2010 Ford Van Trailer Wiring

Features:

Easily connect either a 7-way or 4-way trailer-end connector with this dual-outlet socket. Simply plug this into your vehicle's OEM USCAR wiring system and mount it with the included bracket.

Installation Notes:

Product intended as a factory replacement harness or socket

Features:

Plugs into your vehicles USCAR port and works with 7-way or 4-way trailers - no adapter needed. Endurance features include a 180-degree lid swing and oversized cover to keep dirt out and hookups easy.

Installation Notes:

Product intended as a factory replacement harness or socket

Features:

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.

Installation Notes:

On some models it may require an upgraded flasher or ModuLite®

Installation of wiring 118551 may need additional wiring depending on how you route the power lead. Additional wiring and connectors are available

Features:

Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system.

Features:

Replace the existing 7-way on your vehicle with this socket. Built-in magnet creates tight connection with EZ Connector trailer-end plug (sold separately). Face-to-face contacts mean no bent or broken terminals. O-ring on lid makes a watertight seal.

Installation Notes:

For vehicles with factory tow package; may require additional components or may be used as a replacement harness

This wiring is intended to be used with the 319-S7-07 trailer side plug, which is sold separately.

If your trailer has conventional 7-way wiring, this wiring harness is made compatible with an EZConnect Adapter, which is sold separately.

Features:

Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into OEM tow package wiring harness - no cutting or splicing required.

Features:

Quickly and easily install a 7-way, RV-style trailer connector on your vehicle with this custom wiring harness. T-One connector plugs into OEM tow package wiring harness - no cutting, splicing or tapping required.

Installation Notes:

Exterior mounted plug on some or all models. May require an aftermarket electrical mounting box or bracket (sold separately)

Product intended as a factory replacement harness or socket

Tech Tip:

Wiring works for models factory-equipped with Class II Tow Package, which will have a 16-pin and 4-pin plugs. Vehicles with a Class I Tow Package have only a 16-pin plug and should choose the factory 4-flat wiring.

Features:

Replace the existing 7-way on your vehicle with this socket. Built-in magnet creates tight connection with EZ Connector trailer-end plug (sold separately). Face-to-face contacts mean no bent or broken terminals.

Installation Notes:

For vehicles with factory tow package; may require additional components or may be used as a replacement harness

This wiring is intended to be used with the 319-R7-07 trailer side plug, which is sold separately.

If your trailer has conventional 7-way wiring, this wiring harness is made compatible with an EZConnect Adapter, which is sold separately.

Features:

Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting, splicing or tapping required.

Tech Tip:

Regency models will not be able to route wiring as shown in the instructions.

Features:

Upgrade the 7-way connection on your vehicle and trailer with this complete kit. Built-in magnets create tight connection. O-rings make a watertight seal. Face-to-face contacts mean no bent or broken terminals. Includes plug holder and dummy plug.

Installation Notes:

For vehicles with factory tow package; may require additional components or may be used as a replacement harness