Buying wrap by the roll? These 2x4 endcaps finish off your bunks with a clean look. Includes 24 black caps - great for trailer pros and marine shops handling multiple projects. ... It's the ideal companion for bulk wrap rolls, giving every bunk a clean edge that looks polished and protects bunk boards from wear. Fits Standard 2x4 Boards These endcaps are molded to fit 2x4 bunk boards and help seal off the open ends to prevent splintering and water intrusion.
A boat that refuses to slide is enough to ruin a good morning of fishing. Cutting drag with every launch, this low-maintenance bunk wrap lets your boat glide smoothly off and on your trailer, giving you more time on the water than at the ramp.And if there's a little overlap when you wrap it around your boards, it trims easily for a perfect fit. Specs Application: Fits two 2x4 bunk boards Dimensions: Wrap: 9-1/8" wide x 24' long End Cap: 3-3/4" wide x 1-5/8" tall Color: Light gray Includes: 24' bunk wrap roll, 4 endcaps, and stainless steel mounting hardware Warranty: Limited lifetime warranty
A boat that refuses to slide is enough to ruin a good morning of fishing. Cutting drag with every launch, this low-maintenance bunk wrap lets your boat glide smoothly off and on your trailer, giving you more time on the water than at the ramp.And if there's a little overlap when you wrap it around your boards, it trims easily for a perfect fit. Specs Application: Fits two 2x4 bunk boards Dimensions: Wrap: 9-1/8" wide x 24' long End Cap: 3-3/4" wide x 1-5/8" tall Color: Light gray Includes: 24' bunk wrap roll, 4 endcaps, and stainless steel mounting hardware Warranty: Limited lifetime warranty
A boat that refuses to slide is enough to ruin a good morning of fishing. Cutting drag with every launch, this low-maintenance bunk wrap lets your boat glide smoothly off and on your trailer, giving you more time on the water than at the ramp.And if there's a little overlap when you wrap it around your boards, it trims easily for a perfect fit. Specs Application: Fits two 2x4 bunk boards Dimensions: Wrap: 9-1/8" wide x 16' long End Cap: 3-3/4" wide x 1-5/8" tall Color: Black Includes: 16' bunk wrap roll, 4 endcaps, and stainless steel mounting hardware Warranty: Limited lifetime warranty
A boat that refuses to slide is enough to ruin a good morning of fishing. Cutting drag with every launch, this low-maintenance bunk wrap lets your boat glide smoothly off and on your trailer, giving you more time on the water than at the ramp.And if there's a little overlap when you wrap it around your boards, it trims easily for a perfect fit. Specs Application: Fits two 2x4 bunk boards Dimensions: Wrap: 9-1/8" wide x 16' long End Cap: 3-3/4" wide x 1-5/8" tall Color: Light gray Includes: 16' bunk wrap roll, 4 end caps, and stainless steel mounting hardware Warranty: Limited lifetime warranty
Buying wrap by the roll? These 2x4 endcaps finish off your bunks with a clean look. Includes 24 light gray caps - great for trailer pros and marine shops handling multiple projects. ... It's the ideal companion for bulk wrap rolls, giving every bunk a clean edge that looks polished and protects bunk boards from wear. Fits Standard 2x4 Boards These endcaps are molded to fit 2x4 bunk boards and help seal off the open ends to prevent splintering and water intrusion.
... Perfect for single-trailer installs or replacements. Designed for 2x4 boards and pairs with Caliber bunk wrap. Hardware not included.They pair perfectly with Caliber wrap and give your setup a smooth, professional-looking finish. Specs Application: 2x4 Trailer bunk boards Dimensions: 3-3/4" Wide x 1-5/8" tall Color: Black Includes: 4 Endcaps
... Perfect for single-trailer installs or replacements. Designed for 2x4 boards and pairs with Caliber bunk wrap. Hardware not included.They pair perfectly with Caliber wrap and give your setup a smooth, professional-looking finish. Specs Application: 2x4 Trailer bunk boards Dimensions: 3-3/4" Wide x 1-5/8" tall Color: Light gray Includes: 4 Endcaps
If you're tired of fighting your bunks every time you load and unload your boat, these slides cut drag and self-center your boat so it loads straight and smooth. This 4-piece kit is pre-formed to quickly cover two 8' bunks.It's a complete, one-and-done upgrade that makes every trip to the ramp easier. Specs: Fit Works with: 2x4 bunk boards (not included) Covers: (2) 8' bunks (4-piece kit) Material Construction: polyvinyl Color: black Hardware: includes stainless steel screws Dimensions & Weight Overall fit: 4' long x2" tall x4" wide per section Total weight: 7 lbs General Warranty: 1-year limited Made in the USA
When you need sturdy sidewalls for your flatbed truck or utility trailer, this weld-on stake pocket makes it simple. Just drop in a 2x4 board and know your cargo is staying put. It's raw metal, so give it a painted finish to prevent rusting.Made in the USA Specs Application: Trailers and flatbed trucks Weld-on installation Accepts standard 2x4 (1-1/2" x 3-1/2") Dimensions: Overall: 4-1/4" long x 3" tall x 1-7/8" deep Pocket opening: 3-5/8" wide x 1-5/8" deep Thickness: 4-gauge Made in the USA
Working on multiple trailers? This wrap cuts drag at the ramp so your boats glide on and off with less effort. And with 250' to work with, you'll have plenty of wrap for large-scale projects or for stocking your boat supply store.Pair it with stainless hardware and Caliber bunk end caps (sold separately) for a professional finish. Specs Application: Multiple 2x4 bunk boards Dimensions: Wrap: 9-1/8" wide x 250' long Color: Black Warranty: Limited lifetime warranty
Working on multiple trailers? This wrap cuts drag at the ramp so your boats glide on and off with less effort. And with 250' to work with, you'll have plenty of wrap for large-scale projects or for stocking your boat supply store.Pair it with stainless hardware and Caliber bunk end caps (sold separately) for a professional finish. Specs Application: Multiple 2x4 bunk boards Dimensions: Wrap: 9-1/8" wide x 250' long Color: Light gray Warranty: Limited lifetime warranty
Add or replace a tie-down attachment point on your boat trailer with this sturdy anchor bracket so you can easily hook up your tie-down strap and secure your boat to your trailer. Strong steel construction is durable.Features: Tie-down anchor adds or replaces an attachment point on your boat trailer Hook tie-down strap (sold separately) to bracket and secure your boat to your trailer 11-Gauge steel construction Weld-on or bolt-on installation Drilling required for bolt-on installation Made in the USA Specs: Quantity: 1 anchor bracket Dimensions: 1-1/2" wide x 3" long x 1-3/4" tall Hole diameter: 3/8"
Uneven tubes can leave scuffs and make loading stressful. This galvanized bracket lines up your 6' and 4' bunks so your pontoon settles square, cutting down on rub marks and standing strong against spray and saltwater.Specs Application Fits 6' long x2" wide and 4' long x2" wide bunks For 2x4 bunk boards; accommodates 2x6 boards Dimensions and Weight Overall dimensions: 15-11/16" long x4-11/16" wide Weight: 2 lbs Material Material: 11-gauge galvanized steel Color: silver General Warranty: 1-year limited Made in the USA
Heavier pontoons need more contact to ride steady. This wide 6-3/16" galvanized bracket spreads the load across your bunks, keeping tubes square on rough hauls while resisting spray and saltwater season after season.Specs Application Fits 6' long x2" wide and 4' long x2" wide bunks For 2x4 bunk boards; accommodates 2x6 boards Dimensions and Weight Overall dimensions: 15-11/16" long x 6-3/16" wide Weight: 2.33 lbs Material Material: 11-gauge galvanized steel Color: silver General Warranty: 1-year limited Made in the USA
Light-duty, rust-resistant bracket lets you mount a bunk board on its side and enables the board to pivot. Mounting slot allows for height adjustment. Dimpled surface helps keep bracket from sliding along trailer frame.Features: Light-duty bracket lets you mount a bunk board on your boat trailer Ideal for 2x4 or 2x6 bunk boards on small craft trailers Enables the bunk board to pivot during loading Stabilizes bunk board when 2brackets are used (additional bracket sold separately) Dimpled and lanced design keeps bracket from sliding along trailer frame Slotted mounting hole permits as much as 4-3/8" of height adjustment during installation Bracket installs vertically on your boat trailer's frame with a U-bolt (sold separately) 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 1 bracket Height: 7-1/2" Inside width: 1-3/4" Mounting slot dimensions: 4-3/8" long x 7/16" wide Bunk board mounting hole diameters: 7/16" Typically mounted upright on a boat trailer's crossmembers, vertical bunk brackets allow you to mount a bunk board on its skinny side and run the board from the front of the trailer to the back.
Light-duty, rust-resistant bracket lets you mount a bunk board on its side and enables the board to pivot. Mounting slot allows for height adjustment. Dimpled surface keeps bracket from sliding along the trailer frame.Features: Light-duty bracket lets you mount a bunk board on your boat trailer Ideal for 2x4 or 2x6 bunk boards on small craft trailers Enables the bunk board to pivot during loading Stabilizes bunk board when 2 brackets are used (additional bracket sold separately) Dimpled and lanced design keeps bracket from sliding along trailer frame Slotted mounting hole permits as much as 6" of height adjustment during installation Bracket installs vertically on your boat trailer's frame with a U-bolt (sold separately) 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 1 bracket Height: 8-1/2" Mounting slot dimensions: 2-1/2" long x 7/16" wide Spacing between mounting slots: 1/2" Bunk board mounting hole diameters: 7/16" Typically mounted upright on a boat trailer's crossmembers, vertical bunk brackets allow you to mount a bunk board on its skinny side and run the board from the front of the trailer to the back.
Light-duty, rust-resistant bracket lets you mount a bunk board on its side and enables the board to pivot. Slotted mounting hole allows for height adjustment.Features: Light-duty bracket lets you mount a bunk board on your boat trailer Ideal for 2x4 or 2x6 bunk boards on small craft trailers Enables the bunk board to pivot during loading Stabilizes bunk board when 2 brackets are used (additional bracket sold separately) Slotted mounting hole permits as much as 6" of height adjustment during installation Bracket installs vertically on your boat trailer's frame with a U-bolt (sold separately) 11-Gauge, galvanized steel resists rust and corrosion Made in the USA Specs: Quantity: 1 bracket Height: 9-1/2" Mounting slot dimensions: 6" long x 1/2" wide Bunk board mounting hole diameters: 7/16" Typically mounted upright on a boat trailer's crossmembers, vertical bunk brackets allow you to mount a bunk board on its skinny side and run the board from the front of the trailer to the back.
Light-duty, rust-resistant bracket lets you mount a bunk board on its side and enables the board to pivot. Mounting slot allows for height adjustment. Dimpled surface keeps bracket from sliding along the trailer frame.Features: Light-duty bracket lets you mount a bunk board on your boat trailer Ideal for 2x4 or 2x6 bunk boards on small craft trailers Enables the bunk board to pivot during loading Stabilizes bunk board when 2 brackets are used (additional bracket sold separately) Dimpled and lanced design keeps bracket from sliding along trailer frame Slotted mounting hole permits as much as 6" of height adjustment during installation Bracket installs vertically on your boat trailer's frame with a U-bolt (sold separately) 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 1 bracket Height: 9-1/2" Mounting slot dimensions: 6" long x 7/16" wide Bunk board mounting hole diameters: 7/16" Typically mounted upright on a boat trailer's crossmembers, vertical bunk brackets allow you to mount a bunk board on its skinny side and run the board from the front of the trailer to the back.
Light-duty, rust-resistant bracket lets you mount a bunk board on its side and enables the board to pivot. Slotted mounting hole allows for height adjustment.Features: Light-duty bracket lets you mount a bunk board on your boat trailer Ideal for 2x4 or 2x6 bunk boards on small craft trailers Enables the bunk board to pivot during loading Stabilizes bunk board when 2 brackets are used (additional bracket sold separately) Slotted mounting hole permits as much as 6" of height adjustment during installation Bracket installs vertically on your boat trailer's frame with a U-bolt (sold separately) 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 1 bracket Height: 12-5/8" Mounting slot dimensions: 9-1/8" long x 1/2" wide Bunk board mounting hole diameters: 7/16" Typically mounted upright on a boat trailer's crossmembers, vertical bunk brackets allow you to mount a bunk board on its skinny side and run the board from the front of the trailer to the back.
Optimize your trailer's storage by creating a shelf with this e track wood beam socket. Supports one end of a standard 2x4 board. 500-lb Load limit.Features: Create a shelf for extra storage in your trailer Just snap into an e track anchor and slide in a board Add another socket to hold opposite end of board in place Works with a standard 2x4 board (not included) Pre-drilled with holes in sides to secure wood with screws (not included) Attaches to e track easily with spring fitting Specs: Quantity: 1 socket bracket Overall dimensions: 3-3/8" long x 1-11/16" wide Safe working load limit (WLL): 500 lbs 1-Year limited warranty
Mount your boat trailer's bunk board using this rust-resistant bolster bracket, which helps support your bunk when used with a swivel bracket (sold separately). ... Features: Bolster bracket lets you attach a swivel bracket (sold separately) for mounting a bunk board to your boat trailer 2Brackets are required to mount 1 bunk board (additional bracket sold separately) Dimpled surface helps prevent the bracket from sliding along your trailer's frame Mounting slot lets you adjust the bracket's height during installation Bracket installs vertically on your boat trailer's frame 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 bracket Dimensions: 12" tall x2-1/4" wide x 1-1/8" thick
Add or replace a tie-down attachment point on your boat trailer with this sturdy anchor bracket so you can easily hook up your tie-down strap and secure your boat to your trailer. Strong steel construction is durable.Features: Tie-down anchor adds or replaces an attachment point on your boat trailer Hook tie-down strap (sold separately) to bracket and secure your boat to your trailer 11-Gauge steel construction Weld-on or bolt-on installation Drilling required for bolt-on installation Made in the USA Specs: Quantity: 1 anchor bracket Dimensions: 1-1/2" wide x4" long x 1-3/4" tall Hole diameter: 1/2"
These surface-mounted D-rings are recessed so you can easily roll or slide your cargo over them, and they reduce tripping hazard. Create attachment points for ropes, straps or bungee cords to secure push mowers, tillers, and other lightweight cargo.Features: Light-duty tie-down anchors provide solid points to secure your cargo with ropes, straps or bungee cords Let you anchor push mowers, tillers, and other lightweight cargo on your truck, utility trailer or enclosed cargo trailer Recessed design lets cargo roll or slide over anchors with no interference D-rings rotate over 90 degrees so you can attach your ropes, strap or bungee from multiple angles Steel construction with clear-zinc plating is strong and corrosion resistant Bolt-on installation to most flat, solid surfaces Mounting hardware not included Specs: Quantity: 4 Maximum load (break strength): 1,200 lbs Safe working load limit (WLL): 400 lbs D-ring dimensions: Thickness: 1/4" Inner diameter: 1-5/8" wide x 1-3/16" long Overall width: 2-1/8" Base plate dimensions: 4-3/16" diameter x 7/16" tall Distance between mounting holes (center to center): 1-1/4" 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Filters
