... Bulb seal slides onto existing track on the RV frame or can be used with SteeleRubber wiper seals with integrated track.Features: Rubber bulb seal replaces worn out weather stripping around slide outs Commonly found on Forest River campers and other RVs Works with stick-on wiper seal with track (SR27FR, SR67FR, and SR99FR - sold separately) Easy installation - slide onto existing track located on the RV frame surrounding the slide-out Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 30' long x 1" wide x 7/8" tall Made in the USA
... Bulb seal slides onto existing track on the RV frame or can be used with SteeleRubber wiper seals with integrated track.Features: Rubber bulb seal replaces worn out weather stripping around slide outs Commonly found on Forest River campers and other RVs Works with stick-on wiper seal with track (SR39FR, SR87FR, and SR47FR - sold separately) Easy installation - slide onto existing track located on the RV frame surrounding the slide-out Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 15' long x 1-1/8" wide x 7/8" tall Channel width: 1" Made in the USA
Replace your old and worn out weather stripping before water damage creates a costly headache. Slides onto existing 3/16" track commonly found on the outer wall of the slide out.Features: Rubber seal replaces worn out weather stripping around slide outs Typically found on the inside edge of the slide-out outer wall Ideal for Thor Citation RVs Commonly paired with bulbless wiper seals (SR29FR or SR96FR - sold separately) Bulb design compresses evenly to prevent side-flop and for greater surface contact Easy installation - slide into onto existing track and trim any extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 30' long x 13/16" wide x 1" tall Made in the USA
If you're having trouble finding just the right weather stripping for your RV slide out, this will get you a custom fit. This wiper includes a track for a C-channel bulb seal in the height you need. Easy installation with peel-and-stick adhesive.Features: RV slide out seal stops water and pests from getting into your living area Ideal for Jayco Eagle 5th wheels and other RVs Integrated track creates installation point for bulb seal to weatherproof slide when closed Compatible with 1" and 1-3/16" channel bulb seals (SR84FR and SR37FR - sold separately) Peel-and-stick installation with pre-applied 3M adhesive backing Apply the seal to the RV frame surrounding the slide-out Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 30' long x 2-7/8" wide Made in the USA
Replace broken and worn out trim molding with a durable and longer-lasting upgrade. This seal works like a bumper to protect against impacts and scuffs and keeps screw tracks safe from the elements with a clean, finished look. Fits 3/4" tracks.Features: Insert replaces trim molding found on RVs, boats, and utility vehicles Protects your ride from impacts, scuffs, and the elements Weatherproofs screw tracks to prevent deterioration Easy installation - snaps into 3/4" tracks and moldings Tucking tool recommended to ease installation (sold separately) Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 25' long x 7/8" wide x 3/8" tall Made in the USA
Replace your old and worn out weather stripping around doors and hatches of your RV before water damage creates a costly headache. Adhesive backing is pre-applied for an easy DIY install.Features: Rubber seal is used for weatherproofing the doors and hatches of your RV or trailer Skirting around recessed adhesive protects connection from the elements Peel-and-stick installation with pre-applied 3M adhesive backing Remove backing and apply the seal to the frame Surface preparation recommended to remove any old adhesive Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 30' long x 3/4" wide x 1/2" tall 3/4" Tall with tab Made in the USA
Replace your old and worn out weather stripping around your compartment doors before water damage creates a costly headache. This bulb seal installs onto 3/16" - 1/4" thick flanges. Flexible core keeps seal in place on rounded corners.Features: Rubber push-on seal is used for weatherproofing compartment doors of your RV or trailer Ideal for late 90's Fleetwood campers, the 2009 Fleetwood Pulse 24D basement utility compartments, and more Flexible core helps seam maintain its grip in rounded areas Easy installation - press onto 3/16" - 1/4" thick flanges around door openings Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 15' long x 3/4" wide x 5/8" tall Made in the USA
Replace broken and worn out trim molding with a durable and longer-lasting upgrade. This seal works like a bumper to protect against impacts and scuffs and keeps screw tracks safe from the elements with a clean, finished look. Fits 1/2" tracks.Features: Insert replaces trim molding found on RVs, boats, and utility vehicles Protects your ride from impacts, scuffs, and the elements Weatherproofs screw tracks to prevent deterioration Easy installation - snaps into 1/2" tracks and moldings Tucking tool recommended to ease installation (sold separately) Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 15' long x 1/8" wide x 5/8" tall Made in the USA
Replace your old and worn out weather stripping around doors and hatches of your RV before water damage creates a costly headache. Adhesive backing is pre-applied for an easy DIY install.Features: Rubber seal is used for weatherproofing the doors of your RV or trailer Commonly found on Jayco Seismic, Octane, and Talon Trailer drop gates Also found on other doors, compartments, and hatches Recessed adhesive strip protects seal from collecting debris and gives a clean, finished look Peel-and-stick installation with pre-applied 3M adhesive backing Remove backing and apply the seal to the RV frame Surface preparation recommended to remove any old adhesive Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 15' long x 3/4" wide x 9/16" tall Made in the USA
Replace your old and worn out weather stripping around your RV windows before water damage creates a costly headache. Press-in seal easily installs between the glass and metal frame on your RV to stop leaks and reduce noise and vibration.Features: Window edge weather stripping keeps water from leaking in around RV windows Reduces noise from wind and vibration Often used with outer window weather stripping (SR73FR - sold separately) Easy installation - press in weather stripping into gaps between the glass and the retaining metal frame Use scissors to trim extra seal Tucking tool recommended to ease installation (sold separately) EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 12' long x 1/4" wide x 1/2" tall Made in the USA
Replace your old and worn out weather stripping around your RV windows before water damage creates a costly headache. Press-in seal easily installs between the glass and metal frame on your RV to stop leaks and reduce noise and vibration.Features: Window edge weather stripping keeps water from leaking in around RV windows Found on Thor Four Winds 5000 Class C RVs and 1995 Roadtrek 190 Versatile Class B campers Reduces noise from wind and vibration Often used with outer window weather stripping (SR73FR - sold separately) Easy installation - press in weather stripping into gaps between the glass and the retaining metal frame Use scissors to trim extra seal Tucking tool recommended to ease installation (sold separately) EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 20' long x 1/4" wide x 1/2" tall Made in the USA
Replace the gasket on your roof-mounted RV air conditioner with this SteeleRubber EPDM sponge rubber gasket. Works with most RV and marine ACs, especially Dometic and Coleman air conditioners.Features: Replace the gasket on your roof-mounted RV air conditioner with this SteeleRubber EPDM sponge rubber gasket Works with most RV and marine ACs, especially Dometic and Coleman air conditioners Resists UV, ozone, and weather damage with closed-cell EPDM rubber construction Includes pressure-sensitive adhesive-backing for installation Made in the USA Note: The foam center panel is only for packaging and may or may not be included.
Replace your old, rail-mounted wiper seal before water damage creates a costly headache. This durable weather stripping is easy to install on existing rails. The bulbed blade helps grab the slide walls, so it always folds out properly.Features: RV slide out seal stops water and pests from getting into your living area Replaces the wiper seal found on Northwood Fox Mountain 235RLS 5th wheels and other RVs Also replaces wiper seals found on some compartment doors Bulbed tip helps seal fold out properly as slide extends Easy installation - push onto existing railing for weather stripping Compatible with SteeleRubber Products bulb seals for added weatherproofing when slide outs are closed EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Made in the USA Overall Dimensions: 2-1/2" wide x 11/16" deep x 15' long
... Bulb seal slides onto existing track on the RV frame or can be used with SteeleRubber wiper seals with integrated track.Features: Rubber bulb seal replaces worn out weather stripping around slide outs Protects your RV from weather and pests when slide-out is closed Fins prevent side-flop when compressed and increase contact surface size Easy installation - slide onto existing track located on the RV frame surrounding the slide-out Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 60' long x 1" wide x 1-1/8" tall Made in the USA
... Bulb seal slides onto existing track on the RV frame or can be used with SteeleRubber wiper seals with integrated track.Features: Rubber bulb seal replaces worn out weather stripping around slide outs Ideal for 2010 Big Horn by Heartland 5th wheel and other RVs Works with stick-on wiper seal with track (SR39FR, SR87FR, and SR47FR - sold separately) Easy installation - slide onto existing track located on the RV frame surrounding the slide-out Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 15' long x 1-3/16" wide x 1-3/16" tall Made in the USA
Replace your old, rail-mounted wiper seal before water damage creates a costly headache. This durable weather stripping is easy to install on existing rails. The bulbed blade helps grab the slide walls, so it always folds out properly.Features: RV slide out seal stops water and pests from getting into your living area Replaces the wiper seal found on Northwood Fox Mountain 235RLS 5th wheels and other RVs Also replaces wiper seals found on some compartment doors Bulbed tip helps seal fold out properly as slide extends Easy installation - push onto existing railing for weather stripping Compatible with SteeleRubber Products bulb seals for added weatherproofing when slide outs are closed EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Made in the USA Overall Dimensions: 2-1/2" wide x 11/16" deep x 30' long
... Bulb seal slides onto existing track on the RV frame or can be used with SteeleRubber wiper seals with integrated track.Features: Rubber bulb seal replaces worn out weather stripping around slide outs Ideal for 2010 Big Horn by Heartland 5th wheel and other RVs Works with stick-on wiper seal with track (SR49FR, SR59FR, and SR77FR - sold separately) Easy installation - slide onto existing track located on the RV frame surrounding the slide-out Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 60' long x 1-3/16" wide x 1-3/16" tall Made in the USA
... Bulb seal slides onto existing track on the RV frame or can be used with SteeleRubber wiper seals with integrated track.Features: Rubber bulb seal replaces worn out weather stripping around slide outs Ideal for 2010 Big Horn by Heartland 5th wheel and other RVs Works with stick-on wiper seal with track (SR27FR, SR67FR, and SR99FR - sold separately) Easy installation - slide onto existing track located on the RV frame surrounding the slide-out Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 30' long x 1-3/16" wide x 1-3/16" tall Made in the USA
... Bulb seal slides onto existing track on the RV frame or can be used with SteeleRubber wiper seals with integrated track.Features: Rubber bulb seal replaces worn out weather stripping around slide outs Protects your RV from weather and pests when slide-out is closed Fins prevent side-flop when compressed and increase contact surface size Easy installation - slide onto existing track located on the RV frame surrounding the slide-out Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 30' long x 1" wide x 1-1/8" tall Made in the USA
Replace old and worn out weather stripping all around your RV before water damage creates a costly headache. Compact size makes this a universally useful seal for doors, windows, and hatches of RVs and trailers.Features: Universal rubber seal is used for weatherproofing the doors, windows, and hatches of your RV or trailer Textured ribbing improves surface contact to keep out the elements Peel-and-stick installation with pre-applied 3M adhesive backing Remove backing and apply the seal to the frame Surface preparation recommended to remove any old adhesive Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 20' long x 3/8" wide x 3/16" tall Made in the USA
... Bulb seal slides onto existing track on the RV frame or can be used with SteeleRubber wiper seals with integrated track.Features: Rubber bulb seal replaces worn out weather stripping around slide outs Commonly found on Forest River campers and other RVs Works with stick-on wiper seal with track (SR49FR, SR59FR, and SR77FR - sold separately) Easy installation - slide onto existing track located on the RV frame surrounding the slide-out Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 60' long x 1" wide x 7/8" tall Made in the USA
... Bulb seal slides onto existing track on the RV frame or can be used with SteeleRubber wiper seals with integrated track.Features: Rubber bulb seal replaces worn out weather stripping around slide outs Protects your RV from weather and pests when slide-out is closed Fins prevent side-flop when compressed and increase contact surface size Easy installation - slide onto existing track located on the RV frame surrounding the slide-out Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 15' long x 1" wide x 1-1/8" tall Made in the USA
... Bulb seal slides onto existing track on the RV frame or can be used with SteeleRubber wiper seals with integrated track.Features: Rubber bulb seal replaces worn out weather stripping around slide outs Protects your RV from weather and pests when slide-out is closed Easy installation - slide onto existing track located on the RV frame surrounding the slide-out Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 30' long x 1-1/8" wide x 15/16" tall Made in the USA
... Bulb seal slides onto existing track on the RV frame or can be used with SteeleRubber wiper seals with integrated track.Features: Rubber bulb seal replaces worn out weather stripping around slide outs Protects your RV from weather and pests when slide-out is closed Easy installation - slide onto existing track located on the RV frame surrounding the slide-out Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 15' long x 1-1/8" wide x 15/16" tall Made in the USA
Filters
