This bracket allows you to mount your windsensor on your Solera Smart Arm 12V power RV awning.Features: Allows you to mount your windsensor on your Solera Smart Arm 12V power RV awning Includes one mount bracket
The rain sensor on this powered roof vent automatically closes the dome and shuts off the fan in rain or snow. The reversible, 10-speed fan has a thermostat to regulate airflow inside your RV. ... And unlike a dome that has only 1 arm, this dome is supported by 2 sturdy arms so that it will not flutter during high winds or while you are driving. The dome has a sensor that will automatically shut off the lift motor when an obstruction is encountered or when the dome reaches the end of its travel.
Add this infrared security sensor to your Solera Smart Arm awning for peace of mind and convenience. Sensor automatically turns on your awning lights when heat or motion is detected. ... Features: Infrared sensor detects motion and heat and automatically turns on the awning lights Deters unwelcome visitors to your RV at night, keeping your campsite safe Gives you some light to get into your RV when you're returning after dark Controlled from the light button on the touchpad Snap-on installation right under your Smart Arm touchpad - no hardwiring Double-sided tape on the back gives it some extra hold to keep it secure Specs: Compatible with Solera Smart Arm awnings only Sensor range: approximately 8' 180-Degree radius
... Use the remote control to open/close lid, change speeds, use light or change fan direction. Automatic rain and heat sensors protect your investment.Features: Sunroof type roof vent fan with integrated LEDs creates airflow and protects against inclement weather 10-Speed fan with reversible direction Digital remote and panel controls for speed, reverse, lid open/close Rain sensor, auto temperature control, and other settings are also controlled by the remote LED strip lighting is set into the interior ceiling flange Stainless steel screen keeps bugs, debris, and small creatures out Sunroof shade protects against bright light and UV rays Interior body flange in white color - lid is smoked gray color Brushless motor is quiet and long-lasting Durable polypropylene can't rust or corrode Installation hardware included Specs: Cutout dimensions: 16" x 16" Flange: 5.5" tall Fan blades: 10 Rated power: 5 to 40 watts Rated voltage: 12V DC Weight: 13 lbs 1-Year warranty (registration required)
This vent cap creates a vacuum to remove odors and gasses from your holding tank and prevent them from entering your RV or camper. Maintenance-free cap has 2 installation options. Fits 1-1/4", 1-1/2", and 2" diameter pipe stacks.The 360 Siphon will successfully and immediately eliminate these odors from your black water holding tank in any wind condition. When wind passes over the cap, it is designed to naturally create an upward vacuum in your vent pipe to exhaust any smells or gasses out of the holding tank to the outside of the RV.
This vent cap creates a vacuum to remove odors and gasses from your holding tank and prevent them from entering your RV or camper. Maintenance-free cap has 2 installation options. Fits 1-1/4", 1-1/2", and 2" diameter pipe stacks.The 360 Siphon will successfully and immediately eliminate these odors from your black water holding tank in any wind condition. When wind passes over the cap, it is designed to naturally create an upward vacuum in your vent pipe to exhaust any smells or gasses out of the holding tank to the outside of the RV.
Use wind power to remove undesirable holding tank odors from your RV with this Cyclone Sewer Vent Cover. The cone-shaped vent rotates 360 degrees and mounts easily to 1-1/2" diameter pipes on your RV's roof.Features: Uses wind power to pull undesirable odors out and away from your RV A gentle breeze is enough to remove the odors Rotates 360 degrees to follow the direction of the wind Aerodynamic shape allows for free movement either while parked or in motion Attaches to any RV with a 1-1/2" outward diameter pipe Easy installation onto RV's roof Includes 3 self-tapping Phillips head screws Requires putty knife, 100-percent silicone caulk, and a 3/32" drill bit Durable polystyrene plastic construction resists corrosion and UV rays Specs: Application: 1-1/2" (outside diameter) pipes Dimensions: 11-11/16" long x 8-7/8" wide x 3-3/8"
... Includes 1 aerodynamic lid with rust-resistant hardware. Helps reduce wind resistance and protect against UV exposure.Features: Replaces the vent lid on your Jensen-style roof vent (prior to 1994) Includes 1 vent lid with rust-resistant hardware Aerodynamic design helps reduce wind resistance UV inhibitors help protect against sun damage Fits: Jensen Style Roof Vents (prior to 1994)
Replaces the vent lid on your Ventline roof vent (prior to 2008) or Elixir vent (1994 and newer). Helps reduce wind resistance and protect against UV exposure. Includes 1 aerodynamic lid.Features: Replaces the vent lid on your Ventline roof vent (prior to 2008) or Elixir vent (1994 and newer) Aerodynamic design helps reduce wind resistance UV inhibitors help protect against sun damage Includes 1 vent lid Fits: Ventline Roof Vents (prior to 2008) Elixir Roof Vents (1994 and newer)
Replaces the vent lid on your Jensen style roof vent (prior to 1994). Helps reduce wind resistance and protect against UV exposure. Includes 1 aerodynamic lid.Features: Replaces the vent lid on your Jensen-style roof vent (prior to 1994) Aerodynamic design helps reduce wind resistance UV inhibitors help protect against sun damage Includes 1 vent lid Fits: Jensen Style Roof Vents (prior to 1994)
... Includes 1 aerodynamic lid with rust-resistant hardware. Helps reduce wind resistance and protect against UV exposure.Features: Replaces the vent lid on your Ventline roof vent (prior to 2008) or Elixir vent (1994 and newer) Includes 1 vent lid with rust-resistant hardware Aerodynamic design helps reduce wind resistance UV inhibitors help protect against sun damage Fits: Ventline Roof Vents (prior to 2008) Elixir Roof Vents (1994 and newer)
Use the power of the wind to draw holding tank odors out of your RV with this plumbing vent. It attaches to most vent pipes, and it rotates 360 degrees so it will catch a breeze no matter which way the wind is blowing or the RV is driving.
Replaces the vent lid on your Elixir roof vent (prior to 1994). Helps reduce wind resistance and protect against UV exposure. Includes 1 aerodynamic lid.Features: Replaces the vent lid on your Elixir roof vent (prior to 1994) Aerodynamic design helps reduce wind resistance UV inhibitors help protect against sun damage Includes 1 vent lid Fits: Elixir Roof Vents (prior to 1994)
Manual RV awnings can be a pain to set up, especially after a long day behind the wheel. When you finally park, you don't want another job. This electric awning runs off a wall switch. Just stand and press while the awning does all the work.Less Setup Work: After a long drive, you aren't outside walking it out by hand. Fast Retraction When the Weather Turns: If wind or rain roll in, retract the awning from inside your RV. Precise Control: The awning stops the moment you release the switch. Reinforced High-Stress Areas: Protects the areas near the arms where fabric tears usually start.
Manual RV awnings can be a pain to set up, especially after a long day behind the wheel. When you finally park, you don't want another job. This electric awning runs off a wall switch. Just stand and press while the awning does all the work.Less Setup Work: After a long drive, you aren't outside walking it out by hand. Fast Retraction When the Weather Turns: If wind or rain roll in, retract the awning from inside your RV. Precise Control: The awning stops the moment you release the switch. Reinforced High-Stress Areas: Protects the areas near the arms where fabric tears usually start.
Manual RV awnings can be a pain to set up, especially after a long day behind the wheel. When you finally park, you don't want another job. This electric awning runs off a wall switch. Just stand and press while the awning does all the work.Less Setup Work: After a long drive, you aren't outside walking it out by hand. Fast Retraction When the Weather Turns: If wind or rain roll in, retract the awning from inside your RV. Precise Control: The awning stops the moment you release the switch. Reinforced High-Stress Areas: Protects the areas near the arms where fabric tears usually start.
Manual RV awnings can be a pain to set up, especially after a long day behind the wheel. When you finally park, you don't want another job. This electric awning runs off a wall switch. Just stand and press while the awning does all the work.Less Setup Work: After a long drive, you aren't outside walking it out by hand. Fast Retraction When the Weather Turns: If wind or rain roll in, retract the awning from inside your RV. Precise Control: The awning stops the moment you release the switch. Reinforced High-Stress Areas: Protects the areas near the arms where fabric tears usually start.
Stale air and trapped heat can make your RV feel smaller than it is. This replacement roof vent with pivoting fan lets you aim airflow where it matters, helping your cabin stay fresh and breathable from daybreak to bedtime. Pre-Order Now!When the air starts to feel heavy, a simple pivot of the fan keeps air circulating where you need it so the cabin feels fresh and breathable again without relying only on air conditioning. And when the day finally winds down, you can turn the fan toward your bunk and let a steady stream of air move across the bed instead of circling near the ceiling.
Stale air and trapped heat can make your RV feel smaller than it is. This replacement roof vent with pivoting fan lets you aim airflow where it matters, helping your cabin stay fresh, breathable, and comfortable from daybreak to bedtime.When the air starts to feel heavy, a simple pivot of the fan keeps air circulating where you need it so the cabin feels fresh and breathable again without relying only on air conditioning. And when the day finally winds down, you can turn the fan toward your bunk and let a steady stream of air move across the bed instead of circling near the ceiling.
This manual-lift roof vent has a 4-speed fan for efficient airflow inside your RV, camper, or trailer. Ceiling fan mode circulates air when vent is closed. The manual knob opens and closes the dome, and the removable bug screen keeps insects out.Unlike a dome that has only 1 arm, this manual-lift dome is supported by 2 sturdy arms so that it will not flutter during high winds or while you are driving. And a manual hand knob is built into the underside of the vent to allow you to open and close the dome.
The built-in rain shield on this manual roof vent protects the interior of your RV or camper from rainwater. The 4-speed fan provides efficient airflow inside your RV. Ceiling fan mode circulates air when vent is closed.Unlike a dome that has only 1 arm, this manual-lift dome is supported by 2 sturdy arms so that it will not flutter during high winds or while you are driving. And a manual hand knob is built into the underside of the vent to allow you to open and close the dome.
This manual-lift roof vent has a 4-speed fan for efficient airflow inside your RV, camper, or trailer. Ceiling fan mode circulates air when vent is closed. The manual knob opens and closes the dome, and the removable bug screen keeps insects out.Unlike a dome that has only 1 arm, this manual-lift dome is supported by 2 sturdy arms so that it will not flutter during high winds or while you are driving. And a manual hand knob is built into the underside of the vent to allow you to open and close the dome.
Perfect for use with high-powered fans, this cover has a wide vent area so that it provides more airflow than standard covers. EZClip pins allow the cover to be opened and closed with ease. No-drill installation on MaxxFan and MaxxFan Plus vents.Features: Roof vent cover for your RV or camper enables you to open the vent and operate the fan in any weather Allows air to circulate at all times, even when you're away or sleeping Keeps rainwater from entering and damaging RV interior Prevents heat buildup Designed for use with high-powered, high-speed fans Including MaxxFan Plus vents and certain MaxxFan Deluxe, Fan-Tastic Vent, and Shurflow vents Tall cover offers more roof vent lid clearance than other MaxxAir vent covers Wide vent area on the back of the cover maximizes airflow Less airflow restriction than standard vent covers Angled louvers allow smoke, odors, and stale air to escape EZClip pins make it simple to open or remove the cover for roof vent maintenance - no tools needed To open, pull pins out of the cover To close, slide pins in and push them up to lock in place Durable, high-density polyethylene construction is UV resistant Translucent material lets some light through Sleek, aerodynamic design reduces wind resistance Simple installation over roof vent with no need to drill into the roof of your RV or trailer No drilling required for installation on MaxxFan and MaxxFan Plus roof vents Mounts on frame of roof vent with included hardware Add-on bug screen (sold separately) keeps out insects and debris Black color Made in the USA Specs: Application: designed to fit over most standard 14" x 14" roof vents Designed specifically to fit 2015 and newer MaxxFan and MaxxFan Plus roof vents with mounting tabs Can be used with high-powered, high-speed fans Overall dimensions: 26-1/2" long x 18-1/8" wide x 10-1/4" tall Inside dimensions: 25" long x 16-3/4" wide x 9-1/2" tall Vent area dimensions: 15-1/2" wide x 10-1/4" tall 6-Year limited warranty Note: Some vents may not open fully when used with this vent cover.
UV-resistant cover installs over your roof vent so you can open the vent and operate the fan in any weather. Zero-Leak mounting brackets and hardware eliminate the need to drill into your roof for installation.Features: Roof vent cover for your RV or camper enables you to open the vent and operate the fan in any weather Allows air to circulate at all times, even when you're away or sleeping Keeps rainwater from entering and damaging RV interior Prevents heat buildup Angled louvers on the back of the cover allow smoke, odors, and stale air to escape Durable, high-density polyethylene construction is UV resistant Translucent material lets some light through Sleek, aerodynamic design reduces wind resistance Zero-Leak mounting system prevents leaks by eliminating the need to drill into the roof of your RV or trailer Mounts on frame of roof vent - drilling may be required Includes all hardware needed for installation Translucent white color Made in the USA Specs: Application: designed to fit over most standard 14" x 14" roof vents Overall dimensions: 20" long x 19" wide x 9-1/2" tall Inside dimensions: 19" long x 17" wide x 9" tall Vent area dimensions: 15-1/2" wide x 9" tall 6-Year limited warranty Notes: Some vents may not open fully when used with this vent cover.
Filters
