Expert Review Video:
Base Plates Specs:
Base Plate Features:
Installation Notes:
Drilling required for installation
Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.
Tech Tip:
Product does not fit Winter, Hard Rock, or 75th Anniversary models.
More Information >Base Plates Specs:
Base Plate Features:
Designed for full size pickups and SUVs. Heavy duty frames of those vehicles eliminate the need for a crossbar, making installation of the tow bar easier. Removable drawbars make the baseplates virtually invisible when you're not towing the vehicle. MX base plates only work with tow bars that slide into a 2" trailer hitch.
Installation Notes:
Drilling required for installation
Trimming the shock absorption pad, active air shutter louvers or housing, lower air dam, air deflector, cowling and/or rock guard is required on this model.
Tech Tip:
Product does not fit if equipped with an American Expedition Vehicles bumper.
More Information >Base Plates Specs:
Base Plate Features:
Designed for full size pickups and SUVs. Heavy duty frames of those vehicles eliminate the need for a crossbar, making installation of the tow bar easier. Removable drawbars make the baseplates virtually invisible when you're not towing the vehicle. MX base plates only work with tow bars that slide into a 2" trailer hitch.
Installation Notes:
Drilling required for installation
Trimming the shock absorption pad, active air shutter louvers or housing, lower air dam, air deflector, cowling and/or rock guard is required on this model.
Tech Tip:
Product does not fit if equipped with an American Expedition Vehicles bumper.
More Information >Base Plates Specs:
Base Plate Features:
Designed for full size pickups and SUVs. Heavy duty frames of those vehicles eliminate the need for a crossbar, making installation of the tow bar easier. Removable drawbars make the baseplates virtually invisible when you're not towing the vehicle. MX base plates only work with tow bars that slide into a 2" trailer hitch.
Installation Notes:
Drilling required for installation
Trimming the shock absorption pad, active air shutter louvers or housing, lower air dam, air deflector, cowling and/or rock guard is required on this model.
Tech Tip:
Product does not fit if equipped with an American Expedition Vehicles bumper.
More Information >Base Plates Specs:
Base Plate Features:
Designed for full size pickups and SUVs. Heavy duty frames of those vehicles eliminate the need for a crossbar, making installation of the tow bar easier. Removable drawbars make the baseplates virtually invisible when you're not towing the vehicle. MX base plates only work with tow bars that slide into a 2" trailer hitch.
Installation Notes:
Drilling required for installation
Trimming the shock absorption pad, active air shutter louvers or housing, lower air dam, air deflector, cowling and/or rock guard is required on this model.
Tech Tip:
Product does not fit if equipped with an American Expedition Vehicles bumper.
More Information >Base Plates Specs:
Base Plate Features:
Installation Notes:
Drilling required for installation
Requires some trimming of the belly pan
Tech Tip:
Product does not fit models with an American Expedition Vehicles bumper.
More Information >Base Plates Specs:
Base Plate Features:
Installation Notes:
Drilling required for installation
Requires some trimming of the belly pan
Tech Tip:
Product does not fit models with an American Expedition Vehicles bumper.
More Information >Base Plates Specs:
Base Plate Features:
Installation Notes:
Drilling required for installation
Requires some trimming of the belly pan
Tech Tip:
Product does not fit models with an American Expedition Vehicles bumper.
More Information >Base Plates Specs:
Base Plate Features:
Installation Notes:
Drilling required for installation
Requires temporary removal of bumper/fascia during installation
Requires some trimming of the belly pan
Tech Tip:
Product does not fit Winter, Hard Rock, or 75th Anniversary models.
More Information >Base Plates Specs:
Base Plate Features:
Installation Notes:
Requires temporary removal of bumper/fascia during installation
Drilling required for installation
Requires some trimming of the belly pan
Tech Tip:
Product does not fit if equipped with a Quadratec QRC Front Winch Ready Stubby bumper.
More Information >Base Plates Specs:
Base Plate Features:
Installation Notes:
Requires temporary removal of bumper/fascia during installation
Drilling required for installation
Requires some trimming of the belly pan
More Information >Base Plates Specs:
Base Plate Features:
Installation Notes:
Requires temporary removal of bumper/fascia during installation
Drilling required for installation
Requires some trimming of the belly pan
Tech Tip:
Product does not fit if equipped with a Quadratec QRC Front Winch Ready Stubby bumper.
More Information >Base Plates Specs:
Base Plate Features:
Tech Tip:
Product fits bumper mounts with a 7/8 inch pin diameter, and includes spacers to fit mounts from 5/8 inch to 7/8 inch thick.
More Information >Base Plates Specs:
Base Plate Features:
Tech Tip:
Product will also fit bumpers with a 1 inch thick mount that need extended reach, such as the Smittybilt Gen2 bumpers.
More Information >Base Plates Specs:
Base Plate Features:
Tech Tip:
Product fits bumper mounts with a 1 inch pin diameter, and includes spacers to fit mounts from 5/8 inch to 7/8 inch thick.
More Information >Base Plates Specs:
Base Plate Features:
Base Plates Specs:
Base Plate Features:
Installation Notes:
Drilling required for installation
Fascia trimming required for installation
Trimming or removal of underbody panel required for installation
Tech Tip:
Product does not fit the Rubicon, Hard Rock Edition or 75th Anniversary models.
More Information >Base Plates Specs:
Base Plate Features:
Installation Notes:
Drilling required for installation
Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.
Tech Tip:
Product does not fit Winter, Hard Rock, or 75th Anniversary models.
More Information >Base Plates Specs:
Base Plate Features:
Installation Notes:
Drilling required for installation
Requires temporary removal of bumper/fascia during installation
Trimming or removal of underbody panel required for installation
Tech Tip:
Product does not fit the Hard Rock Edition or 75th Anniversary models.
More Information >Base Plates Specs:
Base Plate Features:
Removable drawbars, held in place with a pin and clip, make the baseplates virtually invisible when not towing the car.
Installation Notes:
Drilling required for installation
Trimming the shock absorption pad, active air shutter louvers or housing, lower air dam, air deflector, cowling and/or rock guard is required on this model.
Tech Tip:
Product does not fit if equipped with an American Expedition Vehicles bumper.
More Information >Base Plates Specs:
Base Plate Features:
Removable drawbars, held in place with a pin and clip, make the baseplates virtually invisible when not towing the car.
Installation Notes:
Drilling required for installation
Trimming the shock absorption pad, active air shutter louvers or housing, lower air dam, air deflector, cowling and/or rock guard is required on this model.
Tech Tip:
Product does not fit if equipped with an American Expedition Vehicles bumper.
More Information >Base Plates Specs:
Base Plate Features:
Removable drawbars, held in place with a pin and clip, make the baseplates virtually invisible when not towing the car.
Installation Notes:
Drilling required for installation
Trimming the shock absorption pad, active air shutter louvers or housing, lower air dam, air deflector, cowling and/or rock guard is required on this model.
Tech Tip:
Product does not fit if equipped with an American Expedition Vehicles bumper.
More Information >Base Plates Specs:
Base Plate Features:
Removable drawbars, held in place with a pin and clip, make the baseplates virtually invisible when not towing the car.
Installation Notes:
Drilling required for installation
Trimming the shock absorption pad, active air shutter louvers or housing, lower air dam, air deflector, cowling and/or rock guard is required on this model.
Tech Tip:
Product does not fit if equipped with an American Expedition Vehicles bumper.
More Information >Base Plates Specs:
Base Plate Features:
Installation Notes:
Drilling required for installation
Tech Tip:
Product fits vehicles with Warn Elite bumper part number 101420.
More Information >Base Plates Specs:
Base Plate Features:
Installation Notes:
Requires temporary removal of bumper/fascia during installation
Requires some trimming of the belly pan
Tech Tip:
Product does not fit Winter, Hard Rock, or 75th Anniversary models.
More Information >Base Plates Specs:
Base Plate Features:
Tech Tip:
Product fits models equipped with an American Expedition Vehicles Premier bumper.
More Information >Base Plates Specs:
Base Plate Features:
Tech Tip:
Product does not fit models with an American Expedition Vehicles bumper.
More Information >Base Plates Specs:
Base Plate Features:
Tech Tip:
Product does not fit models with an American Expedition Vehicles bumper.
More Information >Base Plates Specs:
Base Plate Features:
Tech Tip:
Product does not fit models with an American Expedition Vehicles bumper.
More Information >Videos
for Base Plates
Help Articles
for Base Plates
Expert Answers
for Base Plates
I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the…
view full answer...If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…
view full answer...The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…
view full answer...When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…
view full answer...The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install…
view full answer...The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the…
view full answer...From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we…
view full answer...Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.
view full answer...For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…
view full answer...Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this…
view full answer...The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…
view full answer...On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…
view full answer...Filter Products (58)