Grease cap fits EZ Lube and Easy Grease trailer hubs with 2.72" inner diameter. Rubber plug is included.Features: Grease cap for EZ Lube and Easy Grease trailer hubs Includes rubber plug 22-Gauge, zinc-coated steel construction Drive-in installation Specs: Outer diameter: 2.72" Quantity: 1
Grease cap fits EZ Lube and Easy Grease trailer hubs with 2.72" inner diameter.Features: Grease cap for EZ Lube and Easy Grease trailer hubs Requires rubber plug (DC-RP sold separately) 22-Gauge, zinc-coated steel construction Drive-in installation Specs: Outer diameter: 2.72" Quantity: 1
... Designed for Dexter 7" and 10" x 1-1/4" hubs. Includes 2 caps.Features: EZ Lube grease caps seal your hub and let you easily add grease through your EZ Lube axle spindle Rubber plug keeps grease in and helps block dirt, water, and debris Drive-in installation makes it easy to secure the cap into your hub bore Made in the USA Specs: Quantity: 2 Flange diameter (outer diameter): 1.99" Application: Fits Dexter 7" and 10" x 1-1/4" hubs with EZ Lube spindles
These 2.72" OD EZ Lube grease caps seal your Dexter hub and let you add grease through the spindle. Zinc-plated steel resists rust. Designed for 12" x 2" Dexter hubs with 8-bolt pattern. ... Features: Grease caps let you add grease through EZ Lube spindles while sealing out water and debris Includes removable rubber plugs for access to zerk fittings Corrosion-resistant zinc plating and 22-gauge steel hold up to harsh road conditions Drive-in installation makes it easy to seat each cap securely Made in the USA Specs: Quantity: 2 Flange diameter (outer diameter): 2.72" Overall height: 1.28" Application: Fits Dexter 12" x 2" hubs with 8-bolt pattern and EZ Lube spindles
Drive-in grease cap keeps debris off of your wheel bearings. For use with Nev-R-Lube axles.Features: Grease cap keeps dirt and debris from getting on your wheel bearings Zinc plating resists corrosion 20-gauge steel construction Drive-in installation Made in the USA Specs: Application: Dexter 50mm Nev-R-Lube axles with 12" x 2" drums Outer diameter: 3.355" Flange length: 0.56" Cap height: 1.3"
From open highways to tough job sites, this aluminum cap delivers waterproof protection you can trust. One look through the clear lens shows your oil or grease level so you know you're ready to go further without worry.Features to know about Fits a Range of Axles, Replaces Existing Oil Caps Replaces the oil bath/grease cap, O-ring, and plug on these axles/brakes: 6K, 7K, or 8K 8-bolt axles Dexter 6K and 8K axles with screw in caps Dexter 9K axles manufactured before 10/1989 Lippert 8K axles Kodiak 8K hub-and-rotor disc brake kit Cap is a direct replacement for these oil caps: Dexter: 21-35 or K71-038-00, or 021-029-00 Lippert: 695814 or 700266 Kodiak: 8001 Seals Out Water For Good Say goodbye to leaks, milky oil, and all the headaches that come with water finding its way into your hub.
From open highways to tough job sites, this aluminum cap delivers waterproof protection you can trust. One look through the clear lens shows your oil or grease level so you know you're ready to go further without worry.Features to know about Fits a Range of Axles, Replaces Existing Oil Caps Replaces the oil bath/grease cap, O-ring, and plug on these axles: 9K axles manufactured after October 1, 1989 10K axles 12K & 15K heavy-duty axlesCap is a direct replacement for these Dexter or Valcrum oil caps: Dexter: 21-36, 21-036, or K71-148-00 caps Valcrum: ST-400 caps manufactured after 08/2019 Seals Out Water For Good Say goodbye to leaks, milky oil, and all the headaches that come with water finding its way into your hub.
From open highways to tough job sites, this aluminum cap delivers waterproof protection you can trust. One look through the clear lens shows your oil or grease level so you know you're ready to go further without worry.Features to know about Fits a Range of Axles, Replaces Existing Oil Caps Replaces the oil bath/grease cap, O-ring, and plug on these axles/drums: Dexter 9K-10K GD axles manufactured after 7/2009 Dexter #13G drums manufactured after 7/2009 Cap is a direct replacement for these Dexter oil caps: Dexter: 21-88 or K71-704-00 Seals Out Water For Good Say goodbye to leaks, milky oil, and all the headaches that come with water finding its way into your hub.
From open highways to tough job sites, this aluminum cap delivers waterproof protection you can trust. One look through the clear lens shows your oil or grease level so you know you're ready to go further without worry.Features to know about Fits a Range of Axles, Replaces Existing Oil Caps Replaces the oil bath/grease cap, O-ring, and plug on these axles: Lippert 10K to 16K axlesCap is a direct replacement for these Lippert, Dexter or Valcrum oil caps: Lippert: 693935 Dexter: 21-36, 21-036, or K71-148-00 Valcrum: ST-400 manufactured after 08/2019 Seals Out Water For Good Say goodbye to leaks, milky oil, and all the headaches that come with water finding its way into your hub.
From open highways to tough job sites, this aluminum cap delivers waterproof protection you can trust. One look through the clear lens shows your oil or grease level so you know you're ready to go further without worry.Features to know about Fits a Range of Axles, Replaces Existing Oil Caps Replaces the oil bath/grease cap, O-ring, and plug on these axles: AL-KO, Hayes, QRG, or Rockwell 9K-16K axles manufactured after 1996 Cap is a direct replacement for these oil caps: AL-KO: 1531029 Dexter: K71-859-00 Hayes: K568220 Rockwell: 12011-1 Seals Out Water For Good Say goodbye to leaks, milky oil, and all the headaches that come with water finding its way into your hub.
Replace the oil/grease cap, O-ring, and plug on your Dexter, Lippert, or Kodiak axle/hub. Aluminum alloy body dissipates heat and magnetic vent plug removes damaging metal flecks. ... Features: Replaces the oil bath/grease cap, O-ring, and plug on these axles or disc brake kit: 6K, 7K, and 8K 8-bolt axles Dexter 6K and 8K axles with screw in caps Dexter 9K axles (before 10/1989) Lippert 8K axles Kodiak 8K hub-and-rotor disc brake kit Direct replacement for these Dexter, Kodiak, and Lippert oil caps: Dexter: 21-35, K71-038-00, or 021-029-00 Lippert: 695814 or 700266 Kodiak: 8001 Cap functions as either an oil bath or grease cap Magnetic vent plug attracts damaging metal particles Helps identify problems before they become critical Anodized aluminum alloy with clear finish resists corrosion Clear viewing lens lets you quickly check oil level Easy-to-access side port lets you fill or drain lubricant without removing the cap O-ring and gasket provide a tight seal Threaded cap installs easily Includes 1 cap, 1 watertight O-ring seal, and 1 magnetic vent plug Specs: Applications: 6,000-lb to 9,000-lb axles and Kodiak 8K hub-and-rotor disc brake kit Thread outer diameter: 2.875" 5-Year limited warranty
Replace the oil/grease cap, O-ring, and plug on your Dexter, Lippert, or Kodiak axle/hub. Aluminum alloy body dissipates heat and magnetic vent plug removes damaging metal flecks. ... Features: Replaces the oil bath/grease cap, O-ring, and plug on these axles or disc brake kit: 6K, 7K, and 8K 8-bolt axles Dexter 6K and 8K axles with screw in caps Dexter 9K axles (before 10/1989) Lippert 8K axles Kodiak 8K hub-and-rotor disc brake kit Direct replacement for these Dexter, Kodiak, and Lippert oil caps: Dexter: 21-35, K71-038-00, or 021-029-00 Lippert: 695814 or 700266 Kodiak: 8001 Cap functions as either an oil bath or grease cap Magnetic vent plug attracts damaging metal particles Helps identify problems before they become critical Aluminum alloy body with black e-coat finish resists corrosion Clear viewing lens lets you quickly check oil level Easy-to-access side port lets you fill or drain lubricant without removing the cap O-ring and gasket provide a tight seal Threaded cap installs easily Includes 1 cap, 1 watertight O-ring seal, and 1 magnetic vent plug Specs: Applications: 6,000-lb to 9,000-lb axles and Kodiak 8K hub-and-rotor disc brake kit Thread outer diameter: 2.875" 5-Year limited warranty
Upgrade to the Dexter Fortress oil cap kit for secure hub sealing and easy maintenance. Designed for 9K to 12K axles, this bolt-on cap includes plug, and works with both oil and grease lubrication systems.Highlights Seals hub face: Rubber O-ring keeps oil contained and contaminants out Side-fill plug: Threaded fill/drain port makes service easier without removing the cap Lens protection: Retainer ring helps shield the clear viewing lens from impact and debris Bolt-on installation: Six-bolt flange secures the cap directly to the hub - hardware sold separately Compatible with oil or grease: Cap functions with both lubrication types Specs Fits: Dexter 9K12K axlesAxle models: 13G, 13D, 14, 14T, D90, D100G, D100, D120 Includes: Kit contents: (1) Fortress bolt-on aluminum oil cap (1) Side oil fill plug (1) Dexter logo rubber plug Construction: Material and finish: Black-coated cast aluminum cap Clear viewing lens with reinforced retainer ring Threaded port with removable plug
If you're replacing a worn or missing cap, this one keeps your hub sealed up and protected. The lube-style design makes it easy to add grease without pulling everything apart, helping you keep your bearings in good shape.Features: Dust cap provides protection for trailer hub by helping keep grease in and contaminants out Lube-style design allows easy access for adding grease without removing the cap Compatibility designed for use with 2K to 4.4K trailer axles 2" Diameter fits matching hub bore size Quantity includes 1 dust cap
If you're replacing a worn or missing cap, this one keeps your hub sealed up and protected. The lube-style design makes it easy to add grease without pulling everything apart, helping you keep your bearings in good shape.Features: Dust cap provides protection for trailer hub by helping keep grease in and contaminants out Lube-style design allows easy access for adding grease without removing the cap Compatibility designed for use with 7K to 8K trailer axles 2.75" Diameter fits matching hub bore size Quantity includes 1 dust cap
Replace the grease cap, O-ring, and plug on your Dexter, Lippert, or Kodiak axle/hub. Aluminum alloy body dissipates heat and magnetic vent plug removes damaging metal particles. ... Features: Replaces the grease cap, O-ring, and plug on these axles or disc brake kit: 6K, 7K, and 8K 8-bolt axles Dexter 6K and 8K axles with screw in caps Dexter 9K axles (before 10/1989) Lippert 8K axles Kodiak 8K hub-and-rotor disc brake kit Direct replacement for these Dexter, Kodiak, and Lippert oil caps: Dexter: 21-35, K71-038-00, or 021-029-00 Lippert: 695814 or 700266 Kodiak: 8001 Magnetic vent plug attracts damaging metal particles Helps identify problems before they become critical Anodized aluminum alloy with clear finish resists corrosion O-ring and gasket provide a tight seal Threaded cap installs easily Includes 1 cap, 1 watertight O-ring seal, and 1 magnetic vent plug Specs: Applications: 6,000-lb to 9,000-lb axles and Kodiak 8K hub-and-rotor disc brake kit Thread outer diameter: 2.875" 5-Year limited warranty
If you're replacing a worn or missing cap, this one keeps your hub sealed up and protected. The lube-style design makes it easy to add grease without pulling everything apart, helping you keep your bearings in good shape.Features: Dust cap provides protection for trailer hub by helping keep grease in and contaminants out Lube-style design allows easy access for adding grease without removing the cap Compatibility designed for use with 5K to 6K trailer axles 2.5" Diameter fits matching hub bore size Quantity includes 1 dust cap
Replaces 1 oil cap, O-ring, and plug for the oil bath hub on your 7,000-lb to 9,000-lb axle.Features: Fits oil bath hubs on 7,000-lb to 9,000-lb trailer axles Includes threaded cap, yellow plug, and O-ring Threaded diameter: 2-7/8"
Install this hub-and-drum assembly on your trailer. Fits 5,200-lb to 7,000-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Pre-greased hub is easy to install - no need to pack bearings E-Z Lube-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included Hub and drum are made in the USA Specs: Application: 5,200-lb to 7,000-lb E-Z Lube trailer axles with #42 spindles Drum dimensions: 12" diameter x 2" wide Works with 12" brake assembly Bolt pattern: 8 on 6-1/2" Grease cap flange diameter: 2.72" Wheel stud diameter: 1/2" Weight capacity: 3,500 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 14125A (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 14276 Grease seal (included): GS-2250DL Inner diameter: 2.25" Outer diameter: 3.376" E-Z Lube-Compatible Assembly for Simple Lubrication The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy.
This hub-and-drum assembly fits 7,000-lb E-Z Lube axles with #42 spindles. Compatible with electric and hydraulic brakes. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and cone nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes E-Z Lube-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Bearings, races, grease seal, grease cap, wheel bolts, and 90-degree cone nuts are included Hub and drum are made in the USA Specs: Application: 7,000-lb E-Z Lube axles with #42 spindles Wheel size: 16" to 17-1/2" Drum dimensions: 12" diameter x 2" wide Works with 12" electric and hydraulic brake assemblies Bolt pattern: 8 on 6-1/2" Grease cap flange diameter: 2.72" Wheel stud diameter: 9/16"-18 Weight capacity: 3,500 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing : 25580 (1.750" inner diameter) Outer bearing: 14125A (1.250" inner diameter) Races (included) Inner race: 25520 Outer race: 14276 Grease seal (included): GS-2250DL Outer diameter: 3.376" Inner diameter: 2.25" E-Z Lube-Compatible Hub for Simple Lubrication The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy.
Shuddering brakes, trailer sway, or grinding under load? Worn drums and bearings put safety at risk. An ABS-ready hub built for Dexter's Tow Assist restores smooth braking, steady tracking, and the peace of mind to tow without second-guessing.Highlights: ABS-Ready Hub and Drum: Direct replacement uses your existing sensor to work with Dexter's ABS Tow Assist system. For 7K Axles: Sized for ABS axles with a 2.25" I.D. seal, and bearings 14125A and 25580.
Shuddering brakes, trailer sway, or grinding under load? Worn drums and bearings put safety at risk. An ABS-ready hub built for Dexter's Tow Assist restores smooth braking, steady tracking, and the peace of mind to tow without second-guessing.Highlights: ABS-Ready Hub and Drum: Direct replacement includes integrated sensor to work with Dexter's ABS Tow Assist system. For 7K ABS Axles: Sized for ABS axles with a 2.25" I.D. seal, and bearings 14125A and 25580.
Straight trailer axle measures 95" from hub face to hub face and 80" from spring center to spring center. Includes idler hubs - with bearings, races, and seals - for 13" to 15" wheels. ... Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires Best for straight-line acceleration and steady, controlled towing Underslung design - spring seats welded to underside of axle for mounting leaf springs Low ride height makes it easier to load and unload your trailer Straight, E-Z Lube spindles - no drop Built-in grease zerks for simple lubrication Spring seats and spindles are welded on Cast iron idler hubs are sturdy and durable Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included Made in the USA Specs: Weight capacity: 3,500 lbs Hub-face-to-hub-face length: 95" Spring-center-to-spring-center length: 80" Hub bolt pattern: 5 on 4-1/2" Axle tubing outer diameter: 2-3/8" Grease cap outer diameter: 1.986" Wheel stud diameter: 1/2" Wheel size: 13" - 15" Limited 5-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Axle Dimensions There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate.
Filters
