Feature Breakdown: Rhino-Rack Vortex Roof Rack Video

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

To remove the hinge pin you'll need to remove the Phillips screw from each side of the cover. Then the lift arm supports can be disconnected from the lid, and the new lid can be put in place. You just want to make sure to replace all the hardware…

I did see the review saying they used spacers for the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers - 71" Long #RRVA180B-RRRLT600. This system will be approximately 4-1/4" to the top of the…

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

There is actually a carrier specifically for your application. Well, not vaulting poles, but 6 inch PVC pipe. Take a look at Conduit Carrier Kit # RP7054900. It fits 6 inch diameter PVC schedule 40 or 80 and this set up can be locked using a padlock…

I pulled this from our warehouse and it was a lot smaller than I originally thought. In the attached picture I have all of the dimensions you requested noted. To give you a quick overview of the dimensions: Thickness - .16 inches Long Sides - .993…

The Replacement Track Nut for Thule #853-2106 uses a M6 x 17mm bolt like the Replacement M6 x 17 mm Bolt #924-0617-15. I have also included a diagram that has additional measurements outlined. The Replacement Track Nut for Thule #853-2106 is a…

The easiest to fit track nuts for the channels of your RetraxPro XR will be the track nuts part #853-2106 due to the angle of the "square" so that would be what I would go with.

If your roof vent lid won't open, even when using the manual lift knob, then the gears of the lift operator are most likely stripped out and the lift operator will need to be replaced. The Replacement Operator Mechanism #MA10-20281K-1AF is…

The 71" Rhino-Rack Vortex Crossbars for Retrax XR Tonneau Covers item #RRVA180B-RRRLT600 are the correct set for your 2022 Ram 3500. These are made for full size trucks and fit in the rails of the Retrax PRO XR. These crossbars are exactly…

The "C" channel on the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers #RRVA180B-RRRLT600 is essentially the same thing as the T-slots you see from other manufactures, it is just what Rhino-Rack…

For your Sears Sport 20-SV, you can use the Replacement Lock Core and Key for SportRack Explorer Cargo Box #SR03807 for a replacement lock and key. To mount this cargo carrier to your Honda, you're going to need a set of crossbars like #TH711420…