bing tracking image
  1. Accessories and Parts
  2. Tekonsha
  3. Trailer Brake Controller
  4. Wiring Adapter
  5. Plugs into Brake Controller
  6. Vehicle Specific
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ford, Lincoln, Mercury
Tekonsha

Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ford, Lincoln, Mercury

Part Number: 3035-P
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$18.95
Retail:$36.98
You Save: 49%
Accessories and Parts

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Tekonsha Plugs into Brake Controller Accessories and Parts - 3035-P
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash. 1-800-940-8924 to order Tekonsha accessories and parts part number 3035-P or order online at etrailer.com. Free expert support on all Tekonsha products. Great prices and Fastest Shipping for Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ford, Lincoln, Mercury. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (1791)
  • Q & A (0)
  • Photos

Tekonsha Accessories and Parts - 3035-P

  • Trailer Brake Controller
  • Wiring Adapter
  • Plugs into Brake Controller
  • Tekonsha
  • Vehicle Specific

Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.


Features:

  • Wiring adapter eases installation of your electric brake controller
  • Custom connector end plugs into the built-in port beneath the dash of your vehicle
  • Other end plugs into the back of your electric brake controller
    • Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523)
    • Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510)
  • Limited 1-year warranty


Installation of Tekonsha Brake Controller Adapter

For most applications, the factory plug is located beneath the dash, near the center console. If you have a Ford full-size van, the harness is underneath and to the left of the steering column. The Ford Explorer and Mercury Mountaineer have 6-pin connectors behind the glove box on the passenger's side. On a Ford 2010 Flex, the connection point is under the front edge of the dash directly below the steering column. On a 2013 Ford Explorer, the connection point could be behind the driver's side kick panel. On a 2014 Ford Explorer, the brake controller port is located by the steering column.


To install your electric brake controller you need to connect the wiring of the controller to your vehicle. Certain manufacturers offer pre-wired options, typically known as tow packages, wherein these wires are run for you from the dash to the trailer connector on the back of your vehicle. Often, a brake controller wiring harness is included with your tow package. This harness plugs into a port beneath your dash and connects to the four wires of the brake controller. If, however, you have a brake controller with a plug in place of the four loose wires, you can use the Tekonsha adapter.


This adapter requires no hardwiring. It is designed to plug directly into your electric brake controller for the simplest installation possible. Because there are no wires to connect, installation is not permanent. You can unplug and remove your brake controller at any time and securely stow it away.



303500 Tekonsha Brake Control Wiring Adapter with 2 Plugs - Replaces Tekonsha 3035 and Tow Ready 20260

Installation Details 3035-P Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.9

1791 reviews
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.

by:

worked perfectly



by:

Made it very easy, and fast.



by:

Worked great, super easy install...



by:

really easy installation



by:

Easy to install!



by:
1999 Ford F-250 and F-350 Super Duty

Very simple and easy to install.



by:

Perfect! Installed easy as can be.



by:

Thanks!



by:

Easy installation



by:

Good Product, fast shipment



by:

Easy installed in minutes



by:

Made installation a snap!



by:

Makes install a snap! Plug and play!



by:

great service by etrailer! thanks much!



by:

Plug and play makes install a snap



by:
1997 Ford F-250 and F-350 Heavy Duty

Easy hookup. Great customer service.



by:

made hook up fast and easy



by:

Fits 100%



by:

Easy install and set-up, works great.



by:

Very fast and excellent service.



by:
2008 Ford F-150

RIGHT PARTS EASY INSTALL



by:

No problems



by:
1997 Ford F-150 and F-250 Light Duty

Too easy to install. Great quality.



by:

Plugged right up and worked perfectly!



by:

Worked Great made it easy


25
1791
Show More Reviews

See what our Experts say about this Tekonsha Accessories and Parts

  • Which Brake Controller Install Harness Fits 2022 Ford E-450 Cutaway
    For your 2022 Ford E-450 cutaway chassis the correct Tekonsha brake controller install harness is actually the part # 22292. This is why what you have doesn't look like it would work with the 3035-P.
    view full answer...
    Image 1 for
  • Below Bed 5th Wheel Installation Kit Needed For A 2000 Ford F-250
    Hey Judah, For below bed you would need to go with the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1108 and then use either the fixed base Companion # BWRVK3500 or slider base Companion # BWRVK3400-5W depending on whether you have a long bed or short bed. If your bed is less than 8' then you'll want to go with the slider base to gain some additional turning clearance when making tight turns. This setup would also allow you to tow gooseneck trailers but removing the hitch...
    view full answer...
  • Recommended 7-Way Trailer Wiring On 2007 Ford E-350 Super Duty Van
    If you don't already have a 4-way wiring harness, we need to start there to get your 7-way. For a 4-way, I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56020 which plugs in behind the tail lights of your 2007 E350. You will have to remove the tail light assemblies and interior trim paneling to access the factory connections. I've attached a video to help. Then you will use the Universal Installation Kit for Trailer Brake Controller - 7-Way...
    view full answer...
  • Brake Controller Wiring for Ford E-450 Motorhome
    If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item # 3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450 vehicles, the plug is located behind the storage compartment above the radio. Once you remove the storage compartment, you can plug in the adapter and run the cord behind your dash to the brake controller. I've attached several images showing where...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Is Reese Voyager and Tekonsha Voyager the Same Brake Controller
    They are the same controller as Reese and Tekonsha are made by the same company. The Tekonsha part # 39510 does not come with the vehicle specific install harness part # 3035-P which is custom fit for your 2003 Ford F-250/350.
    view full answer...
  • Tekonsha Voyager Brake Controller Not Activating Trailer Brakes When Brake Pedal Is Pressed
    Yes, we can help you test your brake controller and determine if the controller is bad or if there is a wiring issue that is causing the problem on your 2003 Ford F-250 pickup. Lets start with the easiest things first. Be sure that when you are testing the trailer brakes with the brake pedal that the vehicle is moving. The trailer brakes will not apply with the brake pedal if the vehicle is not moving because of the proportional sensor. The first thing I would check is the red wire that...
    view full answer...
  • Where is Brake Controller Install Port for 2018 Ford Explorer
    To install your Reese Pod brake controller in your 2018 Ford Explorer will require the install harness part # 3035-P which is a confirmed fit. If you check out the 9:55 mark of the install video I attached to this page you'll see where to find the port on your vehicle to plug the controller in. It is a bit hidden under the dash underneath the panels.
    view full answer...
    Image 1 for
  • Parts Needed To Install a 7-Way and Trailer Brake Controller On a 1996 Ford F-350 With Factory 4-Way
    Since you already have a factory 4-way flat on your 1996 Ford F-350 you will need the Adapter 4-Pole to 7-Pole # 37185. This will plug into your factory 4-way and the rest of the wiring will have to be spliced into your factory wiring as I do not see anyone makes wiring for your factory connectors. The Tekonsha Plug-In Wiring Adapter # 3035-P will allow you to plug into the 6 pin connector you found under the dash. Then you can connect the Tekonsha Prodigy P3 Trailer Brake Controller # 90195.
    view full answer...
  • Installing A Reese Brakeman Controller In A 202 Ford E250 With Factory 4-Flat
    Hey John, I can definitely help with that. The Reese brakeman controllers are compatible with the Tekonsha brand plug-and-play adapters. For your 2002 Ford E250 you can use the # 3035-P to plug directly in to the factory brake controller plug. You will also need item # 37185 to complete your wiring. The brake (blue) wire will need to be run from the brake controller back to the plug in the rear. The brake controller power and brake pedal wires are already run. A 12 volt hot lead from the...
    view full answer...
  • Brake Controller Recommendation for a 2008 Ford F-150 with Factory 4-Way
    To install a brake controller in your 2008 Ford F-150 you would be able to use the brake controller port under the dash and you will need to complete the wiring at the rear of your vehicle to the 7-way at the rear of the truck. For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the...
    view full answer...
    Image 1 for
  • Brake Controller Connector Location on a 2020 Ford Explorer
    If your 2020 Explorer is equipped with the factory 7-way trailer connector, it will have the brake controller connector under the dash. The connector is located under the dash, above and to the right of where the driver's right knee would be. The connector will be rectangular, and will be gray in color. If you use a Tekonsha brake controller like the Tekonsha Primus, part # TK90160, the # 3035-P wiring adapter is the correct harness. If the vehicle doesn't have the factory 7-way, the connector...
    view full answer...
  • Recommended Wiring for 1998 Ford F-150 to Add 7-Way to Factory 4-Way Trailer Connection
    For your 1998 Ford F-150 Extended Cab with factory 4-way flat, you need the Tekonsha Ford Replacement OEM Tow Package Wiring Harness, 7-Way # 118242. This will give you the two additional relays needed as well as the wiring harness. Then you will need a brake controller. I recommend the Tekonsha Prodigy P3 # 90195 as well as the wiring adapter # 3035-P. This will give you an easy to use proportional brake controller with easy to use presets as well as a nice LCD screen for diagnostics....
    view full answer...
  • Factory Brake Controller Harness Location on a 2013 Ford Explorer
    The harness for the 2013 Ford Explorer is located above and behind the hood release lever. There will be a 6-pin connector that mates with the one on the adapter at the end of the harness # 3035-P. For a brake controller i recommend the Tekonsha P2, # 90885, because it is one of our best selling controllers for its ease of use. I have included a link to the installation details for you to view.
    view full answer...
  • Brake Controller Wiring Harness Location on a 2013 Ford Explorer Limited
    On your 2013 Ford Explorer Limited, the factory brake control wiring harness should be located above and behind the hood release under the dash on the drivers side. To connect your P2 brake controller to the harness, you will need the Tekonsha Plug-In Wiring Adapter, # 3035-P. This adapter has one end that plugs into your P2 brake controller and a larger end that plugs into the 6 pin connector that should be located behind the glove box on the vehicles brake control harness. I have attached...
    view full answer...
  • Recommended Brake Controller for a 2018 Thor Ace Motorhome
    For your 2018 Thor Ace Motorhome, I recommend using the Curt Spectrum Trailer Brake Controller part # C51170. The reason for this is because this unit is composed of two main parts, the control box and the output knob. The control box gets mounted out of site and then the output knob will get installed up on your dash for easy use and a very aesthetically pleasing look. The color output of the knob also helps with ease of use. Since your motorhome is on a Ford F-53 chassis, you can use...
    view full answer...
  • How Would EZ Connector Magnetic 7-Way Trailer Connectors with Built-in Seal # 319-R7-02 Install
    If your 1994 Ford F-150 has a 7-way installed on it already the EZ Connector Magnetic 7-Way Trailer Connectors with Built-in Seal # 319-R7-02 will easily plug in line with it once you remove the 7-way from your truck's wiring and then plug this in place. Then on the trailer side you have to remove your current 7-way and then wire the trailer side connector in it's place.
    view full answer...
    Image 1 for
  • Recommended Brake Controller and Wiring Harness For 2005 Holiday Rambler Ambassador on F53 Chassis
    For your 2005 Holiday Rambler Ambassador motorhome, I recommend you use the Tekonsha Prodigy P3 Brake Controller # 90195. This controller utilizes a LCD screen that gives you easy to read and understand diagnostics and comes with simple presets to make set-up easy. It is proportional, so it will allow you to apply the trailer brakes at the same time and with the same amount of pressure so your trailer doesn't end up pushing or pulling your RV. It doesn't have the codes of most brake...
    view full answer...
  • Recommended Plug in Brake Controller Adapter for a 2016 Range Rover TD6
    Hey Patrick! I would love to give you a quick yes but the best I can do is maybe and then show you what you need to look for. There is conflicting information on Tekonsha's website that says your 2016 Range Rover TD6 has the brake controller adapter port but I can tell you exactly where to look to find it. I linked a diagram below that shows the wiring on your Range Rover. This will be at the base of the left side a-pillar or to the left of your left foot right before your driver's side...
    view full answer...
  • Why Is the Tekonsha Prodigy P2 Blowing a Fuse in My 2006 Ford Van when I Plug it in?
    Hello Bry, I am sorry the Prodigy P2 keeps popping a fuse, let's see if we can get you in good working order. You're dealing with a fuse that keeps blowing whenever you plug in your Tekonsha Prodigy P2 brake controller # 90885 in your 2006 Ford van (that was the vehicle in the fitguide). This usually points to a short somewhere in the wiring, most often with the black wire that supplies 12V power to the controller. If that wire is pinched or the insulation is damaged especially where...
    view full answer...
  • 2001 Ford F-150 Trailer Hitch Needed with a 700 lbs Tongue Weight and Fits with Spare Tire
    The Draw-Tite Trailer Hitch Receiver # 37130 is a Class IV trailer hitch with a 2" receiver opening that is confirmed to fit your 2001 Ford F-150 and will allow you to keep your full spare in it's current location. This has a 7,000 lbs Gross Towing Weight (GTW) rating and a 700 lbs Tongue Weight (TW) rating. When used in conjunction with a Weight Distribution (WD) system those ratings are bumped up to 12,000 lbs GTW and 1,200 lbs TW. I have attached the installation details for you to...
    view full answer...
  • What Vehicle Specific Pigtail do I Need for My Tekonsha P3 for My 2001 Ford F-350, Mounting Bracket?
    Hello Kip, Nice choice on brake controller, definitely my go to! For your 2001 Ford F-350 you will want the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ford, Lincoln, Mercury # 3035-P. For the bracket it comes in 2 pieces, the part that attaches the brake controller # 2178, and for the bracket that mounts to the vehicle # TK5906. Getting a second truck all set-up for easy swapping?
    view full answer...
  • Wiring Needed to Install 7-Way and Brake Controller on 2005 Ford E-350
    There is no reason you couldn't use the Universal Wiring Kit # ETBC7 that you referenced to install a fully functional 7-Way on your 2005 Ford E-350, but you may not need the entire kit depending on what the van is already equipped with. If the E-350 has the factory 4-Way installed at the rear, then the blue (brake output) wire is not already run like you mentioned. If you have the factory 4-Way though, the brake controller power supply along with the brake pedal wires ARE already run,...
    view full answer...
  • Brake Controller With Plug and Play Wiring Harness for 1999 Ford F-250
    Hi Tom; we do have a custom wiring harness if you want to install the Tekonsha BRAKE-EVN Trailer Brake Controller # TK63VR in your 1999 F-250. Assuming you have the factory 4-way or 7-way you can use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers # 3035-P.
    view full answer...
  • Parts Needed to Add 7-Way and Brake Controller to 2007 Ford F-150 with 4-Way
    If your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need the # 3035-P, the # 37185, and a brake controller. For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to set up. Follow the 4-way trailer connector wires from the trailer connector to the front...
    view full answer...
    Image 1 for Image 2 for


< Previous
123. . .45



Do you have a question about this Accessories and Part?


Info for this part was:

Employee Jackie C
Expert Research:
Jackie C
Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Lori W
Expert Research:
Lori W
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Andrew K
Video Edited:
Andrew K
Employee Jacob T
Video Edited:
Jacob T
Employee Andrew L
Video Edited:
Andrew L
Employee Kathleen M
Video Edited:
Kathleen M
Employee Mike H
Video Edited:
Mike H
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Lindsey S
Written by:
Lindsey S
Employee Joshua S
Video by:
Joshua S
Employee Zach D
Video by:
Zach D
Employee Jonathan Y
Video by:
Jonathan Y
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Michael B
Updated by:
Michael B
Employee Isabelle B
Updated by:
Isabelle B
Employee Lincoln B
Updated by:
Lincoln B
Employee Shane T
Test Fit:
Shane T
Employee Joe B
Test Fit:
Joe B
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee Conner L
Test Fit:
Conner L
Employee Jacob H
Test Fit:
Jacob H
Employee Ryan G
Test Fit:
Ryan G
Employee Jared G
Installed by:
Jared G

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<