Command Electronics RV Lighting - Porch Light - 328-007-61W Review

content loading



Customers compare 328-007-61W to these similar products




Products Featured in this Video



Review of Command Electronics RV Lighting 328-007-61W


Speaker 1: Today we're taking a look at a multi-purpose LED light. This rectangular multi-purpose light can be used in wet or dry locations. It's ideal for providing extra light in areas where needed. This would be ideal for a trailer, an enclosed trailer, a camper or RV. I already have it hooked up to power, so I want to go ahead and show you what it looks like with some power running to it, and with our overhead lights turned off.So, you can see here it sends out a nice, bright, consistent signal. This is an LED system.

LEDs make great replacements for incandescent lights. They last longer, they burn brighter, and they're much more efficient. With LEDs, you really don't have to worry about replacing bulbs, and you don't have to worry about brittle filaments.Now, this one features what's known as multiple LEDs, or multiple diodes. So, the multi-diode design really helps optimize the overall light output.It does feature a really nice, clear acrylic lens, so that allows plenty of that white light to come through. On the backside, here, we have a two wire pigtail.

So white wires are ground wires, black wire is the power wire. You'll also notice that it's a dual-gasket design, so we have one back here to create a weather-tight area at the installation surface. And then we also have another one in between the base and the lens, so those gaskets do a great job at keeping out dirt and moisture. And they are included.Now, your mounting hardware is sold separately. This is a surface mount installation, so it mounts directly to the surface of your trailer or to your application.

In order to do that, you'll need to make sure that this lens is off of it, and that will allow you go gain access to the four mount hole locations.Taking a look at the measurements real quick, starting with the overall length, measuring edge to edge, we get a measurement of about 5 3/4 inches. Top to bottom is about 3 1/8, and the overall thickness is about 1 inch thick. The mount holes, side to side, are separated on center by about 4 3/4 inches, up and down they're separated on center by about 2 inches.And that's going to do it for today's look at the multi-purpose LED light.


Questions and Comments about this Video

add comment

Info for this part was:

Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.