Slunky RV Sewer - Hose Support System - S2000 Review

content loading



Customers compare S2000 to these similar products




Products Featured in this Video



Review of Slunky Plumbing S2000


Today we're going to be taking a look at the Slunky RV Sewer Hose Support System from Valterra. This is going to cradle your RV sewer hose off the ground to prevent damage. It's got a nice sloped design, downward design, that's really going to help prevent clogging inside the hose. It's going to offer elevation, which is going to protect the hose from damaging elements that can potentially be on the ground, and it's got a nice flexible design. That's going to allow the hose to be positioned on the support system, really around any obstacle or anything that gets in the way. The entire unit just extends out, and can be positioned around any obstacle that you may have. It's also got the nice, deep pockets.

That's going to hold the hose firmly in place on the system. It's a quick and easy setup. It's going to have the rigid bottoms here on the feet, which is going to offer a lot of grip to the ground, making sure that it doesn't shift or slide around once it's in place. It's made from a durable black plastic construction, and as you can see, it has a nice collapsible design for easy storage, and it's going to come with a self-fastening strap to keep it all together. You're also going to get these individual tie-down straps.

These are included to secure the hose to the support system. Each individual support is going to have a keeper on each end, so what you can do is you take one end of that, loop it through one side, bring it over the hose and loop it through the other side, and that's going to securely hold the hose at numerous points on the support system to the actual support, making sure it doesn't fall off or anything like that. Those little tie-down straps are included as well. This is designed for sewer hoses up to 3 inches in diameter. It's going to give us an extended length of up to 20 feet long. When it comes to the height of the unit, measuring this point here, overall height, we're looking at about 7 1/2 inches on the back side. This is going to be the end that'll be closest to the RV, we're looking at about 10 inches of height, and then the overall width from edge to edge, we're looking at a measurement of about 8 inches wide.

It's really easy to move it to the stowed position, so once you're done with it, just lay your strap down, and then you can place the support system over top, and all you got to do is bring the strap up, loop it through itself, and then secure it, and that's all there is to it. Then everything's nice and kept together. That's going to do it for today's look at the Valterra Slunky RV Sewer Hose Support System, measuring 20 feet long.


Questions and Comments about this Video

add comment

Info for this part was:

Video by:
Dustin K
Installed by:
Cole B
Installed by:
Hayden R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.