Customers compare 103608 to these similar products
Products Featured in this Video
Today we're going to take a look at the MB Sturgis Sturgi-Flow propane cylinder connector kit. This kit will connect small portable appliances to existing or auxiliary LP gas cylinders without interrupting the supply of gas so it's allowing for longer use of your propane appliance. This includes the Sturgi-Flow T-fitting. On this T-fitting it has the POL tank connector on this side. Over here is… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
If your grill was designed to run off of unregulated propane pressure or has its own regulator you could use the part #103608. This will give you both the unregulated pressure and the hose needed for your propane stoves.
view full answer...You would still be able to use a tee like you're wanting to but you'll have to make a few modifications in order to fit the regulator in place again. The POL fitting #204037-MBS on tees like part #103606 can be removed and you can install a…
view full answer...Your Toy Hauler would've been prewired for a Furrion Vision S camera system like #FCE48TASL-05. The rear camera would install at the back of the hauler above the rear door just as you describe, with the other 2 installing on each side of the toy…
view full answer...The Pro Series Round A-Frame Jack #PSRV20000103 referenced in your question has an outer tube diameter of 2-1/4 inches. The inner tube has a diameter of 2 inches. This A-frame jack features a 9 inch retracted height and measures 13 inches from the…
view full answer...The Timbren Suspension Enhancement System #TFR250SDJ you were looking at for your 2022 Ford F-250 measure in at 6-7/8" tall as shown in the included diagram. This kit provides 8,600lbs of load leveling support to your rear suspension as you…
view full answer...You can use the MB Sturgis #103608 as a tee and hose for your bbq if you have a POL tank. If you have a travel trailer style tank then you can use #CAM59143 instead. This will allow your bbq to have unregulated pressure so it can use its own…
view full answer...For your RV propane system to be filled by an external tank I recommend the MB Sturgis Sturgi-Stay T-Fitting w/ Hose for POL Valve - 1/4" FIF and Disposable Cylinder Port #103609-MBS. This T-fitting will connect to your RV tank prior to any…
view full answer...Thank you for all of the details on your situation! The fitting that you need to connect your Camco Propane Supply Hose #CAM59053 to the regulator, like part #CAM59005 (without one of the fittings), is the Camco #CAM59953. This has a 1/4" Male…
view full answer...You would want to mount the Changeover part #CAM59005 vertically as that is how they are normally installed. Basically the two fittings that are gold in color will end up between the bottles and the other fitting on the portion of the product with…
view full answer...Sounds like you are looking for a propane tee and extension hose for your 1991 Palomino Pop-Up. Depending on the style of connector you need for your 1lb tank we have a few different tees and tee with hose combos that may work for you. The Camco…
view full answer...I would love to help but none of our propane hoses come equipped with a 1/4" male inverted flare fitting. The closest thing we have to what you are looking for is the MB Sturgis Propane Hose Assembly part #100040-48-MBS which is a 48" long…
view full answer...Yes, you can run a "T" off of the Camco Automatic Changeover 2-Stage Propane Regulator #CAM59005 for 2 different appliances. You will just need to make sure that the "T" is compatible with the 3/8" NPT female fitting on the…
view full answer...