Result: 20011

Hey Harry, thanks for reaching out. Your Coachmen Freedom Express is set up for 30 amp service and we do have twist lock power inlets that will work for you. What you'll need is one of the following: - Mighty Cord Replacement RV Power Inlet -…

To wire in the Trailer Breakaway Kit Battery Charger #20011 you'd run the black wire to the 12 volt accessory circuit of the trailer wiring, the red wire to the battery in the breakaway switch and the blue wire breakaway switch. The 12 volt…

To convert the WFCO WF-8955PEC to be lithium compatible you'd need the part #PD4655V and you'd be set. This fits in the panel without any modifications.

Thanks for your question, Ron I can definitely look into that for you. Some information I'll need is what model of Mach you have and how old it is. There was a recent change with what refrigerant is used and because of that most if not all parts…

If you want to upgrade from your Jensen stereo #JWM70A we have a great option for you. Furrion makes a really nice Rv stereo #DV1230BL. This has an HDMI port to connect your laptop, as well as USB and AUX ports. It is also Bluetooth compatible so you…

I am sorry Beth, but we do not offer an equivalent to the AL-KO 5/8 hub assembly #568215. We do carry replacement bearings for this hub with the #TRJM511946 inner bearing and the #JM205149 outer bearing, but we do not offer any hubs that use this…

The seal you need for your trailer hub is the #58846. Or for a bearing kit that includes all of the components you'll need you'd want the #BK2-100. For brake assemblies you'd want the part #AKEBRK-35L for the left side or part #AKEBRK-35R…

Overall length is just under 1 inch, it is .983 inches. Diameter of the base is all just under an inch at .987 inches. It is designed to fit a Reese 16K hitch, part #RP30047.

The Reese Replacement Rubber Bumpers #30536 are intended for the side of the hitch closest to the cab. The pin head screw goes through the center of the rubber bumper and a speed nut goes through the bottom. I have provided links to the installation…

Good news! I can help you wire your 12 volt fuel pump to work with your 7 way vehicle plug. To accomplish this task you will need a few things: 7-way plug #A7WCB 10 gauge wire #10-2-1 2 pole flat wiring #HM47965 butt connectors #DW05745-5 First thing…

We've seen the butterfly style of coupler lock like the Tow Ready #3008 work really well on the thumb latch style couplers like Pro Series part #PSA265S0303 that you referenced. This would be a really great choice. I can't guarantee it would…

The bolts for channel mount coupler #CTA-400 have the markings for grade 8 bolts. They are 5/8 inch coarse threaded bolts so the minimum torque value is 159 and the max is 212 (foot pounds). Once torqued down the force will cause the metal of the…