Result: 59496

Hello Korey, I am sorry to hear that you got the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56403 installed in your 2020 VW Tiguan and are having issues with the left tail light. Were you able to hook the trailer up…

The correct way to wire your breakaway battery, like the Hopkins Engager #20400, is to have the black wire from the battery connected to the 12V power on your trailer, and then the blue wire to your breakaway switch which, in turn, connects to the…

Hello David, thanks for reaching out. There are a few things you will want to check here. The first will be to make sure the module has a good ground. You may need to sand the ground area to get rid of any paint or corrosion that could be causing a…

For your 2018 Lexus RX350L the wiring harness #118255 is not a fit. You will use the harness #118252 if you have the factory tow package. This harness will be near the hitch on the driver's side of the vehicle and this harness has a protective…

The only thing I found on your Dexter 70-7 is the Replacement 13" Rotor for Dexter Disc Brakes #K71-631-00 which has 70-7 stamped on it. The #K71-631-00 fits 8,000 lb. Dexter disc brake kits like the #K71-646-2, #K71-646-2-91 or #K71-646-2-90.

I have attached a wiring diagram of the Replacement Hand Controller for Meyer Straight Blade Snowplow part #3371306901 to this answer page for you.

With the Tekonsha Prodigy P3 Trailer Brake Controller #90195 showing Output Shorted, No Brakes it is telling you there is a short in the wiring from the brake output wire to a ground or other wire. Since you do not have a trailer connected you will…

No, I am sorry we do not have any pictures or instructions of the Oris Hitches Detachable Hitch item #TS76VR installed on a 2024 Volvo XC60 Recharge. We haven't had an opportunity to install this hitch yet. What I do have, that I hope helps, is…

I would be happy to help. The Curt Trailer Hitch Receiver #C15511 measures 33.26" wide, 5.562" between the two mounting holes closer to the rear of the truck, and 11.43" between the center and furthest forward mounting holes. The Curt…

The Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" #C15802 has 3 different hole dimensions for mounting. The two holes closest to the receiver are 36.31 inches on center. The widest holes are 37 inches on center and…

There will be a total of 6 fasteners that will be used to install the Curt Hitch part #C15302. Four come with the hitch and the other two are bolts that are in the truck's frame currently. That is why there are only 4 bolts in the product…

The distance from the top of the receiver to where it would mount on the bottom of the truck is 6" on the #C15845 Curt Trailer Hitch Receiver. The distances between the mounting bolts vary so I am attaching a picture showing the different…