Swap worn springs with this CE Smith 24-5/8" slipperleafspring. Built to handle 250-lb loads, it's perfect for light-duty trailers. Features 1-leaf steel construction, 1-3/4" width, and eye-radius end for 1/2" shackle bolt fit.Features: Replace a worn or broken trailer spring with this CE Smith slipper-style leafspring Great fit for small trailers hauling light loads up to 250 lbs Slipper design with eye-radius end installs with 1/2" shackle bolt (sold separately) Measures 24-5/8" from center of eye to end of slipper for easy size matching Single-leafspring is 1-3/4" wide and 4-1/2" tall for reliable low-profile support Durable steel construction resists flex fatigue and road wear Weighs just 4 lbs - light enough for easy install, strong enough for steady towing Specs: Quantity: 1 leafspringSpring capacity: 250 lbs Axle capacity: 500 lbs Length from center of spring eye to end of spring (unloaded): 24-5/8" Spring width: 1-3/4" Eye diameter: 1/2" Leaf thickness: 3/8" Number of leaves: 1 End style: Eye-radius Spring weight: 4 lbs
... Upgrade your suspension with this long-lasting, supremely rust-resistant slipperleafspring.Features: Leafspring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Nylon bushing included Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Eye of spring attaches to hanger mounted on trailer frame Slipper end slides into hanger or equalizer Dacromet finish provides superior rust resistance Salt spray rating 700 hours at 5% salinity Specs: Quantity: 1 leafspringLeafsprings should always be replaced in pairs to ensure proper axle alignment Spring capacity: 2,150 lbs Axle capacity: 4,300 lbs Length from center of spring eye to end of spring: 26-1/4" Spring width: 1-3/4" Eye diameter with bushing: 9/16" Eye diameter without bushing: 1" Leaf thickness: 3/8" Number of leaves: 4 Additional dimensions: see table Limited lifetime warranty Part Number A B C D E F e33SR 13-1/8" 26-1/2" 26-1/4" 13-3/4" 14-1/8" 3-1/2" If you're replacing a busted or rusted-out spring on your trailer - or if you've decided to upgrade to dacromet to avoid rusted-out springs down the line - the first thing you'll need to do is measure your existing leafsprings.
Slipperleafspring acts as part of a trailer's suspension system by providing an attachment point for a 4,300-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... Features: Leafspring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Nylon bushing included Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Eye of spring attaches to hanger mounted on trailer frame Slipper end slides into hanger or equalizer Specs: Quantity: 1 leafspringSpring capacity: 2,150 lbs Axle capacity: 4,300 lbs Length from center of spring eye to center of open spring eye (unloaded): 26-1/4" Spring width: 1-3/4" Eye diameter with bushing: 9/16" Eye diameter without bushing: 1" Leaf thickness: 3/8" Number of leaves: 4 Additional dimensions: see table Part Number A B C D E F e24SR 13-1/8" 27" 26-1/4" 13-3/4" 14-1/8" 3-1/2" Note: To ensure proper axle alignment and suspension performance, leafsprings should always be replaced in pairs.
USA-made slipperleafspring acts as part of your trailer's suspension system providing an attachment point for a 4,700-lb axle. Spring flexes to resist shock while ensuring a smooth ride. ... The shape of the slipper end of a leafspring may vary slightly due to differences among trailer manufacturers. Because of this, it's important to check your leafspring's slipper end before purchasing a replacement spring.
USA-made slipperleafspring acts as part of your trailer's suspension system providing an attachment point for a 4,300-lb axle. Spring flexes to resist shock while ensuring a smooth ride. ... The shape of the slipper end of a leafspring may vary slightly due to differences among trailer manufacturers. Because of this, it's important to check your leafspring's slipper end before purchasing a replacement spring.
USA-made slipperleafspring acts as part of your trailer's suspension system providing an attachment point for a 2,000-lb axle. Spring flexes to resist shock while ensuring a smooth ride. ... The shape of the slipper end of a leafspring may vary slightly due to differences among trailer manufacturers. Because of this, it's important to check your leafspring's slipper end before purchasing a replacement spring.
Slipperleafspring acts as part of a trailer's suspension system by providing an attachment point for a 4,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... The shape of the slipper end of a leafspring may vary slightly due to differences among trailer manufacturers. Because of this, it's important to check your leafspring's slipper end before purchasing a replacement spring.
Slipperleafspring acts as part of a trailer's suspension system by providing an attachment point for a 2,500 lbs axle. Spring flexes to resist shock and also ensures a smooth ride. ... The shape of the slipper end of a leafspring may vary slightly due to differences among trailer manufacturers. Because of this, it's important to check your leafspring's slipper end before purchasing a replacement spring.
Slipperleafspring acts as part of a trailer's suspension system by providing an attachment point for a 3,700-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... The shape of the slipper end of a leafspring may vary slightly due to differences among trailer manufacturers. Because of this, it's important to check your leafspring's slipper end before purchasing a replacement spring.
Slipperleafspring acts as part of a trailer's suspension system by providing an attachment point for a 2,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... The shape of the slipper end of a leafspring may vary slightly due to differences among trailer manufacturers. Because of this, it's important to check your leafspring's slipper end before purchasing a replacement spring.
USA-made 3-leafslipperspring is 24-1/4" long x 1-3/4" wide. It is designed for use on trailers with 1,500-lb axles.Leafsprings are an integral part of your trailer suspension system. The slipperspring is suspended at one end by a hanger that attaches to the eye.
USA-made 2-leafslipperspring is 24-1/4" long x 1-3/4" wide. It is designed for use on trailers with 1,000-lb axles.Leafsprings are an integral part of your trailer suspension system. The slipperspring is suspended at one end by a hanger that attaches to the eye.
Slipperleafspring acts as part of a trailer's suspension system by providing an attachment point for a 2,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... The shape of the slipper end of a leafspring may vary slightly due to differences among trailer manufacturers. Because of this, it's important to check your leafspring's slipper end before purchasing a replacement spring.
Slipperleafspring acts as part of a trailer's suspension system by providing an attachment point for a 2,900-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... The shape of the slipper end of a leafspring may vary slightly due to differences among trailer manufacturers. Because of this, it's important to check your leafspring's slipper end before purchasing a replacement spring.
USA-made slipperleafspring acts as part of your trailer's suspension system providing an attachment point for a 1,000-lb axle. Spring flexes to resist shock while ensuring a smooth ride. ... The shape of the slipper end of a leafspring may vary slightly due to differences among trailer manufacturers. Because of this, it's important to check your leafspring's slipper end before purchasing a replacement spring.
Slipperleafspring acts as part of a trailer's suspension system by providing an attachment point for a 6,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... The shape of the slipper end of a leafspring may vary slightly due to differences among trailer manufacturers. Because of this, it's important to check your leafspring's slipper end before purchasing a replacement spring.
Slipperleafspring acts as part of a trailer's suspension system by providing an attachment point for a 1,500-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... The shape of the slipper end of a leafspring may vary slightly due to differences among trailer manufacturers. Because of this, it's important to check your leafspring's slipper end before purchasing a replacement spring.
USA-made slipperleafspring acts as part of your trailer's suspension system providing an attachment point for a 1,800-lb axle. Spring flexes to resist shock while ensuring a smooth ride. ... The shape of the slipper end of a leafspring may vary slightly due to differences among trailer manufacturers. Because of this, it's important to check your leafspring's slipper end before purchasing a replacement spring.
USA-made slipperleafspring acts as part of your trailer's suspension system providing an attachment point for a 1,500-lb axle. Spring flexes to resist shock while ensuring a smooth ride. ... The shape of the slipper end of a leafspring may vary slightly due to differences among trailer manufacturers. Because of this, it's important to check your leafspring's slipper end before purchasing a replacement spring.
Slipperleafspring acts as part of a trailer's suspension system by providing an attachment point for a 1,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... The shape of the slipper end of a leafspring may vary slightly due to differences among trailer manufacturers. Because of this, it's important to check your leafspring's slipper end before purchasing a replacement spring.
Slipperleafspring acts as part of a trailer's suspension system by providing an attachment point for a 1,500-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... The shape of the slipper end of a leafspring may vary slightly due to differences among trailer manufacturers. Because of this, it's important to check your leafspring's slipper end before purchasing a replacement spring.
Hangers suspend leafsprings from the frame of your tandem-axle trailer. Designed to be used with either equalizer kit AP202 or AP216. Front hangers are 4-1/4" tall. ... Features: Attach 4leafsprings (sold separately) to your trailer frame Use table below to determine hanger location (when used with AP202 or AP216) based on type of leafsprings Achieve 4-3/4", 5" or 5-1/4" clearance between trailer frame and axle, depending on axle size Include: (2) 4-1/4" Tall front hangers (28-1) (2) 3-1/2" Tall center hangers (29-1) (2) 5-1/4" Tall rear hangers (30-28) Use in conjunction with either AP202 or AP216 for complete kit AP202 and AP216 contain equalizers, bolts and shackle straps Designed for use on trailers with tandem, 3,500-lb to 8,000-lb axles Does not include components for mounting axle to springs When used with AP202: LeafSprings A - Distance Between Front and Center Hangers B - Distance Between Center and Rear Hangers C - Distance Between U-Bolts D - Distance Between Center of Axle and Trailer Frame Axle Diameter 803T3, 1203T3, 1403T3 28-3/4" 28-3/4" 33-1/2" 5-1/4" 3" (typical 5,200-lb to 7,200-lb trailer axle) E5226 29-3/4" 29-3/4" 34-1/2" 5" 3" (typical 5,200-lb to 7,200-lb trailer axle) E5115 32-1/2" 32-1/2" 36-3/4" 4-3/4" 3" (typical 5,200-lb to 7,200-lb trailer axle) When used with AP216: LeafSprings A - Distance Between Front and Center Hangers B - Distance Between Center and Rear Hangers C - Distance Between U-Bolts D - Distance Between Center of Axle and Trailer Frame Axle Diameter 803T3, 1203T3, 1403T3 30-1/2" 30-1/2" 36" 5" 3" (typical 5,200-lb to 7,200-lb trailer axle) E5226 31-1/2" 31-1/2" 37" 5" 3" (typical 5,200-lb to 7,200-lb trailer axle) E5115 33-3/4" 33-3/4" 39" 5" 3" (typical 5,200-lb to 7,200-lb trailer axle)
This leafspring suspension kit prevents shock transfer between axles, increasing traction while braking by as much as 70 percent. Heavy-duty shocks reduce bouncing, chucking and porpoising of your trailer up to 50 percent. ... Features: Suspension upgrade system provides a smooth, comfortable towing experience Slipperleafsprings replace existing leafsprings Center hanger boxes replace standard equalizers Heavy-duty gas shocks absorb road vibration Center hanger boxes isolate leafsprings to prevent shock transfer between axles Independent axle operation increases traction by as much as 70 percent during braking Built-in rollers keep spring ends from hopping inside of box to create a smoother, quieter, more controlled ride Nitrogen-charged shock absorbers help to eliminate trailer bouncing, chucking, and porpoising Limit up-and-down motion of trailer on both compression and rebound Help to control trailer sway by limiting lateral movement Maintenance-free Never Fail bushings come pressed into spring eyes Constructed with molybdenum and graphite More durable than brass or nylon Simple, bolt-on installation Specs: Application: tandem-axle trailers Axle size: 2-3/8" diameter (typical 3,500-lb axle) Spring capacity: 2,500 lbs per springLeafspring dimensions: 27" long (from center of spring eye to end of spring) x 2" wide Eye diameter with bushing installed: 3/4" (9/16" without bushing) Leaf thickness: 3/8" Number of leaves: 4 Shock length: Extended 17-1/2" Compressed: 11-1/2" Quantity: Slippersprings: 4 Center hanger boxes: 2 Shocks: 4 Limited Lifetime Warranty Note: Your existing U-bolts may not be long enough for this install.
Slipperleafspring acts as part of a trailer's suspension system by providing an attachment point for an 8,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... The shape of the slipper end of a leafspring may vary slightly due to differences among trailer manufacturers. Because of this, it's important to check your leafspring's slipper end before purchasing a replacement spring.
Filters
