Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
For a standard axle we have the Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern #e25GR which is rated for 2,000 lbs but the spring seats are 48" apart on center so for this to fit you'll have to cut off the current sets and have…
view full answer...The Pollak Black Plastic, 7-Pole, RV-Style Trailer Connector - Trailer End #PK12706 will match the colors and locations of the attached photo. I've also attached a wiring article to assist further if the colors don't match functions…
view full answer...For a 5000-lb travel trailer with tongue weight (TW) of 450-lbs you can use a weight distribution/sway control system such as the Equal-i-zer 4-Point Weight Distribution System #EQ37060ET which works effectively over a range of trailer TW from 200-…
view full answer...The answer that you read on a previous question means the Autowbrake part #3430001 will override the vehicle's integrated brake controller because the blue wire from the trailer connector (that activates the electric brakes) is now wired to the…
view full answer...If you installed the Autowbrake Electric Brake Controller #3430001 on a trailer it would not allow the vehicle's brake controller to activate the brakes since that circuit would not run to the tow vehicle at all anymore and would only run to the…
view full answer...You could use the trailer mounted battery to power the Autowbrake Electric Brake Controller #3430001. However, it is possible that the unit will deplete the battery and you won't have any trailer brakes. The battery could receive a maintenance…
view full answer...Any input from an in-cab brake controller, factory or aftermarket, would be bypassed by the Autowbrake Electric Brake Controller #3430001. No modification is necessary! I have included a link to a video review for you.
view full answer...According to the installation details linked below, if the trailer is connected to the tow vehicle, the yellow charging light will always be on. I spoke with my contact at Hopkins and he stated that the Engager Trailer BreakAway Kit with Charger and…
view full answer...It sounds like your 2008 Ram 1500 has a factory 4-way connector instead of the factory 7-way connector. To add a 7-way connector you will need the #ETBC7 which will plug into your 4-way connector and you will just need to make a few more connections.…
view full answer...It sounds like you mean the 2023 Chevy Silverado 1500 you're looking at doesn't come with a brake controller. You can add a brake controller to any vehicle as long as it has a 7-way installed. What I recommend for this truck is the Redarc…
view full answer...You certainly can! Installing a brake controller is fairly easy if you are familiar with running wiring. To install a brake controller like the popular Tekonsha Prodigy P3 #90195 you will need to run the wires on the pigtail to the following…
view full answer...Luckily we have a kit that will provide you with everything that you will need to set up a 7-way connector at the back of your 2008 Dodge Ram 1500 Big Horn. I would recommend a 7-way connector over a 6-way because it will give you that additional pin…
view full answer...Related Searches
Filter Your Search
Contact and Help