available. Therefore, if you wanted to reuse your crossbars you would need both the Thule Rapid Traverse Roof-Rack Foot Pack part # TH480R and the Thule Roof-Rack Fit Kit for Traverse Foot Packs part # THKIT1512.
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Ashley K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.