Q8 x > LaPalma x > DayBreak x >

Aluminum Ball Mount and Cushioned Hitch Ball for Use with 2021 Kia Telluride

I have 2021 KIA Telluride I have purchased a receiver form you guys and I need to get ball mount and my measurements are 14.25 at the the receiver and the trailer level is 16.0 that being said puts me at 1.75 of rise so I round that up I guess...

What are the Dimensions of the 2006 Monaco LaPalma Roadmaster Rear Anti-Sway Bar RM-1259-109

My motorhome is an 06 Lapalma diesel pusher...34 Im pretty sure the Roadmaster 1259-109 is the bar Im needing... Question... Can you give me the length of the arm from the center of the torsion bar...ive measured the chassis and it appears that...

Replacement Jam Nut for 19F0J Wheel Liners

My wheel studs are 3/4”. I ordered the 19f0j which has approximately 1/2” threads. I can’t find the specs on it. | Since you said you ordered the 19F0J wheel liners then you need part # WM9073 instead as this is the correct fit for them and...

Recommended Flat Towing Setup For 2009 Chevy HHR Behind 2005 Monaco Motorhome

Hi, I have a 2005 Monaco Motorhome that I recently purchased. It came with A Roadmaster Stowmaster tow bar. I have the tow bar, safety cables and wire harness on the RV. I intend to tow a 2009 Chevy HHR not SS. I also have the brackets which...

Availability of Trailer Hitch Receiver for 2024 Audi Q8 e-tron

I have a 2024 Audi Q8 e-tron and I'm looking for a hitch that fits. Not sure if there is one or not. Are you able to help me? | There is one hitch available that fits your 2024 Audi Q8 e-tron. That hitch is the Stealth Hitches Hidden Rack Receiver...

Recommended Kayak Carrier

Hi I have a new Audi Q8 with factory fitted cross bars. Im looking to mount a fishing kayak weighing circa 100lbs flat on top and need suitable cradle system. Please recommend. | To add a kayak carrier to your Audi Q8's factory crossbars you...

4-Pole Wiring Harness for 2002 Damon DayBreak

2002 daymon daybreak, chev workhorse chassis, need vehicle wiring 4 wire flat , vehicle has independent brake and turn signal lites. tks | For a 4-pole flat wiring harness for your 2002 Damon DayBreak built on a Chevrolet Workhorse chassis,...

Troubleshooting Tekonsha Prodigy RF Not Pairing To 2020 Audi Q8

Hello I am having trouble connecting my prodigy rf to my audi q8. The trailer directly connects to the car with no issue and lights all function, but I cannot pair the controller. I saw a post recently However, I am wondering that since the...

Will The Curt Adapter C35FR Work On A 2024 Audi Q8

Will this work properly on a 2024 Audi Q8 eTron with the factory towing package? I’d like to use it with a kayak trailer that has a 4 pin connector and LED lights. Thank you | Yes, the Curt adapter # C35FR is exactly what you will need to use...

Can I Use the Curt Echo Mobile Brake Controller in a 2019 Audi Q8

Will this fit an Audi Q8, getting conflicting reports. | All that is required to make the Curt Echo # C51180 compatible with a vehicle is a 7 way trailer connector with a dedicated 12v charge line. As long as your 2019 Audi Q8 has a 7 way where...

Hitch Confirmed to Fit a 2022 Audi Q8

Is there a hitch option for the 2022 Audi Q8? | There is. The Stealth Hitches Hidden Rack Receiver # 391AUDQ818 is confirmed to fit all models of the 2022 Audi Q8. This hitch is made in the USA, has a bolt-on, no-drill installation and will...

Trailer Wiring And 7-Way Upgrade Kit For A 2019 Audi Q8

I have a Audi 2019 Q8. It has the hitch but not the wiring harness to power lights on the trailer. Do you have a wire harness I can use for this car? | For your 2019 Audi Q8, you can use the: -Tekonsha ZCI Circuit Protected Vehicle Wiring...

Trailer Hitch Extension for 2 Inch Hitch on 2019 Audi Q8

I have a new vehicle Audi Q8 with trailer ability factory installed. I tow a double jet ski and want to prevent the rear wheels from going in the salt water. I would use the device only on the ramp and not to tow on roads. I was hoping a 36...

Tool Recommendation for Shortening Length of Ventline Roof Garnish

Question: Im trying to determine which garnish trim that I need for my 2000 Fleetwood Southwind Storm 30H. The roof is 4inch inches thick and the garnish that I need to replace is 4-1/2inch in height. Which garnish trim do I need? asked by:...

<< Back to Results

Filter Your Search