Replacement Light Bulb # 1157 Spec Review Video

Yes, the Dexter E-Z Lube Axles still require cleaning and repacking of the bearings every 12 months or 12,000 miles. The zerk fittings on the end of the spindle are to add new grease in between maintenance intervals but they are not designed to…

I do have options for you but there would be no way for me to know what type of light bulbs your trailer lights use. For trailer lights there are generally two types which are bayonet or push-in. Most taillights use a 1156 or 1157 bulb like part…

If you have the Wesbar Submersible Low Profile Trailer Tail Lights #403026 and #403076 on your trailer, which the replacement lens #102641 fits, then the correct replacement bulb is the 1157 part #A1157B on our site. If you would like to replace them…

For an 1157 bulb like the #A1157B, in order to remove the old one you'll want to gently push down on the bulb while twisting the bulb 1/4 turn counterclockwise. You should then be able to pull the bulb from the socket. When replacing the bulb,…

In general, yes, most incandescent bulbs can be swapped out for an LED. In order to do this you need to know the bulb type such as 1157. That said, when replacing incandescents with LEDs you must use the same color bulb as the lens in order for the…

The Light Bulbs #A1157B & #A194B are replaceable on your Wesbar Tail Lights 403026. The part #102641 is the number for the lens while the 102640 is for the inner assembly which is only available with the entire tail light at this time.

Ken, since the Wesbar 102639 is no longer available, you will need to replace both lights with the Optronics LED Combination Trailer Tail Lights #TLL160RK. These lights measure 8-1/16" long x 2-7/8" tall x 2-13/16" deep, has a built in…

Yes, you should be able to use any 1157 bulb, such as #A1157B. So long as it is an 1157 bulb it will fit the socket and light up properly.

Since you said you want to re-wire your entire trailer I recommend the Optronics Submersible Trailer Light Kit, part #TL5RK. This kit comes with 2 stud-mount lights, 2 amber side marker and clearance lights, a license plate bracket, and a 25 ft…

Typically 4-way wiring consists of 18 and 16 gauge wires. For a 4-way that has all 16 gauge wire you would want the Wesbar 4-Pole Flat Connector #W787264. The part #HM38138 uses 18 gauge for all wires but the white that uses 16 gauge.

The older generations of the Wesbar submersible low-profile lights came with sealed light bulb capsules that are not replaceable. If your capsule is sealed, then your best option is to replace the lights with new lights like part #403026 and #403076.…

Some Wesbar lights have a the sealed type of capsule, and they are not meant to be opened. Instead, you would need to replace the whole capsule. The good news is that Wesbar offers replacements, depending on the model number, that can be easily…