bing tracking image

Optronics Off Road Lights - Light Bar - UCL21CB Review

content loading

Customers compare UCL21CB to these similar products

Products Featured in this Video

Review of Optronics Off Road Lights UCL21CB

Speaker 1: Today, we're taking a look at the Optronics Off Road LED Light Bar. This LED light bar delivers a bright mix beam, which is ideal for off road driving. And what we mean by mix beam is this has a combination of flood and spot beam. So, the flood beam is great for seeing out in front of you and off to both sides. And spot beams are ideal for seeing at a longer distance.The unit features high quality light output from two rows of 12 LEDs. That's 24 LEDs total.

The LEDs have a 200,000 hour LED lifespan, and Optronics actually puts a lifetime warranty on their LEDs. On the back of the unit, it's got a really neat unique design so this is a channel fin design on the housing. This lets heat quickly dissipate, which optimizes the LED performance.When it comes to the construction, it's a durable water-resistant construction, and it's a lightweight design. So, the unit features a black power-coated die cast aluminum housing, completely rustproof. Has a nice, tough, polycarbonate lens that's impact resistant, and it features an IP65 rating for protection against dust and moisture.

So, it's gonna keep those elements out.It is compatible with 12 volt DC and 24 volt DC systems, and it's a pretty simple installation. It does come with these universal mounting feet, provides a really nice sturdy base. You can also loosen up that hardware, and rotate the bar, or the feet to get the bar at the angle you need for your application. Comes with rubber pads that can go under the feet which helps prevent scratches to the mounting surface. And then it comes with all the necessary mounting hardware as well as the Allen key needed to get everything tightened down.When it comes to the wiring, it is protected by a nice thick jacket.

16 gauge wiring. You have your red wire, which is for power; black is for ground. The maximum measurement of the overall dimensions, and so I measured from the outside edge of one foot to the same point on the other side, and the overall length measurement for the unit measures about 16 and a half inches. Just measuring the light bar, edge to edge, it's about 13 and, it's about 13 and a quarter to 13 and five 16th of an inch.When it comes to the overall depths, that's from the very front to the very back, that gave us a depth of three and a half inches. And the overall height, with it set at this angle, bottom to top was four and seven eighths of an inch tall.I do wanna go ahead and hook it up to our power source, that way you can see what it looks like with some power running to it, and we'll also be able to turn off our overhead lights so you can see it in a low-light setting.

That's a really bright light. Again, you can see the difference from the outside lights to the inside lights, so that's the difference between the flood and the spot.When it comes to the effective lumen output, we're looking at 2700 lumens. Overall lumen output is 5000 lumens. Again the light bar contains a total of 24 LEDs, or 24 diodes, and the wattage is 72 watts. That's three watts per LED. Because of the power draw at 12.8 volts, we're looking at four amps. And at 24 volts, that's 1.8 amps. And again, Optronics puts that nice lifetime warranty on their LEDs.That's gonna do it for today's look at the Optronics Off Road LED Light Bar.

Questions and Comments about this Video

Ralph P.

Do I need to use a relay cooperate this light bar from a toggle switch

Etrailer Expert
Reply from Jon G.

We used the kit # MM510 to install this which includes a relay and a fuse to help it all work properly. I do recommend using this because it will help to protect your lighting.

Info for this part was:

Employee Jacob T
Video Edited:
Jacob T
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B
Employee Zach D
Video by:
Zach D

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.