Checking Out the Curt Short-Arm Weight Distribution System with Shank Video

I do have some parts for you but we aren't custom trailer builders and adding electric to a trailer is not a simple task. What I can tell you is that most interior lights are 12 volt so if you want outlets, lights, and shore power you'd need…

This is a subject which causes controversy among several different manufacturers as well as owners. You can check your trailer information tag to see if the trailer manufacturer has rated the trailers GVWR to also include the tongue weight from the…

We do have a few options for replacement WD shanks that have a distance shorter than 8 inches from the center of the hitch pin hole to the center of the adjustment holes. The Convert-A-Ball Cushioned Weight Distribution Shank #AMAC1 fits 2 inch hitch…

For your application I recommend going with the Curt MV Weight Distribution (WD) #C17057 instead of the Curt #17302 because the part you mentioned is only rated for up to 1,000 lbs tongue weight while the MV I recommended is rated for 1,000 lbs -…

The length of the spring bars on the Curt MV Weight Distribution System - Round Bar - 14,000 lbs GTW, 1,400 lbs TW #C17057 is 30-5/8 inches. These are the same bars, #C17074. We do not have this weight distribution system available without the…

Some weight distribution system prohibit reversing because doing so could damage the system. If you are backing up in a straight line though it would be fine. But to make turns while backing up you would need to disengage the spring bars and/or the…

While I was unable to confirm the exact dimensions of the Norcold 1200LRIM, I think your current refrigerator to be 63-1/4 inches tall, 32-11/16 inches wide, and 24 inches deep. Please confirm this. The Everchill RV refrigerator with freezer drawer…

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

Hey Martin! Carrier is no longer making RV AC units. Although there were some plug and play replacements available in the past, everything has switched to the new R32 refrigerant following 2025 EPA guidelines. This means a complete system replacement…

For a regular extension that fits a 2 inch trailer hitch receiver the longest available is going to be 18 inches such as #C45796. In order to reach at least 30 inches you would then need to use a ball mount that measures at least 12 inches from the…

Hello Jim, thanks for reaching out. According to Kia, the tow package connections on a 2024 Sorento will be under the driver's side rear bumper cover. We have not been notified of any changes for the 2025 models, but it is too soon to say for…