1998  x   >   !TorkLift  x   >   Hydrastar  x   >  

Im looking to install electric brakes on my trailer and brake controller in my vehicle. Vehicle: 1998 Jeep Cherokee has 4 pin connector Trailer: Aluma 7712H with factory axles Aluma says 3500 lb rated at 2990 lb EZ lube. Axle has 4 hole square...

Do these backing plates have the same bolt pattern as the 5 bolt backing plates on the 7000 pound axles? Part #AKEBRK-6, for instance. We have a large horse trailer, with 12x2inch brakes on it we want to convert larger brakes. Thank you. |...

Would like to convert my 2014 cross country with 2 6000# axles to \hyd. brakes with electric /hydraulic actuator. Looking @ AKFBBRK-7 but not sure which actuator would work best? need brakes for backing down hills. It would be awesome to have...

I need to fit a actuator for my tri axle boat trailer with 6 disc brakes and a controller for my 1998 Surburban could you please advise!! the trailer and boat weighs aty about 8000 lbs. | When using an electric over hydraulic brake actuator,...

I am looking at plug Code: C57674 I also need a trailer side plug. can you recomend? | If you are looking to add a 4-Way on your trailer to activate the basic trailer light functions then I recommend installing the Hopkins Endurance Easy-Pull...

Im converting my tandem axel boat trailer with 6000lb axels to 12inch Kodiak disc brakes and an electric over hydraulic system. What is the best overall actuator to use, Titan, Dexter or Carlisle? I noticed the Titan has max PSI of 1500 vs 1600...