bing tracking image

DeeZee ATV-UTV Toolbox - Utility Chest Toolbox - DZM207 Review

content loading

Customers compare DZM207 to these similar products

Products Featured in this Video

Review of DeeZee Toolbox DZM207

Speaker 1: Today, we're taking a look at the DeeZee specialty series ATV toolbox. This is the rustproof, bright tread aluminum box, so it's the rustproof, bright tread aluminum construction. As you can see, it's black in color. That's a black powder coated finishing on the aluminum construction, so you don't have to worry about rust or corrosion. It's very strong, very durable. This is a rectangular utility chest.

It's ideal for storage on the back of your ATV.It's got the nice handle right here. This is a locking stainless steel paddle handle with the guide plate, so it provides security for your belongings. Two keys are included. Move it to a lock position. It keeps that from being operable.

Move it to unlocked position, open it up. Internally, it has the single gas shock. This provides smooth, controlled lifting and lowering of the lid. Around the perimeter here of the lid, we have a foam gasket, so that creates a nice, weathertight seal when the box is closed to keep moisture, dirt, and grime out of the interior.It really does offer secure, weather-resistant storage for your ATV. Nice, strong, durable design.

We're looking at a one piece front, back, and bottom, and then we have the welded-on ends. So maximum strength and durability. Here on the back, we have the nice piano hinge that runs the full length of the box, minimizing wear. And it does come with some foam gaskets for the installation, and I think I have those inside the box here. So it does come with two strips of adhesive foam.

You can use those as gaskets when mounting this on the back rack of your ATV to prevent metal to metal contact.Pretty simple installation. The toolbox mounts to the back of your ATV using the included hardware, which I have laid out here on the tabletop. We do have a bag of screws or bolts, nuts, and washers, and then, we have a couple different size conduit clamps to clamp around the actual rack. And then, we also have some L brackets. So according to the instructions, there's about four different ways you can mount this. So the included mounting brackets and hardware allow the ATV box to be mounted on all ATV rack configurations universally.So right here, you can use . the top one is using the 3/4 inch conduit brackets. Take those right around the rack. Also, it comes with half inch conduit brackets to mount it the same way. And then, you have the L shaped mounting brackets. They actually pinch the box in between, so . not pinch, but you can set brackets, set the box in between, and then install the hardware that way. So you will need to drill some holes, or you can place the box directly onto the rack, drill down through it, and secure it with the included hardware. But it does come with the variety pack of hardware, so that way, it's designed to fit on all ATV racks and to just give it that nice, universal design.Again, black powder-coated finishing. Taking a look at the overall dimensions, starting with the overall length, I took a measurement from edge to edge here at the top. I got a measurement of 36 inches long. The width measurement is a basic measurement back to front, and that measured 12 . about 12 and a half, 12 and 5/8ths inches wide. And then, the overall height from bottom to top measured about 12 and 3/4 inches tall. The base of the box measures 12 inches deep by 35 inches long. The weight is around 22 pounds. That offers 3 cubic feet of storage. So we've got a nice, large, opening design. Plenty of storage capacity in here. The product is made in the USA and covered with a limited lifetime warranty, and that's going to do it for today's look at the DeeZee specialty series ATV toolbox.

Info for this part was:

Employee Cole B
Installed by:
Cole B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.