15-1/2" Long x 1" tall x 1/2" thick ID lightbar. Waterproof LED identification lightbar with integrated utility light for trailers. Polycarbonate lenses and base. Surface mount. ... Features: Trailer light functions as an identification lightbar for trailers wider than 80" Also has a built-in utility light Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and base construction Mounts to surface of trailer Hardwire installation DOT compliant P2 rated Specs: Overall dimensions: 15-1/2" long x 1" tall x 1/2" deep Distance between mounting holes (center on center): 14-1/2" Mounting hole diameter: 1/8" Diodes: 17 12-Volt application Lumens: 500 Actual 400 Effective Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
... Stay legal. Look good doing it. With a smoke lens and black housing, this light blends into your black trailer while making you more visible to other drivers, whether you're cruising, turning, braking, or going in reverse.Features: ID lightbar for trailers over 80" wide Turn, brake, tail, and backup light Smoke lens with red and white LEDs Black polycarbonate housing Surface mount - Hardware not included 4-Wire pigtail - Hardwires to trailer DOT compliant Specs: Dimensions: 15" long x 1-1/16" wide x 5/8" thick Distance between mounting holes: 14-1/8" Diodes: 15 Voltage: 12V Power draw: 0.29 amps Lifetime warranty on LEDs Quantity: 1 lightbar
15-9/16" L x 1-3/16" W x 1-5/16" D; Three separate lights on the base; lights have replaceable lenses and bulbs; surface mount on 6-1/8" centers; 1-wire; total of 3 incandescent bulbsThis red three lightbar measures 15-9/16" long x 1-3/16" wide x 1-5/16" deep. Lightbar contains three separate, replaceable MC68RB lights on a white base.
... Stay legal. Look good doing it. With a smoke lens and black housing, this light blends into your black trailer while making you more visible to other drivers, whether you're cruising, turning, braking, or going in reverse.Features: ID lightbar for trailers over 80" wide Turn, brake, tail, and backup light Smoke lens with red and white LEDs Black polycarbonate housing Surface mount - Hardware not included 4-Wire pigtail - Hardwires to trailer DOT compliant Specs: Dimensions: 20-1/2" long x 1" wide x 3/4" thick Distance between mounting holes: 19-5/8" Diodes: 21 Voltage: 12V Power draw: Stop/turn: 0.265 amps Tail: 0.24 amps Reverse: 0.30 amps Lifetime warranty on LEDs
Great for mounting on your UTV or truck's grille guard, these fog beam lights provide an even wide spread that is great for low speeds and inclement weather like fog and rain. Brackets and wiring harness included for install.Features: LED fog lights give you high intensity light in an 80-degree horizontal spread for better visibility in inclement weather TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your fog lights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Cool white color matches most factory LED lights Specs: Quantity: 2 lights Application: 1-3/4" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 14.5 watts Power draw: 1.1 amps Lumens: Raw: 2,262 Measured: 1,520 Peak beam intensity: 10,600 candela Illuminance: 106 lux @ 10 m Beam angle: 80 degrees wide x 8 degrees vertical Color temperature: 6000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, the combo beams on these 3" LED pod lights offer versatility while off-roading. Includes mounts and connectors.Features: LED pod lights give you bright light with reduced glare for improved visibility and safety in bad weather Combo pattern is a mix between driving and flood lights for great all-around use TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your fog lights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Cool white color matches most factory LED lights Specs: Quantity: 2 lights Application: 1" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 38.5 watts Power draw: 3 amps Lumens: Raw: 7,920 Measured: 3,500 Peak beam intensity: 46,000 candela Illuminance: 460 lux @ 10 m Color temperature: 6000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, these fog beam lights provide an even wide spread that is great for low speeds and inclement weather like fog and rain. Brackets and wiring harness included for install.Features: LED fog lights give you high intensity light in an 80-degree horizontal spread for better visibility in inclement weather TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your fog lights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Cool white color matches most factory LED lights Specs: Quantity: 2 lights Application: 1" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 36 watts Power draw: 2.7 amps Lumens: Raw: 5,796 Measured: 3,000 Peak beam intensity: 11,900 candela Illuminance: 119 lux @ 10 m Beam angle: 80 degrees wide x 8 degrees vertical Color temperature: 6000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, these fog beam lights provide an even wide spread that is great for low speeds and inclement weather like fog and rain. Brackets and wiring harness included for install.Features: LED fog lights give you high intensity light in an 80-degree horizontal spread for better visibility in inclement weather TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your fog lights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Yellow lenses improve sight lines in inclement weather like rain and fog Specs: Quantity: 2 lights Application: 1" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 36 watts Power draw: 2.7 amps Lumens: Raw: 5,220 Measured: 2,700 Peak beam intensity: 10,900 candela Illuminance: 109 lux @ 10 m Beam angle: 80 degrees wide x 8 degrees vertical Color temperature: 3000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, the combo beams on these 3" LED pod lights offer versatility while off-roading. Includes mounts and connectors.Features: LED pod lights give you bright light with reduced glare for improved visibility and safety in bad weather Combo pattern is a mix between driving and flood lights for great all-around use TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your fog lights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Yellow lenses improve sight lines in inclement weather like rain and fog Specs: Quantity: 2 lights Application: 1-3/4" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 36 watts Power draw: 2.7 amps Lumens: Raw: 5,220 Measured: 2,700 Peak beam intensity: 33,406 candela Illuminance: 334 lux @ 10 m Color temperature: 3000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, the combo beams on these 3" LED pod lights offer versatility while off-roading. Includes mounts and connectors.Features: LED pod lights give you bright light with reduced glare for improved visibility and safety in bad weather Combo pattern is a mix between driving and flood lights for great all-around use TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your fog lights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Cool white color matches most factory LED lights Specs: Quantity: 2 lights Application: 1-3/4" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 36 watts Power draw: 2.7 amps Lumens: Raw: 5,796 Measured: 3,000 Peak beam intensity: 35,100 candela Illuminance: 351 lux @ 10 m Color temperature: 6000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, the combo beams on these 3" LED pod lights offer versatility while off-roading. Includes mounts and connectors.Features: LED pod lights give you bright light with reduced glare for improved visibility and safety in bad weather Combo pattern is a mix between driving and flood lights for great all-around use TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your fog lights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Yellow lenses improve sight lines in inclement weather like rain and fog Specs: Quantity: 2 lights Application: 1-1/4" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 14.5 watts Power draw: 1.1 amps Lumens: Raw: 1,930 Measured: 1,300 Peak beam intensity: 28,100 candela Illuminance: 281 lux @ 10 m Color temperature: 3000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, the combo beams on these 3" LED pod lights offer versatility while off-roading. Includes mounts and connectors.Features: LED pod lights give you bright light with reduced glare for improved visibility and safety in bad weather Combo pattern is a mix between driving and flood lights for great all-around use TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your fog lights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Cool white color matches most factory LED lights Specs: Quantity: 2 lights Application: 1-1/4" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 38.5 watts Power draw: 3 amps Lumens: Raw: 7,920 Measured: 3,500 Peak beam intensity: 46,000 candela Illuminance: 460 lux @ 10 m Color temperature: 6000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, the combo beams on these 3" LED pod lights offer versatility while off-roading. Includes mounts and connectors.Features: LED pod lights give you bright light with reduced glare for improved visibility and safety in bad weather Combo pattern is a mix between driving and flood lights for great all-around use TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your fog lights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Yellow lenses improve sight lines in inclement weather like rain and fog Specs: Quantity: 2 lights Application: 1-1/4" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 36 watts Power draw: 2.7 amps Lumens: Raw: 5,220 Measured: 2,700 Peak beam intensity: 33,406 candela Illuminance: 334 lux @ 10 m Color temperature: 3000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, the combo beams on these 3" LED pod lights offer versatility while off-roading. Includes mounts and connectors.Features: LED pod lights give you bright light with reduced glare for improved visibility and safety in bad weather Combo pattern is a mix between driving and flood lights for great all-around use TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your fog lights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Cool white color matches most factory LED lights Specs: Quantity: 2 lights Application: 1-1/2" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 36 watts Power draw: 2.7 amps Lumens: Raw: 5,796 Measured: 3,000 Peak beam intensity: 35,100 candela Illuminance: 351 lux @ 10 m Color temperature: 6000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, these fog beam lights provide an even wide spread that is great for low speeds and inclement weather like fog and rain. Brackets and wiring harness included for install.Features: LED fog lights give you high intensity light in an 80-degree horizontal spread for better visibility in inclement weather TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your fog lights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Cool white color matches most factory LED lights Specs: Quantity: 2 lights Application: 1-1/4" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 38.5 watts Power draw: 3 amps Lumens: Raw: 7,920 Measured: 3,500 Peak beam intensity: 18,000 candela Illuminance: 180 lux @ 10 m Beam angle: 80 degrees wide x 8 degrees vertical Color temperature: 6000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, these fog beam lights provide an even wide spread that is great for low speeds and inclement weather like fog and rain. Brackets and wiring harness included for install.Features: LED fog lights give you high intensity light in an 80-degree horizontal spread for better visibility in inclement weather TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your fog lights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Cool white color matches most factory LED lights Specs: Quantity: 2 lights Application: 1-1/2" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 38.5 watts Power draw: 3 amps Lumens: Raw: 7,920 Measured: 3,500 Peak beam intensity: 18,000 candela Illuminance: 180 lux @ 10 m Beam angle: 80 degrees wide x 8 degrees vertical Color temperature: 6000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, these fog beam lights provide an even wide spread that is great for low speeds and inclement weather like fog and rain. Brackets and wiring harness included for install.Features: LED fog lights give you high intensity light in an 80-degree horizontal spread for better visibility in inclement weather TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your fog lights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Cool white color matches most factory LED lights Specs: Quantity: 2 lights Application: 1" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 38.5 watts Power draw: 3 amps Lumens: Raw: 7,920 Measured: 3,500 Peak beam intensity: 18,000 candela Illuminance: 180 lux @ 10 m Beam angle: 80 degrees wide x 8 degrees vertical Color temperature: 6000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, these fog beam lights provide an even wide spread that is great for low speeds and inclement weather like fog and rain. Brackets and wiring harness included for install.Features: LED fog lights give you high intensity light in an 80-degree horizontal spread for better visibility in inclement weather TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your fog lights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Cool white color matches most factory LED lights Specs: Quantity: 2 lights Application: 1-1/4" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 36 watts Power draw: 2.7 amps Lumens: Raw: 5,796 Measured: 3,000 Peak beam intensity: 11,900 candela Illuminance: 119 lux @ 10 m Beam angle: 80 degrees wide x 8 degrees vertical Color temperature: 6000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, these fog beam lights provide an even wide spread that is great for low speeds and inclement weather like fog and rain. Brackets and wiring harness included for install.Features: LED fog lights give you high intensity light in an 80-degree horizontal spread for better visibility in inclement weather TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your fog lights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Yellow lenses improve sight lines in inclement weather like rain and fog Specs: Quantity: 2 lights Application: 1-1/4" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 36 watts Power draw: 2.7 amps Lumens: Raw: 5,220 Measured: 2,700 Peak beam intensity: 10,900 candela Illuminance: 109 lux @ 10 m Beam angle: 80 degrees wide x 8 degrees vertical Color temperature: 3000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, the combo beams on these 3" LED pod lights offer versatility while off-roading. Includes mounts and connectors.Features: LED pod lights give you bright light with reduced glare for improved visibility and safety in bad weather Combo pattern is a mix between driving and flood lights for great all-around use TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your fog lights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Cool white color matches most factory LED lights Specs: Quantity: 2 lights Application: 1-3/4" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 14.5 watts Power draw: 1.1 amps Lumens: Raw: 2,262 Measured: 1,520 Peak beam intensity: 31,500 candela Illuminance: 315 lux @ 10 m Color temperature: 6000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, the combo beams on these 3" LED pod lights offer versatility while off-roading. Includes mounts and connectors.Features: LED pod lights give you bright light with reduced glare for improved visibility and safety in bad weather Combo pattern is a mix between driving and flood lights for great all-around use TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your fog lights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Cool white color matches most factory LED lights Specs: Quantity: 2 lights Application: 1" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 36 watts Power draw: 2.7 amps Lumens: Raw: 5,796 Measured: 3,000 Peak beam intensity: 35,100 candela Illuminance: 351 lux @ 10 m Color temperature: 6000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, the combo beams on these 3" LED pod lights offer versatility while off-roading. Includes mounts and connectors.Features: LED pod lights give you bright light with reduced glare for improved visibility and safety in bad weather Combo pattern is a mix between driving and flood lights for great all-around use TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your fog lights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Yellow lenses improve sight lines in inclement weather like rain and fog Specs: Quantity: 2 lights Application: 1-1/2" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 14.5 watts Power draw: 1.1 amps Lumens: Raw: 1,930 Measured: 1,300 Peak beam intensity: 28,100 candela Illuminance: 281 lux @ 10 m Color temperature: 3000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, the combo beams on these 3" LED pod lights offer versatility while off-roading. Includes mounts and connectors.Features: LED pod lights give you bright light with reduced glare for improved visibility and safety in bad weather Combo pattern is a mix between driving and flood lights for great all-around use TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your fog lights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Yellow lenses improve sight lines in inclement weather like rain and fog Specs: Quantity: 2 lights Application: 1" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 38.5 watts Power draw: 3 amps Lumens: Raw: 7,920 Measured: 3,500 Color temperature: 3000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Great for mounting on your UTV or truck's grille guard, these fog beam lights provide an even wide spread that is great for low speeds and inclement weather like fog and rain. Brackets and wiring harness included for install.Features: LED fog lights give you high intensity light in an 80-degree horizontal spread for better visibility in inclement weather TIR optics reduce glare and give you a more concentrated beam pattern that projects light further Amber backlights act as running lights making you extra visible to other motorists when not using your fog lights Bolt-on brackets install onto your grille guard or roll bar - no cutting or drilling OEM aux switch adapter wire lets you use your factory-installed aux switch bank If you don't have a switch bank, the plug-and-play wiring harness will let you control the lights through the included toggle switch Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing and brackets are corrosion resistant IP69K-rated to protect against moisture and high pressure Yellow lenses improve sight lines in inclement weather like rain and fog Specs: Quantity: 2 lights Application: 1-1/2" diameter tubes Light dimensions: 3-5/16" wide x 3-5/16" tall x 2-3/8" deep Weight: 4.1 lbs Operating voltage: 9-16V Wattage: 14.5 watts Power draw: 1.1 amps Lumens: Raw: 1,930 Measured: 1,300 Peak beam intensity: 9,050 candela Illuminance: 91 lux @ 10 m Beam angle: 80 degrees wide x 8 degrees vertical Color temperature: 3000 K Operating temperature: -40 F to 185 F IP rating: IP69K Connection type: Deutsch DT input 8-Year limited warranty
Filters
