Replaces the amber lens for your oval Peterson clearance or side marker light with reflector. Fits 106A and 108WA series lights.Features: Replaces the amber lens for your oval Peterson clearance or side marker light with reflector Fits 106A and 108WA lights Built-in reflex reflector removes the need for a separate reflector Acrylic lens construction
4" x 2-1/16" Oval. Incandescent trailer light serves as a clearance or side marker light when properly mounted. Built-in reflex reflector. Durable ABS housing. Surface mount - hardware not included. 1-Wire design. P2 rated.Features: Oval trailer light functions as either a side marker or clearance light when properly mounted Built-in reflex reflector removes the need for a separate reflector Incandescent bulb can be easily replaced Durable ABS plastic base Amber snap-on lens over incandescent bulb Compatible with 12V DC electrical systems Surface mount on trailer - hardware not included Single wire design grounds through mounting hardware DOT compliant P2 rated Specs: Overall dimensions: 4" long x 2-1/16" tall x 1-3/16" deep Distance between mounting holes (center on center): 3" Bulb type: 194 3-Year warranty Manufacturer Cross Reference Light will work as an exact replacement for: Uni Bond # ML2042A Truck Lite # 26304Y Grote # 46703 Peterson # 108WA P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
4-1/16" x 2-1/16" Oblong. Incandescent trailer ligth serves as a clearance or side marker light. Built-in reflex reflecor. Durable molded plastic base. Surface mount - hardware not included. 1-Wire design. P2 rated. (1) 194 bulb.
The Curt Spectrum Trailer Brake Controller part #C51170 can be installed on your 2020 Land Rover Discovery. You will need the Universal Installation Kit for Trailer Brake Controller part #ETBC7 and the ZCI Circuit Protected Vehicle Wiring Harness w/…
Hey Joshua thanks for the question. The only lift kit we used to have for a 3,500 lbs diamond torsion axle is the Single Diamond Torsion Axle LC270682. We have not carried it for over a year though. Lippert's part number for it is 270682.…
We do have a lift kit for your Lippert 7K torsion axle but the Dexter Torflex Lift Kits like part #K71-725-02 are designed to fit specific Dexter torsion axles. For example, the above mentioned kit will only fit a #12 Torflex axle that has a 5,500 -…
Hey John. According to the instructions the Blue Ox Patriot Portable Flat Tow Brake System item #BLU37TR is covered by a 2-year limited warranty that is serviced through Blue Ox. Are you looking at setting up a vehicle to be flat towed? If you would…
Hey Dennis, The bracket the mounts to the trailer wall would need to be installed at the factory and unfortunately isn't an option aftermarket. These are relatively new so I'm assuming after enough people complain to Lippert they'll start…
I do have options for you but there would be no way for me to know what type of light bulbs your trailer lights use. For trailer lights there are generally two types which are bayonet or push-in. Most taillights use a 1156 or 1157 bulb like part…
I wasn't able to find the Atwood 36720 RV Propane Gas Detector you mention, however I was still able to find the RV Propane Gas Detector #RS64FR in white, or #RS44FR in black to work as a replacement for your Protechtor Series 2001 LP Gas…
A 4,400 pound Lippert axle has a 6 on 5/12 bolt pattern and uses bearings #L44649 and #LM67048. So a good replacement hub that includes a bearing kit is part #8-407-5UC3-EZ.
The female socket that the Tekonsha Brake Controller Adapter, item #3020-P, will plug into, is located under the dash on the left side just above the emergency brake pedal, see photos at right. Normally this connector is blue and it is located in…
To the best of our knowledge there is no plug-in adapter that will work on your 2015 Ford Transit T250. There should be a bundle of wires under the driver side dash that you can connect the adapter that you have picture to. Simply cut off the end…
The foot plate of the Fulton #F1413200334 F2 Trailer Jack isn't removable. For a similar jack with a caster wheel, you'd want to go with #F1413050334. Because the caster wheel limits the weight capacity, the #F1413050334 jack has a 1600 lb…
Filters
