Guard against LED-related turn signal problems with these load-resistors. Simple, effective system builds resistance that corrects flash timing, thereby preventing the "hyperflash" phenomenon that occurs with LED indicators.This fast flashing is similar to what your factory signal light does when the bulb is about to burn out. To prevent this phenomenon, install a load-resistor kit along with your new LEDs. Each loadresistor will build additional resistance in the line to correct the flash timing of the bulb, resulting in a properly functioning indicator.
This loadresistor prevents the LED turn signal light on your truck or trailer from hyperflashing. Resistor has right-angle male PL-3 plug on one end and female PL-3 plug on the other end.Features: Prevents the LED turn signal light on your truck or trailer from hyperflashing so that it functions properly Right-angle male PL-3 plug connects to light Female PL-3 plug connects to truck or trailer Mounts to the surface of the truck or trailer Resistor gets very warm - mounting to metal is recommended Specs: 12 Volts 6 Ohms 50 Watts Wiring length: 10.35" Quantity: 1 loadresistor 3-Year warranty Note: One resistor is required per LED light.
These loadresistors prevent hyperflashing on turn signals with LED light bulbs. Compact design - fits in tight spaces.Features: Loadresistors prevent hyperflashing on turn signals with LED bulbs Work with most import and domestic vehicles Compact design - fits in tight spaces Compatible with 12V DC systems Surface mounts behind vehicle headlights - hardware not included Quick connect plugs easily connect to power source Specs: Quantity: 2 loadresistors Unit dimensions: 2" long x 1-1/4" wide x 11/16" tall Distance between mounting holes (center on center): 1-1/8" Electrical resistance: 6 Ohms Wattage: 50 watts 5-Year limited warranty
This loadresistor prevents the LED turn signal light on your truck or trailer from hyperflashing. Resistor has right-angle male PL-3 plug on one end and a pigtail connection on the other end.Features: Prevents the LED turn signal light on your truck or trailer from hyperflashing so that it functions properly Right-angle male PL-3 plug connects to light 3-Wire lead hardwires to truck or trailer Mounts to the surface of the truck or trailer Resistor gets very warm - mounting to metal is recommended Specs: 12 Volts 6 Ohms 50 Watts Wiring length: 10.87" Quantity: 1 loadresistor 3-Year warranty Note: One resistor is required per LED light.
Guard against LED-related turn signal problems with this load-resistor kit. Simple, effective system builds resistance that corrects flash timing, thereby preventing the "hyperflash" phenomenon that occurs with LED indicators.This fast flashing is similar to what your factory signal light does when the bulb is about to burn out. To prevent this phenomenon, install a load-resistor kit along with your new LEDs. This kit will build additional resistance in the line to correct the flash timing, resulting in a properly functioning indicator.
Guard against LED-related turn signal problems with this load-resistor kit. Simple, effective system builds resistance that corrects flash timing, thereby preventing the "hyperflash" phenomenon that occurs with LED indicators.This fast flashing is similar to what your factory signal light does when the bulb is about to burn out. To prevent this phenomenon, install a load-resistor kit along with your new LEDs. This kit will build additional resistance in the line to correct the flash timing, resulting in a properly functioning indicator.
This loadresistor prevents the turn signal light on your truck or trailer from hyperflashing when upgraded from incandescent to LED lights. ... Features: Prevents the LED turn signal light on your truck or trailer from hyperflashing so that it functions properly Right-angle male PL-3 plug connects to light Female PL-3 plug connects to truck or trailer Mounts to the surface of the truck or trailer Resistor gets very warm - mounting to metal is recommended Made in the USA Specs: Electrical resistance: 10 Ohms Wattage: 50 watts Quantity: 1 loadresistor 1-Year limited warranty Note: One resistor is required per LED light.
Plug this adapter into your existing 7-way when towing a trailer equipped with LED lights so that your vehicle's computer will recognize the trailer's signals. Designed for use on vehicles with Trailer Lamp-Out sensors.Features: Plugs into an existing 7-way socket to provide a new 7-way socket that is able to recognize LED trailer lights Built-in resistors enable LED signals from your trailer to be read by your vehicle's computer No cutting or splicing required Great for use on vehicles with Trailer Lamp-Out sensors, such as Audi, Mercedes-Benz, and Volkswagen vehicles with the factory tow package Spring-loaded dust cover protects terminals from moisture and debris when connector is not in use 1-Year limited warranty
An over 80" ID bar and white load light built into one housing. Keep wide trailers properly marked on the road or switch on bright white light for backing into tight spots, loading equipment, or setting up at camp after dark.Over 80" ID Bar And Load Lamp: Red/white combo keeps wide trailers marked and lights up the work area. Add 500 Lumens Of Work Light: White LEDs provide usable light for backing, loading, and campsite tasks.
7-7/16" x 1-5/8" Rectangular, surface-mount load ramp light with 4 LEDs produces a bright white beam to illuminate a wide area. Powder coated black aluminum housing resists impact and corrosion. ... Features: Rectangular, LED light emits a powerful white light so you can easily see your ramp while loading Aluminum construction and built-in heat sink protect against overheating Black powder coat resists corrosion LEDs are energy efficient, long-lasting, and vibration resistant Surface mount unit installs with 2 screws (not included) Hardwires to your application 12V compatible Specs: Overall dimensions: 7-7/16" wide x 1-5/8" tall x 1-3/4" thick Light output: 2,000 lumens Diodes: 4 Input voltage: 9V - 30V Power draw at 12V: 1.3 amps - 1.9 amps Wire length: 9" IP rated: 68 Limited lifetime warranty
Cinching tie-downs secure your gear to a cargo carrier or roof rack. Each durable polypropylene strap has a chromate-plated steel cam buckle, and the included buckle pads fit over the buckles to prevent scratches. 750 lbs WLL when strap is looped.For example, if you are using straps with a WLL of 500 lbs each to tie down a load weighing 1,000 lbs, then you need at least 2 straps to safely secure that load. It is recommended that you always use straps in pairs.
Cinching tie-downs secure your gear to a cargo carrier or roof rack. Each durable polypropylene strap has a chromate-plated steel cam buckle, and the included buckle pads fit over the buckles to prevent scratches. 750 lbs WLL when strap is looped.For example, if you are using straps with a WLL of 500 lbs each to tie down a load weighing 1,000 lbs, then you need at least 2 straps to safely secure that load. It is recommended that you always use straps in pairs.
17" Long x 1-3/8" tall x 1" deep. Waterproof identification light bar is designed for trailers wider than 80". Durable polycarbonate lens and housing. Surface mount to trailer. 2-Wire pigtail.
... No need to pull over and re-tighten. Zinc-coated double J-hooks resists rust. 6,000-lb Max load.For example, if you are using straps with a WLL of 500 lbs each to tie down a load weighing 1,000 lbs, then you need at least 2 straps to safely secure that load. It is recommended that you always use straps in pairs.
These easy-to-use, retractable ratchet straps secure your cargo and automatically wind onto a spring-loaded spool when you're done. Eliminates the need to tie down excess strap. Coated S-hooks attach to anchor points. 1,500 lbs Max load.For example, if you are using straps with a WLL of 500 lbs each to tie down a load weighing 1,000 lbs, then you need at least 2 straps to safely secure that load. It is recommended that you always use straps in pairs.
This easy-to-use, retractable ratchet strap secures cargo and automatically winds onto a spring-loaded spool when you're done. Eliminates the need to tie down excess strap. Coated J-hooks with D-rings attach to anchor points. 3,000 lbs Max load.For example, if you are using straps with a WLL of 500 lbs each to tie down a load weighing 1,000 lbs, then you need at least 2 straps to safely secure that load. It is recommended that you always use straps in pairs.
This easy-to-use, retractable ratchet strap secures your cargo and automatically winds onto a spring-loaded spool when you're done. Eliminates the need to tie down excess strap. Coated S-hooks attach to anchor points. 1,500 lbs Max load.For example, if you are using straps with a WLL of 500 lbs each to tie down a load weighing 1,000 lbs, then you need at least 2 straps to safely secure that load. It is recommended that you always use straps in pairs.
Built-in shock absorbers ensure this ratchet strap stays tight around your gear or equipment so that you won't have to get out and tighten it while traveling rough roads. Zinc-coated double J-hooks resist rust. 6,000-lb Max load.For example, if you are using straps with a WLL of 500 lbs each to tie down a load weighing 1,000 lbs, then you need at least 2 straps to safely secure that load. It is recommended that you always use straps in pairs.
Filters
