Recommended Rear Suspension Enhancement For 2019 Kia Sedona
Do you know any Timbren suspension system would fit 2019 Kia Sedona? Thank you! | I have another option for you, but at this time there is not a Timbren suspension option confirmed to fit your 2019 Kia Sedona. Instead I recommend the Coil...
Could Timbren Axle Less Setup be Used on a Tandem Boat Trailer Application
I would love to add these and replace the old axles. Will the Axleless work and would I need to raise or lower from current setup? | The Timbren Axle Less kits like the part # ASR3500S05 were designed to provide the same height as a standard...
Replacement Axle Recommendation for 96" Hub Face and 84" Spring Center Dimensions
I am looking for a replacement gavanized axle, hubs and springs for a double jetski trailer. Hub face is 96 Spring Center is 84 5 X 4.5 Hubs 26 spring hangers. Im having a hardtime finding something that works. | Your hub face and spring center...
Will Timbren Rear Suspension Enhancement System Fit a Lifted 2017 Ford Explorer
HI! I have a 2017 ford explorer. I will be adding a 2.5 lift system to my vehicle. Will this still work if I add this as well. Or will spacers be needed?? Thanks! | In order to install the Timbren Rear Suspension Enhancement System part # TFRFLX...
Which Hub/Drum and Brake Assemblies Will Fit a 7k Timbren Axle-Less Suspension
Im trying to determine how much weight it will add to use a Timbren TASR7KS02 with Dexter hub 42866UC3-EZ and Dexter electric brake assembly 23-106 in conjunction with Provider TA56VR tiresandwheels. Can you comment if the four parts specified...
Replacement Axle Solution for 1989 Avion Travel Trailer
Hi, we have a 28 ft 1989 Avion travel trailer that weighs 5200lbs. We need to replace the axels but are not sure what we can replace them with. I’ve attached a few photos for review. | Looks like you have a trailer with tandem Al Ko torsion...
Estimated Install Time for Timbren Silent Ride Suspension Kit # TSR14KT01
Wondering about approximate installation time on this product. I work on axles, etc often. I am a welder with lots of experience. Wondering what the company says should be the installation time. Thanks | For someone like you with plenty...
Suspension Enhancement for 2018 Chevy Silverado 3500 Cab and Chassis
Can I get these to fit a 2018 3500hd drw cab and chassis | I checked with Air Lift and unfortunately the LoadLifter 7500 XL Air Helper Springs # AL57538 you referenced will not fit your 2018 Chevy Silverado 3500 Cab and Chassis and there's...
Recommended 7K Axles for Raised Platform Trailer
I have raised platform trailer where the platform is 350 mm raised off the subframe. The whole unit is built off 3 mm box stock the actual frame is 2x3 with 2x3 frame connectors. My dilemma is that trying to find an axle setup that allows for...
Are Timbren Suspension Enhancement Springs a Good Option for 2019 Ford F-150
I was looking at the Timbrens for 2019 ford f-150. are these a good fit for my truck? do they help? how? | The Timbren Rear Suspension Enhancement System # TFR1504E you referenced are more than a good option for your 2019 Ford F-150, they are...
Spacer Recommendation to Use Timbren Kit on 2017 Ford F-150 with 3 inch Lift
I have purchased Timbren Rear SES Suspension Upgrade TFR1504E, now the issue is my truck is lifted 3inch from rough country bolt on lift kit . Was looking at spacer F2367. would this be a good addition for my truck? Year :2017 Make:FORD Model:...
Does 3,500 lb Trailer Hub # AKIHUB-550-35-K Fit Timbren Axle Less Kit # ASR2KHDS03
Will the AKIHUB-550-35-K hubs work with the Timbren asr2khds03 axles, and will they handle 17inch rims? | Yes, the Trailer Idler Hub Assembly # AKIHUB-550-35-K that you referenced does fit on the Timbren Heavy-Duty Axle-Less Trailer Suspension...
Recommended Front Helper Springs for Snow Plow Equipped 2018 Ram 2500 Power Wagon
2018 Ram 2500 Power Wagon. Considerable amount of sag with V plow installed. What products do you suggest for this vehicle to minimize the sag with the plow installed? | Timbren makes a Suspension Enhancement product, part # TDF25004E that...
Recommended Solution to Replace Torsion Axle on 3500-lbs Boat Trailer
Im baaaaaack! hey guys, need to replace the torsion axle on my boat trailer. Couldnt find anything on your website, the one that is on there is a tie down engineering, 3500lb max cap, 2750779 than-Q in advance | I may have a solution for...
Timbren Axle Less Setup for Off Road Camper that Uses Jeep Wheel Bolt Pattern
i have a 2018 runaway range runner 6x9 camper and there is only about 6 inch clearance as it sits now 3500 axle. i drive a Jeep Wrangler and would like to take camper off road. would timbren axleless sysytem work for my purposes? and how do...
Will the 3.5K Timbren Axle-Less Trailer Suspension System Work On An I-Beam Frame
I have a easy tilt boat trailer for my 19’ Century. I weighed my boat and it weighs 2,250#. Amy trailer is a single axel. The axel is bowed to the ground, both tires are cambered in at the top of tires. That said, i was looking at these bolt...
Does Trailer Frame Need to Get Reinforced to Install Timbren Silent Ride
Do i have to reinforce the frame | When installing the Timbren Silent Ride part # TSR14KT01 you do not have to reinforce the trailer frame. |
Timbren Axle Less Kit for 2021 InTech Luna to Use Jeep Wrangler Wheel Bolt Pattern
I have a 2021 InTech Luna with the 2200lb axle, I would like to upgrade it for serious offroading and I would like to mount the same tires on it that are on my 2020 Jeep JLUR. What do I need to make the conversion? | The Jeep JL Wrangler wheel...
Are There SumoSprings for a 1965 Chevrolet C10 Pickup
I have a 65 C10, there is 8 inches from frame to axle. What is the length of sumo springs? And do you have the for a 65 C10 | I do have a suspension enhancement option for a 1965 Chevrolet C10 Pickup in the Timbren Rear Suspension Enhancement...
Is There a Trailer Spacer Lift for Torsion Axle with 6.5" Apart Holes
Hello, Im looking to put a 2-3 inch spacer lift on my 2011 Silver Shadow Tear. It looks like my center on center spacing of my axle to frame is 6.5 inches. Is there a product out there for me? An option to have a custom spacer made? The ones...
Will The SumoSprings Fit On a 2022 GMC Sierra 1500 Limited With a 2 Lift?
Will the Sumospring #SS45FR fit and work properly on my 2022 Sierra 1500 limited if I use the one inch spacer? With the 2inch lift on the truck, will the be correct travel distance with the Sumospring? Will there be any trimming involved?...
Does Timbren Suspension Enhancement Fit 2023 Toyota Tundra TRD Pro
I frequently pull an airstream and a boat. Just purchased a 2023 Toyota Tundra TRD Pro. Not sure of the factory suspension lift, but curious if this Timbren system will work/fit on the TRD Pro? Thanks | It will! I verified with Timbren for...
Timbren or RAS for a 2021 Chevy Silverado 1500 Pulling a Trailer
Hello, I have a 2021 Chevy Silverado 1500 V6 diesel and wanted to improve my trucks suspension when hauling. Either my travel trailer 3850 loaded or my 2 horse trailer 5400 loaded. I was wondering about if these two products could be used to...
Compatibility of Timbren Suspension for Light Duty Trailers on 1957 Cardinal Travel Trailer
My 1957 Cardinal travel trailer bounces and rolls quite a bit when traveling over the slightest bump. Can you recommend a solution given the measurements shown in my photo? Note: the trailer SN: W1426 is all original including the springs,...
Filter Your Search
Contact and Help