Thinline LED Trailer Tail Light Feature Review Video

There are a few different replacement caps for the various Titan actuators. Replacement #T4830601 that you referenced fits model 10 and 20 actuators. Since it doesn't fit you must have one of the others. Cap #T4480701 is for model 60 and Aero…

The closest taillight solution we have to what you are looking for would be the part #STL264RCB which is a stop/turn/tail light that is an LED strip that measures 20-1/2 inches in length.

I have an alternative solution for you, but I spoke with my contact at Bulldog and he informed me that there isn't really a great way to lock the Bulldog Gooseneck Coupler Head #BDGN240200. What you will need to do is jack the trailer this…

With the Fulton weld-on gooseneck hitch coupler GN24, part #BDGN240200, you can use Blaylock coupler lock #BLTL-50 along with padlock #ML40D.

If your trailer has separate turn signals from the brake lights and you want them to remain that way, you will need to use a special converter. On the trailer side, behind the 7-Way, you will attach the Vehicle to Vehicle Taillight Converter,…

Hello Leo, I checked with Optronics and there is no record of a STL69RC1PG light. What we do offer that you may have been referring to is the Thinline LED Trailer Tail Light #STL69RCB. This is a 15" Long x 1-3/8" tall tail light with stop,…

Hey Dave, what you gave me is enough info to get you replacement bearings. The grease seal 471750 matches the part #TMK48ZR. For a Timken replacement for the L44610 part number you'd need #TMK63VR. Then for a bearing for the L44649 you'd want…

This particular lamp is meant to be used in pairs, one on each side of the rear of the trailer. The red wire on the drivers side lamp is meant to connect to the yellow wire from the trailer connector, and on the passenger side lamp the red wire…

I went out to the warehouse and pulled part #SS03 and took some measurements for you. (See image). The steps are 9-1/2 x 18-1/2 x 9-1/4 when folded. According to my contact at CR Brophy, the actual weight of the #SS03 scissor steps is 29 lbs.

The Optronics Streamline LED Trailer Tail Light #STL79RB is going to be the closest light we have to what was put on by Lance for your 2185 travel trailer. This light is 17" long, 1-3/8" wide and 1" tall. The mounting holes are spread…

Thanks for the picture of what's on your trailer. It certainly looks like the part #STL87RCB that you referenced but might be from a different manufacturer. That said if the distance between the mounting holes on what you have is 14-1/2 inches…

Normally an intermittent working motorized jack like the Lippert Components Powered Tongue Jack #LC285318 is due to a faulty ground or a short circuit in the power wire. I recommend checking your ground connections, normally in the mount of the jack…