Best Jeep Bumper Hitches

# 1

Curt 2" Trailer Hitch - Bumper Mount - 8-3/4" Bolt Pattern - 5,000 lbs GTW

38 reviews

Code: E-3S

Retail:$117.95

Our Price: $84.54

You Save: 28%

• view all Bumper Hitch
• 500 lbs TW
• 5000 lbs GTW

• 2 Inch Hitch
• Bolt-On
• CURT

More Information >      

by: BELDEN FIRE AND RESCUE10/21/2014

THE HITCH WILL BE ATTACHED TO OUR 550 FORD 4WD EMERGENCY TRUCK ( VOLUNTEER FIRE DEPARTMENT ) I WILL NEED TO DRILL 2 ADDITIONAL HOLES IN THE STEP BUMPER. I LIKED THE ENDS THAT YOU ATTACH THE SAFETY CHAINS. THE TRUCK WILL PULL OUR TRAILER WITH OUR TERREX ATV HAVING THE CORRECT HARDWARE IN THE BOX IS GREAT

Click to Enlarge

View More

View Less

by: 04/29/2021

Solid, quality product. The bolt threads were a bit "short" so I had to buy some big washers to make up the distance and allow the nuts to fully tighten. Also, I looked up the torque specs on those grade 8 bolts to get the proper torque rather than what the instructions said: "Make sure to tighten them really tight". Overall pleased.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

View More

View Less

Bumper Hitch Questions

• Trailer Hitch Needed To Tow a Bass Boat With a 2018 Chevrolet Colorado
  
• I think you meant to say that your 2018 Chevrolet Colorado has a towing capacity of 3,500 and are wanting to make sure a trailer hitch rated for 5,000 lbs could be used. If that is the case then yes but you will always need to abide by the weakest rated component which is your vehicle. Therefore, you can tow your bass boat trailer no matter what trailer hitch you are using assuming the trailer is under 3,500 lbs which is what you said your vehicle's towing capacity was. Please...
  view full answer...


• How To Determine Towing Capacity of an RV Bumper that is 4 Inch Square 1/8 inch Thick Steel
  
• The best way to determine what the towing capacity of the bumper on your RV would be to contact the manufacturer of your RV and ask what the bumper gross towing weight capacity is. I attached installation instructions for the Curt 2 inch Bumper Hitch # E-3S for you to check out also.
  view full answer...


• Determining if Curt 2" Bumper Mount Hitch Will Fit 2001 Dodge Dakota
  
• The Curt 2" Trailer Hitch # E-3S that you referenced is more of a universal application so you will just want to check the existing bolt holes on your Dodge Dakota's step bumper to see if they match the mounting holes on this hitch. If the holes on your truck are spaced apart by 8-3/4 inches (on center) then the hitch will work perfectly as a simple bolt-on application. If you find that the holes don't match up then the hitch can still be installed but you will need to drill...
  view full answer...


• Will the Curt 2 Inch Hitch # E-3S Fit on a 1991 Ford Explorer XLT
  
• We have several trailer hitches designed for the 1991 Ford Explorer. I have posted a link to all of these hitches below. If your 1999 Ford F-150 is equipped with a step bumper, part # E-3S has a 8-3/4 inch, center to center, span between mounting holes. Check your bumper to see if it has two holes that are 8-3/4 inches apart. These are universal fit items so they do not fit specific vehicles. Some items you may need to complete a Class III hitch setup are listed below. Wiring...
  view full answer...


• Hitch Recommendation for a 2005 Mazda 3
  
• For your 2005 Mazda 3 you would want a Draw-Tite # 24816. This hitch is specifically designed to work on your vehicle, whereas the Curt Hitch # E-3S is a universal hitch that is designed to work on the bumpers of trucks and because of that would not work for. Check out the installation video and installation instructions I attached for this product also. This hitch comes with a drawbar as well as a pin and clip, but you may also be interested in the following products to...
  view full answer...


• Does Curt Bumper Mount Trailer Hitch Fit 2006 Toyota Tundra
  
• Curt Bumper Hitch, part # E-3S, is made to attach to a truck step bumper. It is a universal fit design so it is not listed for a specific vehicle. The mounting holes are 8-1/2 inches center to center between the holes. Since your 2006 Toyota Tundra step bumper has mounting holes that are 7-3/4 inch apart center you can still use the hitch but you would have to drill new holes. I am including a picture that will show the measurements for the Curt hitch. The weight capacity...
  view full answer...


• Will Curt 2" Bumper Mount Trailer Hitch # E-3S Fit 2000 Ford Ranger
  
• The Curt 2" Bumper Mount Trailer Hitch # E-3S that you referenced offers a pretty universal design, but the only way to verify a fit with existing holes on the bumper of your 2000 Ford Ranger will be to take a look and see if the pattern matches what's on the mounting plate for this hitch. The two smaller bolt holes measure 6" apart on center while the two larger holes are spaced apart by 8-3/4". I have attached an image to assist. You will just want to measure the holes on...
  view full answer...


• Will Curt Bumper Mount Trailer Hitch # E-3S Fit a 2007 Toyota Tacoma Bumper
  
• The Curt Bumper Hitch, part # E-3S, is made to attach to a truck step bumper. It is a universal fit design so it is not listed for a specific vehicle. The mounting holes are 8-1/2 inches center to center between the holes. If your 2007 Toyota Tacoma has a step bumper and has mounting holes with the 8-1/2 inch dimension then it will bolt to your bumper. If you do not have holes that will line up with the hitch then you can still use the hitch but you would have to drill new...
  view full answer...


• Fit of Curt 2 Inch Bumper Hitch # E-3S on 2014 Tacoma Double Cab
  
• The Curt bumper hitch you referenced, part # E-3S is a multi-fit application that will fit many different vehicles. The hitch is compatible with a standard step bumper, so if your Tacoma has that type of bumper it should work. I have provided a photo showing the bolt hole spacing of the hitch that you can compare to your bumper. The hitch has a 5000 lb towing/500 lb tongue weight capacity that will be limited by the capacity of the truck or the bumper itself if it is lower.
  view full answer...


• Willl The Curt Bumper Hitch, # E-3S, Fit On A 2008 Ford F150 Crew Cab
  
• The Curt Bumper Hitch, # E-3S, is made to attach to a truck step bumper. It is a universal fit design so it is not listed for a specific vehicle. The mounting holes are 8-1/2 inches center to center between the holes. If your 2008 Ford F150 Crew Cab has a step bumper and has mounting holes with the 8-1/2 inch dimension then it will bolt to your bumper. If you do not have holes that will line up with the hitch then you can still use the hitch but you would have to drill new...
  view full answer...


• Will the Step Bumper Trailer Hitch # E-3S Fit a 1994 Jeep Cherokee Sport
  
• Part # E-3S has a 8-3/4 inch, center to center, span between mounting holes. Check your bumper to see if it has two holes that are 8-3/4 inches apart. These are universal fit items so they do not fit specific vehicles. If you find that the # E-3S, bumper hitch will not work on your Cherokee we have several frame nount hitches that will work (see link). I would recommend the Curt Class III Trailer Hitch, item # 13084, for your vehicle. The Class III trailer hitch provides more...
  view full answer...


• Curt 2 Trailer Hitch - Bumper Mount - 8-3/4 Bolt Pattern - 5,000 lbs GTW
  
• I do have a solution for you, however the Curt 2 Inch Trailer Hitch - Bumper Mount # E-3S referenced in your question is designed to fit certain truck rear bumpers and will not work on your 2006 Saturn Vue. For your 2006 Saturn Vue, I instead recommend the Curt Trailer Hitch Receiver # 15391. This Class III hitch is confirmed to fit this vehicle and will use existing holes in the vehicle's frame for a no-drill installation. This will provide you with a 2 inch receiver opening...
  view full answer...


• Could Curt Bumper Mounted Hitch # E-3S Fit 2003 Ford F-150
  
• To see if the # E-3S would fit the mounting holes of your 2003 Ford F-150 you'd need to compare the dimensions you see in the attached picture with what you have on your truck. This is a universal fit hitch solution so we don't have specific fit info for it on vehicles. Best option would be a frame mounted hitch like the Draw Tite part # 37130 which we can guarantee is a fit and also will have much higher towing capacities.
  view full answer...


• Trailer Hitch Fit for 1999 Ford Explorer
  
• The bumper mounted Curt Trailer Hitch # E-3S is not a vehicle-specific hitch and is designed to install on vehicles with step bumpers that have mounting holes the same as in the accompanying photo. If your Explorer does not have those mounting dimensions there are trailer hitches that will fit. I recommend checking out the Draw-Tite # 75096 because it is a bolt-on installation that does not require drilling into your Explorer's frame and because of Draw-Tite's strong reputation...
  view full answer...


• Will Curt E-3S Step Bumper Receiver Hitch fit a 2008 Mazda B2300 Pickup
  
• The Curt E-3S bumper hitch is a universal design to fit standard step bumpers. If your B Series has a standard step bumper it should fit. We have several frame mounted hitches that bolt directly to the frame of the truck and are custom fit to the 2008 Mazda B Series. I have added a link to them below.
  view full answer...


• Trailer Hitch Recommendation for a 2002 GMC Sierra 1500 with Factory Step Bumper
  
• To determine if the Curt bumper mount trailer hitch # C19031 will fit your 2002 GMC Sierra 1500 with factory bumper you have to look to see what the holes spacing is on the bumper. The hitch will fit if the bolt holes are 10-1/2 inches apart on center. If the hole spacing won't work with your truck I recommend a frame mounted hitch, # 13322, which will also be a stronger hitch since it attaches to the truck frame. It is rated for 600 pounds tongue weight and 6,000 pounds gross...
  view full answer...


• Trailer Hitch Recommendation fora 1999 Ford Explorer XLT 4-Door with Full Size Spare Tire
  
• The Curt bumper mount hitch # E-3S is the only bumper mount hitch we currently offer. Since it is not going to work you are left with a custom fit frame mount trailer hitch. The Curt hitch # 13540 is the most cost effective option that allows the full size spare to remain with the hitch installed. I have included a link to the installation instructions for you to view so you can determine if the installation is something you are willing to perform yourself. This hitch has...
  view full answer...


• Will Curt Bumper Hitch Part E-3S Fit a 1999 Ford F-150
  
• If your 1999 Ford F-150 is equipped with a step bumper, then yes this hitch can be used. You may need to drill new holes factory holes do not line up. You can also use a standard frame hitch like part # 75065 or part # 13355.
  view full answer...


• Dimensions of the Curt Bumper Mount Trailer Hitch # E-3S
  
• I pulled the Curt Bumper Mount Hitch, # E-3S, from the warehouse and made a video showing you the measurements that you were asking for. The wider holes, closest to the receiver opening, are 1-1/4 inches wide and accept a 3/4 inch diameter bolt. The bolt holes measure 10-3/4 inches at their widest points and 7-1/4 inches at their closest point. With the bolts set at the widest point, they measure 9 inches apart on center and 8 inches apart at the closest point.
  view full answer...


• Can the Bumper Mounted Trailer Hitch be Installed Under the Step Bumper of a 2000 Ford Ranger
  
• I spoke with my contact at Curt, the manufacturer, about the Bumper Mounted Hitch, # E-3S, and the compatibility with your 2000 Ford Ranger. He stated that the total width, side to side, is just under 14 inches. From the front of the receiver opening to the back of the plate is 6 inches. The plate itself measures 4 inches front to back. The hitch can be mounted under the step bumper if you have mounting holes that measure 8-3/4 inches from center to center on your bumper.
  view full answer...