Feature Breakdown: Curt Lunette Ring for Adjustable Channel Bracket Video

Thanks for the picture Richard, I can tell by your picture you have a Model 6 surge actuator on your trailer which the #T4846500183 is the correct replacement for if you were wanting a channel style inner slide member replacement.

Grade 8 bolts are recommended for installing the Buyers Products 3" I.D. Heavy-Duty Forged 4-Bolt Mount Lunette Ring #337BDB1394 that you referenced. We actually have a mounting kit for this with part #3378530 that includes the bolts. Then for a…

Although we do offer the mounting kit #3378530, there are no specific plates we carry capable of handling the same capacity as the #337PH30. The only option would be the Buyers Products Weld-On Pintle Hitch Plate #3371809027A. However, this would…

Yes, you can use the Pintle Hook Mount, #63059, in either a rise or drop position. If you need a bolt on pintle hook, use #C48205. It has a 10,000 pound capacity so it has more than enough capacity for your trailer.

When using a Pintle Ball combination hitch like the #PH1 , a certain amount of slack is inevitable because the opening is much larger than if you were using a standard pintle hitch. If you're not already using the 2-5/16" hitch ball, I would…

The Demco Lunette Ring item #DM09557-81 is made in the USA. It fits a 3" wide channel bracket and has a 25,000 lbs capacity. It has a inner diameter of 3" and an outer diameter of 6". What of lunette ring are you looking for?

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

In order to swap from 6-lug hubs to 8-lug hubs on a 7K axle you simply need new hubs, the Trailer Hub and Drum Assembly part #AKHD-865-7-1-EZ-K. The Electric Trailer Brake Kit part #AKEBRK-6 can then be used to add brakes to the un-braked axle. It is…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…