Protect your truck and towables from flying rocks and debris with these fully adjustable mud flaps. The heavy-duty rubber flaps slide onto your ball mount or tow bar, and they adjust horizontally and vertically for a custom fit on your vehicle.Features: Protects your truck and towables from damage inflicted by flying rocks and debris Works great when you're towing a boat; snowmobile; ATV; or 5th-wheel, travel or horse trailer Mounts near the bumper yet far enough away from the rear wheels to provide a wide range of protection Guards against backsplash - channels on the back direct water flow downward Customizable to your vehicle's specifications for a perfect fit and maximum coverage Pre-molded cut lines let you trim the mudflaps to any length Includes punch tool to create bolt holes in mudflaps for attaching installation clamps Vertical adjustment enables you to maintain consistent ground clearance no matter your load Just loosen 2 bolts and rotate arms up or down, then re-tighten bolts to lock arms into place Horizontal adjustment of support rods allows the mudflaps to fit the width of most trucks Maintains the factory appearance of your vehicle Use them when you're towing - take them off when you're not Installs and removes easily - no drilling or welding required Slide the center hub onto the shank of your 2" ball mount or tow bar (sold separately) and tighten it with set screws Durable construction of all components ensures years of service and performance Heavy-duty, 3/8" thick black rubber mudflaps with molded, tear-resistant fabric layer Heavy-gauge, stainless-steel-sleeved support rods with corrosion-resistant coating inside Black powder coated aluminum clamps and stainless steel hardware attach mudflaps to support rods UV-protected, black matte powder coat finish on forged aluminum center hub and arms Includes polished, stainless steel trim plates with "Rock Tamers" logo Rock Screen (sold separately) helps prevent damage from stones, gravel, and debris while traveling Specs: Application: most SUVs, vans, RVs, full-size or dually trucks with a 2" x 2" trailer hitch receiver and ball mount Adjustable width (outside to outside): 67-1/4" to 96-3/4" Mudflap dimensions (each): 24-1/4" long x 23-7/8" wide x 3/8" thick Length can be modified to create a custom fit 1-Year limited warranty Note: To use Rock Tamers, there must be at least 1" of clearance between the back of the ball mount face and the trailer hitch receiver opening.
This ball mount uses bumper-stop technology to reduce road shock and provide a more comfortable towing experience. The 12K-rated, channel-style ball mount offers 7" of adjustability, allowing you to tow trailers of various heights.Features: Shock-absorbing ball mount uses twin bump stops to dampen road shock Channel-style ball mount includes draw bar attachment with 1" hole that accomodates a variety of towing needs Perfect for towing hay wagons, anhydrous tanks, and other farm applications Works with all Shocker Hitch ball mounts and attachments, including standard mount, drop mount, pintle hook, and more (all sold separately) Grade 50 steel plate construction and cold-rolled steel shank provide maximum durability Shot blasted and powder coated to prevent rust 2 Easy-to-remove ball mount pins included Large rings are easy to grasp - no more fumbling with small hitch pin heads Large safety clips make securing clips effortless Can accomodate hitchmountedmudflaps Made in the USA Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Gross towing weight: 12,000 lbs Tongue weight: 1,200 lbs Rise: 3-1/2" Drop: 3-1/2" Color: Shocker red and black Overall height: 9-3/4" Distance from center of hitch pin hole to center of adjustment shank hole: 7-1/2" Distance from center of hitch pin hole to front of adjustment shank: 8" Hitch pin hole diameters: 5/8" Distance between vertical adjustment holes: 1" Inside width of channel: 3-3/4" 1-Year warranty Note: Drawbar attachment has no tongue weight rating - it is not designed to be used with a hitch ball.
This ball mount uses bumper-stop technology to reduce road shock and provide a more comfortable towing experience. The 10K-rated, channel-style ball mount offers 7" of adjustability, allowing you to tow trailers of various heights.Features: Shock-absorbing ball mount uses twin bump stops to dampen road shock Ideal for towing trailers and campers between 2,500 lbs and 10,000 lbs Channel-style ball mount and included drop mount and 2" ball provide 7" of adjustability to support a wide range of towing needs Works with all Shocker Hitch ball mounts and attachments, including standard mount, combination ball, pintle hook, sway bar mount, and more (all sold separately) Grade 50 steel plate construction and cold-rolled steel shank provide maximum durability Shot blasted and powder coated to prevent rust; ball is zinc plated 2 Easy-to-remove ball mount pins included Large rings are easy to grasp - no more fumbling with small hitch pin heads Large safety clips make securing clips effortless Can accomodate hitchmountedmudflaps Made in the USA Specs: Application: 2" x 2" trailer hitch receivers Ball size: 2" Gross towing weight: 10,000 lbs Tongue weight: 1,000 lbs Frame is rated for a gross towing weight of 20,000 lbs Max drop: 7" Overall height: 9-3/4" Distance from center of hitch pin hole to center of ball: 11-1/4" Distance from center of hitch pin hole to center of adjustment shank hole: 7-1/2" Distance from center of hitch pin hole to front of adjustment shank: 8-1/4" Hitch pin hole diameters: 5/8" Distance between vertical adjustment holes: 1" Inside width of channel: 3-3/4" 1-Year warranty
Protect your truck and towables from flying rocks and debris with these fully adjustable mud flaps. The heavy-duty rubber flaps slide onto your ball mount or tow bar, and they adjust horizontally and vertically for a custom fit on your vehicle.Features: Protects your truck and towables from damage inflicted by flying rocks and debris Works great when you're towing a boat; snowmobile; ATV; or 5th-wheel, travel or horse trailer Mounts near the bumper yet far enough away from the rear wheels to provide a wide range of protection Guards against backsplash - channels on the back direct water flow downward Customizable to your vehicle's specifications for a perfect fit and maximum coverage Vertical adjustment enables you to maintain consistent ground clearance no matter your load Horizontal adjustment of support rods allows the mudflaps to fit the width of most trucks Maintains the factory appearance of your vehicle Use them when you're towing - take them off when you're not Installs and removes easily - no drilling or welding required Slide the center hub with the appropriate adapter onto the shank of your 2", 2-1-2", or 3" ball mount or tow bar (sold separately) and tighten it with set screws Durable construction of all components ensures years of service and performance Heavy-duty, 3/8" thick black rubber mudflaps hold up to rough conditions Heat-treated forged aluminum and stainless steel components are corrosion resistant Textured black powder coat complements the look of your vehicle and BulletProof Hitches ball mount Specs: Application: most SUVs, vans, RVs, full-size or dually trucks with a 2", 2-1/2", or 3" trailer hitch receiver and ball mount Adjustable width (outside to outside): 73-1/2" to 97-1/2" Mudflap dimensions (each): 24" long x 24" wide x 3/8" thick Length can be modified to create a custom fit 1-Year warranty Note: To use BulletProof Hitches Road Shield MudFlap System, there must be at least 1" of clearance between the back of the ball mount face and the trailer hitch receiver opening.
Protect your truck and towables from flying rocks and debris with these fully adjustable mud flaps. The heavy-duty rubber flaps slide onto your ball mount or tow bar, and they adjust horizontally and vertically for a custom fit on your vehicle.Specs: Application: most SUVs, vans, RVs, full-size or dually trucks with a 3" x 3" trailer hitch receiver and ball mount Adjustable width (outside to outside): 68-1/4" to 97-3/4" Mudflap dimensions (each): 24-1/4" long x 23-7/8" wide x 3/8" thick Length can be modified to create a custom fit 1-Year limited warranty Note: To use Rock Tamers, there must be at least 1" of clearance between the back of the ball mount face and the trailer hitch receiver opening.
Protect your truck and towables from flying rocks and debris with these fully adjustable mud flaps. The heavy-duty rubber flaps slide onto your ball mount or tow bar, and they adjust horizontally and vertically for a custom fit on your vehicle.Features: Protects your truck and towables from damage inflicted by flying rocks and debris Works great when you're towing a boat; snowmobile; ATV; or 5th-wheel, travel or horse trailer Mounts near the bumper yet far enough away from the rear wheels to provide a wide range of protection Guards against backsplash - channels on the back direct water flow downward Customizable to your vehicle's specifications for a perfect fit and maximum coverage Pre-molded cut lines let you trim the mudflaps to any length Includes punch tool to create bolt holes in mudflaps for attaching installation clamps Vertical adjustment enables you to maintain consistent ground clearance no matter your load Just loosen 2 bolts and rotate arms up or down, then re-tighten bolts to lock arms into place Horizontal adjustment of support rods allows the mudflaps to fit the width of most trucks Maintains the factory appearance of your vehicle Use them when you're towing - take them off when you're not Installs and removes easily - no drilling or welding required Slide the center hub onto the shank of your 2-1/2" ball mount or tow bar (sold separately) and tighten it with set screws Durable construction of all components ensures years of service and performance Heavy-duty, 3/8" thick black rubber mudflaps with molded, tear-resistant fabric layer Heavy-gauge, stainless-steel-sleeved support rods with corrosion-resistant coating inside Black powder coated aluminum clamps and stainless steel hardware attach mudflaps to support rods UV-protected, black matte powder coat finish on forged aluminum center hub and arms Mudflaps include polished, stainless steel trim plates with "Rock Tamers" logo Rock Screen (sold separately) helps prevent damage from stones, gravel, and debris while traveling Specs: Application: most SUVs, vans, RVs, full-size or dually trucks with a 2-1/2" x 2-1/2" trailer hitch receiver and ball mount Adjustable width (outside to outside): 67-3/4" to 97-1/4" Mudflap dimensions (each): 24-1/4" long x 23-7/8" wide x 3/8" thick Length can be modified to create a custom fit 1-Year limited warranty Note: To use Rock Tamers, there must be at least 1" of clearance between the back of the ball mount face and the trailer hitch receiver opening.
Get upgraded protection with this adjustable mud flap and rock screen kit. The heavy-duty rubber flaps and rip-stop mesh screen shield your truck and towables from flying rocks, debris, and mud.Features: Protects your truck and towables from damage inflicted by flying, mud, and debris Works great when you're towing a boat; snowmobile; ATV; or 5th-wheel, travel or horse trailer Rubber mats are customizable to your vehicle for a perfect fit and maximum coverage Pre-molded cut lines let you trim the mudflaps to any length Rock screen attaches behind the mudflaps giving an added layer of protection from stones and gravel Vertical adjustment enables you to maintain consistent ground clearance no matter your load Horizontal adjustment of support rods allows the mudflaps to fit the width of most trucks Maintains the factory appearance of your vehicle Installs and removes easily to use them when you're towing and remove them when you're not No drilling or welding required Mounts onto the shank of your 2-1/2" ball mount or tow bar (sold separately) Specs: Application: most SUVs, vans, RVs, full-size or dually trucks with a 2-1/2" x 2-1/2" trailer hitch receiver and ball mount Adjustable width (outside to outside): 67-3/4" to 97-1/4" Mudflap dimensions (each): 24-1/4" long x 23-7/8" wide x 3/8" thick Length can be modified to create a custom fit Screen dimensions: 61" wide x 15-7/8" tall in center, 21-1/2" tall on sides Distance between top corner eyelets of screen: 60" Construction: Mudflaps: 3/8" thick black rubber Support rods: stainless-steel with corrosion-resistant coating Rock screen: rip-stop mesh 1-Year limited warranty on Rock Tamers mudflaps Note: To use Rock Tamers, there must be at least 1" of clearance between the back of the ball mount face and the trailer hitch receiver opening.
Protect your truck and towables from flying rocks and debris with these adjustable mud flaps. The heavy-duty rubber flaps slide onto your ball mount or tow bar, and they adjust horizontally for a custom fit on your vehicle.Features: Protects your truck and towable from damage inflicted by flying rocks and debris Works great when you're towing a boat; snowmobile; ATV; or 5th-wheel, travel or horse trailer Customizable to your vehicle's specification for a perfect fit and maximum coverage Horizontal adjustment allows the mudflaps to fit the width of most trucks Use them when you're towing - take them off when you're not Installs and removes easily - no drilling or welding required Clamping system can be adjusted to fit 2", 2-1/2", and 3" ball mount or tow bar (sold separately) Durable construction of all components ensures years of service and performance Heavy-duty, 5/16" thick rubber mudflaps hold up to hot and frigid temperatures Black aluminum construction is corrosion resistant Specs: Application: most SUVs, vans, RVs, full-size or dually trucks with a 2", 2-1/2", or 3" trailer hitch receiver and ball mount Adjustable width (outside to outside): 76" to 82" Mudflap dimensions (each): 19" long x 18" wide x 5/16" thick Length can be modified to create a custom fit 1-Year limited warranty
Get upgraded protection with this adjustable mud flap and rock screen kit. The heavy-duty rubber flaps and rip-stop mesh screen shield your truck and towables from flying rocks, debris, and mud.Features: Protects your truck and towables from damage inflicted by flying rocks, mud, and debris Works great when you're towing a boat; snowmobile; ATV; or 5th-wheel, travel or horse trailer Rubber mats are customizable to your vehicle for a perfect fit and maximum coverage Pre-molded cut lines let you trim the mudflaps to any length Rock screen attaches behind the mudflaps giving an added layer of protection from stones and gravel Vertical adjustment enables you to maintain consistent ground clearance no matter your load Horizontal adjustment of support rods allows the mudflaps to fit the width of most trucks Maintains the factory appearance of your vehicle Installs and removes easily to use them when you're towing and remove them when you're not No drilling or welding required Mounts onto the shank of your 2" ball mount or tow bar (sold separately) Specs: Application: most SUVs, vans, RVs, full-size or dually trucks with a 2" x 2" trailer hitch receiver and ball mount Adjustable width (outside to outside): 67-1/4" to 96-3/4" Mudflap dimensions (each): 24-1/4" long x 23-7/8" wide x 3/8" thick Length can be modified to create a custom fit Screen dimensions: 61" wide x 15-7/8" tall in center, 21-1/2" tall on sides Distance between top corner eyelets of screen: 60" Construction: Mudflaps: 3/8" thick black rubber Support rods: stainless-steel with corrosion-resistant coating Rock screen: rip-stop mesh 1-Year limited warranty on Rock Tamers mudflaps Note: To use Rock Tamers, there must be at least 1" of clearance between the back of the ball mount face and the trailer hitch receiver opening.
Protect your truck and towables from flying rocks and debris with these fully adjustable mud flaps. The heavy-duty rubber flaps slide onto your ball mount or tow bar, and they adjust horizontally and vertically for a custom fit on your vehicle.Features: Protects your truck and towables from damage inflicted by flying rocks and debris Works great when you're towing a boat; snowmobile; ATV; or 5th-wheel, travel or horse trailer Mounts near the bumper yet far enough away from the rear wheels to provide a wide range of protection Guards against backsplash - channels on the back direct water flow downward Customizable to your vehicle's specifications for a perfect fit and maximum coverage Pre-molded cut lines let you trim the mudflaps to any length Includes punch tool to create bolt holes in mudflaps for attaching installation clamps Vertical adjustment enables you to maintain consistent ground clearance no matter your load Just loosen 2 bolts and rotate arms up or down, then re-tighten bolts to lock arms into place Horizontal adjustment of support rods allows the mudflaps to fit the width of most trucks Maintains the factory appearance of your vehicle Use them when you're towing - take them off when you're not Installs and removes easily - no drilling or welding required Slide the center hub onto the shank of your 2" ball mount or tow bar (sold separately) and tighten it with set screws Durable construction of all components ensures years of service and performance Heavy-duty, 3/8" thick black rubber mudflaps with molded, tear-resistant fabric layer Heavy-gauge, stainless-steel-sleeved support rods with corrosion-resistant coating inside Black powder coated aluminum clamps and stainless steel hardware attach mudflaps to support rods UV-protected, black matte powder coat finish on forged aluminum center hub and arms Includes polished, stainless steel trim plates with "Blue Ox" logo Included rock screen helps prevent damage from stones, gravel, and debris while traveling Specs: Application: most SUVs, vans, RVs, full-size or dually trucks with a 2" x 2" trailer hitch receiver and ball mount Adjustable width (outside to outside): 67-1/4" to 96-3/4" Mudflap dimensions (each): 24-1/4" long x 23-7/8" wide x 3/8" thick Length can be modified to create a custom fit 1-Year limited warranty Note: To use the Blue Ox adjustable mudflap system there must be at least 1" of clearance between the back of the ball mount face and the trailer hitch receiver opening.
Protect your truck and towables from flying rocks and debris with these fully adjustable mud flaps. The heavy-duty rubber flaps slide onto your ball mount or tow bar, and they adjust horizontally for a custom fit on your vehicle.Features: Protects your truck and towables from damage inflicted by flying rocks and debris Works great when you're towing a boat; snowmobile; ATV; or 5th-wheel, travel or horse trailer Mounts near the bumper yet far enough away from the rear wheels to provide a wide range of protection Guards against backsplash - channels on the back direct water flow downward Customizable to your vehicle's specifications for a perfect fit and maximum coverage Pre-molded cut lines let you trim the mudflaps to any length Includes punch tool to create bolt holes in mudflaps for attaching installation clamps Vertical adjustment enables you to maintain consistent ground clearance no matter your load Just loosen 2 bolts and rotate arms up or down, then re-tighten bolts to lock arms into place Horizontal adjustment of support rods allows the mudflaps to fit the width of most trucks Maintains the factory appearance of your vehicle Use them when you're towing - take them off when you're not Installs and removes easily - no drilling or welding required Slide the center hub onto the shank of your 2-1/2" ball mount or tow bar (sold separately) and tighten it with set screws Durable construction of all components ensures years of service and performance Heavy-duty, 3/8" thick black rubber mudflaps with molded, tear-resistant fabric layer Heavy-gauge, stainless-steel-sleeved support rods with corrosion-resistant coating inside Black powder coated aluminum clamps and stainless steel hardware attach mudflaps to support rods UV-protected, black matte powder coat finish on forged aluminum center hub and arms Includes polished, stainless steel trim plates with "Blue Ox" logo Included rock screen helps prevent damage from stones, gravel, and debris while traveling Specs: Application: most SUVs, vans, RVs, full-size or dually trucks with a 2-1/2" x 2-1/2" trailer hitch receiver and ball mount Adjustable width (outside to outside): 67-1/4" to 96-3/4" Mudflap dimensions (each): 24-1/4" long x 23-7/8" wide x 3/8" thick Length can be modified to create a custom fit 1-Year limited warranty Note: To use the Blue Ox adjustable mudflap system there must be at least 1" of clearance between the back of the ball mount face and the trailer hitch receiver opening.
Protect your truck and towables from flying rocks and debris with this adjustable mud flap and rock screen kit. The heavy-duty rubber flaps slide onto your ball mount or tow bar, while the rip-stop mesh screen attaches to the back of the mud flaps.Features: Protects your truck and towables from damage inflicted by flying rocks, mud, and debris Works great when you're towing a boat; snowmobile; ATV; or 5th-wheel, travel or horse trailer Rubber mats are customizable to your vehicle for a perfect fit and maximum coverage Pre-molded cut lines let you trim the mudflaps to any length Rock screen attaches behind the mudflaps giving an added layer of protection from stones and gravel Vertical adjustment enables you to maintain consistent ground clearance no matter your load Horizontal adjustment of support rods allows the mudflaps to fit the width of most trucks Maintains the factory appearance of your vehicle Installs and removes easily to use them when you're towing and remove them when you're not No drilling or welding required Mounts onto the shank of your 3" ball mount or tow bar (sold separately) Specs: Application: most SUVs, vans, RVs, full-size or dually trucks with a 3" x 3" trailer hitch receiver and ball mount Adjustable width (outside to outside): 68-1/4" to 97-3/4" Mudflap dimensions (each): 24-1/4" long x 23-7/8" wide x 3/8" thick Length can be modified to create a custom fit Screen dimensions: 61" wide x 15-7/8" tall in center, 21-1/2" tall on sides Distance between top corner eyelets of screen: 60" Construction: Mudflaps: 3/8" thick black rubber Support rods: stainless-steel with corrosion-resistant coating Rock screen: rip-stop mesh 1-Year limited warranty on Rock Tamers mudflaps Note: To use Rock Tamers, there must be at least 1" of clearance between the back of the ball mount face and the trailer hitch receiver opening.
Protect your towed vehicle from nicks and dings with the RoadWing mud flap system. Its anti-sail design keeps the flaps down where they belong, shielding your car from flying road debris as you tow it.Features: Mudflaps prevent your towing vehicle from kicking up too much debris Protects your towed vehicle, trailer and other cars on the road Anti-sail design helps flaps stay down to deflect more Double-bolt attachment points keep the RoadWing in place and level Grooved interior channels knock debris down and away from your vehicle Easy installation - slide over ball mount or tow bar stinger and attach with bolts Mudflaps can be trimmed to fit nearly any application Made in the USA Specs: Application: 2" x 2" trailer hitch receivers RoadWing width: 91" - 102" Flap dimensions: 36" wide x 24" tall
Protect your towed vehicle from nicks and dings with the RoadWing mud flap system. Its anti-sail design keeps the flaps down where they belong, shielding your car from flying road debris as you tow it. Designed for midsize trucks and SUVs.Features: Mudflaps prevent your towing vehicle from kicking up too much debris Protects your towed vehicle, trailer and other cars on the road Anti-sail design helps flaps stay down to deflect more Double-bolt attachment points keep the RoadWing in place and level Grooved interior channels knock debris down and away from your vehicle Easy installation - slide over ball mount or tow bar stinger and attach with bolts Mudflaps can be trimmed to fit nearly any application Made in the USA Specs: Application: 2" x 2" trailer hitch receivers RoadWing width: 73" Flap dimensions: 24" x 24"
This ball mount uses bumper-stop technology to reduce road shock and provide a more comfortable towing experience. The 12K-rated, channel-style ball mount offers 8" of adjustability, allowing you to tow trailers of various heights.Features: Shock-absorbing ball mount uses twin bump stops to dampen road shock Channel-style ball mount includes cushioned draw bar attachment with 1" hole to accomodate a variety of towing needs Perfect for towing hay wagons, anhydrous tanks, and other farm applications Works with all Shocker Hitch ball mounts and attachments, including standard mount, drop mount, pintle hook, and more (all sold separately) Grade 50 steel plate construction and cold-rolled steel shank provide maximum durability XRC is shot blasted and powder coated to prevent rust; draw bar is zinc plated 2 Easy-to-remove ball mount pins included Large rings are easy to grasp - no more fumbling with small hitch pin heads Large safety clips make securing clips effortless Can accomodate hitchmountedmudflaps Made in the USA Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Frame is rated for a gross towing weight of 12,000 lbs Maximum Rise: 4" Maximum Drop: 4" Color: Shocker red and black Overall height: 10" Distance from center of hitch pin hole to front of adjustment shank: 8" Hitch pin hole diameters: 5/8" Distance between vertical adjustment holes: 1" Inside width of channel: 3-3/4" 1-Year warranty Note: Drawbar attachment has no tongue weight rating - it is not designed to be used with a hitch ball
Replaces the center hub for Rock Tamers heavy-duty, adjustable mud flap system for 2-1/2" hitches (ERT00110). Side arms (ERT039 and ERT040) and clamp bolts (ERT052) sold separately.
Replaces the center hub for Rock Tamers heavy-duty, adjustable mud flap system for 2" hitches (ERT00108). Side arms (ERT039 and ERT040) and clamp bolts (ERT052) sold separately.
Replaces the ball mount clamp bolt for Rock Tamers heavy-duty, adjustable mudflap system for 2" (ERT00108), 2-1/2" (ERT00110) or 3" hitches (00112). ... Features: Replaces the ball mount clamp bolt for Rock Tamers heavy-duty, adjustable mudflap system 2" (ERT00108), 2-1/2" (ERT00110) or 3" hitches (00112) Holds the center hub (ERT057, ERT034, or RT059 - sold separately) in place on your ball mount Quantity: 1 replacement bolt
Replaces the center hub for Rock Tamers heavy-duty, adjustable mud flap system for 3" hitches (RT54FR). Side arms (ERT039 and ERT040) and clamp bolts (ERT052) sold separately.
This ball mount uses bumper-stop technology to reduce road shock and provide a more comfortable towing experience. The 12K-rated, channel-style ball mount offers 7" of adjustability, allowing you to tow trailers of various heights.Features: Shock-absorbing ball mount uses twin bump stops to dampen road shock Channel-style ball mount includes draw bar attachment with 1" hole that accomodates a variety of towing needs Perfect for towing hay wagons, anhydrous tanks, and other farm applications Base frame works with all Shocker Hitch ball mounts and attachments, including standard mount, drop mount, pintle hook, and more (all sold separately) Grade 50 steel plate construction and cold-rolled steel shank provide maximum durability Shot blasted and powder coated to prevent rust 2 Easy-to-remove ball mount pins included Large rings are easy to grasp - no more fumbling with small hitch pin heads Large safety clips make securing clips effortless Can accomodate hitchmountedmudflaps Made in the USA Specs: Application: 2" x 2" trailer hitch receivers Gross towing weight: 12,000 lbs Tongue weight: 1,200 lbs Rise: 4" Drop: 4" Color: Shocker red and black Hitch pin hole diameters: 5/8" Distance between vertical adjustment holes: 1" Inside width of channel: 3-3/4" 1-Year warranty Note: Drawbar attachment has no tongue weight rating - it is not designed to be used with a hitch ball
This ball mount uses bumper-stop technology to reduce road shock and provide a more comfortable towing experience. The 12K-rated, channel-style ball mount offers 7" of adjustability, allowing you to tow trailers of various heights.Features: Shock-absorbing ball mount uses twin bump stops to dampen road shock Channel-style ball mount includes cushioned draw bar attachment with 1" hole to accomodate a variety of towing needs Perfect for towing hay wagons, anhydrous tanks, and other farm applications Works with all Shocker Hitch ball mounts and attachments, including standard mount, drop mount, pintle hook, and more (all sold separately) Grade 50 steel plate construction and cold-rolled steel shank provide maximum durability XRC is shot blasted and powder coated to prevent rust; draw bar is zinc plated 2 Easy-to-remove ball mount pins included Large rings are easy to grasp - no more fumbling with small hitch pin heads Large safety clips make securing clips effortless Can accomodate hitchmountedmudflaps Made in the USA Specs: Application: 2" x 2" trailer hitch receivers Gross towing weight: 12,000 lbs Rise: 4" Drop: 4" Color: Shocker red and black Overall height: 10" Distance from center of hitch pin hole to front of adjustment shank: 8" Hitch pin hole diameters: 5/8" Distance between vertical adjustment holes: 1" Inside width of channel: 3-3/4" 1-Year warranty
This custom-fit mudflap protects your towed vehicle or trailer from road debris. It's longer and thicker than a non-commercial grade mud flap and provides full bumper coverage. Remove lynch pins to detach mudflap when not in use.
Filters
