K Source Custom Towing Mirrors - Snap-On Mirror - KS80800 Review

content loading



Customers compare KS80800 to these similar products




Products Featured in this Video



Review of K Source Custom Towing Mirrors KS80800


Today we're going to review part number KS80800. These are the K-Source Custom Towing Mirrors. These are the snap-on design. These are custom fit. They are designed to fit the 1999 to 2007 Chevrolet and GMC vehicles. What I would recommend is to go to our website and on the product page for this part number, at the very bottom of the page it will show the years and models of vehicles that these will fit on and it will also show a pictures of the mirrors they are designed to fit on. These mirrors will give you an extended field of vision so that you can easily pass and change lanes while towing and it gives you a nice customized secure fit over your existing mirror and it's an inexpensive alternative to buying and installing a replacement OEM towing mirror. These are very easy to use. You don't have to use any tools or any extra hardware.

Basically they will just snap on. They've got snaps right up here at the top and then a snap at the bottom. Basically when you install these, you just put the top snaps onto the top of the mirror, push the bottom down and push it on enough to where it will lock into place right here. If you also notice, they do put this protective tape right in here on both mirrors and that'll help protect it from doing any scratching or damaging to your factory mirrors. They are made to be easily put on and taken off. If you take them off, you just push down right here on these tabs and that will pop the mirror right off. If you need to pull your vehicle into the garage or if you're fitting into a tight parking spot and you don't need the mirrors extended out, you can just push down and they'll pop right off. Also once you get these installed, if you do get any vibration in the mirror itself, the mirror face, there's a little hole here with a screw that you can access and if you tighten that screw behind the mirror face, it'll reduce any of that vibration of the mirror face. These are a factory-style designed mirror.

They are in a black plastic OEM design. There's no unsightly straps or annoying vibration like you'll get with some of the strap-on models and these mirrors, once they are put on, will not interfere with your adjustments to the factory mirror. This part number does include these two pieces, the driver's side and the passenger side. They are both included. It also comes with a nice set of installation instructions. It shows you how to put them on and how to adjust that screw. I will give you a dimension on this.

The overall length of these is going to be right at about 17-1/2 inches. The dimension of the mirror itself is going to be right at about 4-3/4 inches wide and right about 6 inches high. Again, just to show you what you want to do is put this up to your mirror. Clip on the two top clips and then push the bottom in until it clips into the very bottom right there. You'd be ready to go. Simple installation and removal. That should do it for the review.

One note I do want to mention I almost forgot is, these do not fit on the OEM extendable mirrors, the OEM full-chrome mirrors or any of the telescoping mirrors. That should do it for the review on part number KS80800, a K-Source Custom Towing Mirrors in the snap-on design. .


Questions and Comments about this Video

add comment

Info for this part was:

Video Edited:
Zack K
Test Fit:
Patrick B
Installed by:
Jeff D
Video by:
Joshua S
Test Fit:
Rick A
Video by:
Patrick B
Video Edited:
Andrew L
Test Fit:
Shane T
Video Edited:
Sue W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.