Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
As you have come to find out, the paddle style handle you have on your Wells Cargo Trailer is very large and they just don't make anything that large to replace this nowadays. The largest paddle style handle we have is the Paddle Handle Locking…
view full answer...The number 5.30 on your tire is the section width of the tire which means the tire is 5.3 inches wide. For a comparable radial tire for your boat trailer you can use a tire like part #AM10130. This tire measures 5.7-inches wide. The #AM10130 tire is…
view full answer...To create barn doors out of your ramp door, you will need hinges and a latch. I suggest a latch/lock system like the Universal Cam-Door Lock for Enclosed Trailers - 1" Keeper, #383200. This will use a 3/4 inch diameter pipe that you'll have…
view full answer...The #36283-955 and #362416-955 are sold in 93-1/2" long sections, which equates to 7'-9" long.
view full answer...For your Featherlite car trailer you referenced, I recommend the Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector #HS381-9000. This will allow you to connect the wires within a junction box to avoid in-line splicing.
view full answer...We carry all sorts of RV door parts including hinges and latches that you can see on the linked pages. I included links to hinges, latches and weather-stripping like #WS1434 and vinyl trim like #CAM25103. Since trailer makers do not keep track of…
view full answer...A trailer light that only has 1 wire means that it grounds through its mounting hardware. The single wire is the power wire. The best surface to ground a light to is steel. If steel is not available in the area the light installs you can attach a…
view full answer...Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…
view full answer...Based on the picture you provided it does look like your 1985 Hale Horse Trailer uses the AL-KO 4-bolt pattern and would require you to use the Dexter Electric Brake Kit #23-105-106-09. This kit is designed for 6000lb axles and measures 12" x…
view full answer...I spoke with the manufacturer and they recommend using 160 ft-lb for the torque spec on a 3/4 inch U-bolt #11-70.
view full answer...According to the installation instructions from Dexter Axle the torque specs for the wet bolts on their Dexter E-Z Flex Suspension Kits, like part #K71-653-00, is 30 - 50 ft-lbs. I have attached a clip from their instructions for you to check out.
view full answer...What you have on your horse trailer is a pretty common clearance light that we do offer in red and amber as an LED. For the red you'd want the part #AL91RB and for amber part #AL91AB. You'll also need the grommet part #A91GB and the right…
view full answer...Related Searches
Filter Your Search
Contact and Help