Search: knobs > Performance Tool x > RaxGo x > GMC x >
Troubleshooting No Trailer Brakes with Curt Spectrum Installed on 2018 GMC Sierra 1500
After installing the control the knob is saying no trailer is connected. All the lites on the trailer are on so I assume my connection is good. | I have a 2018 GMC Sierra 1500. I bought the Curt 51170 in Dec. 2019 and just...
Tekonsha Voyager XP Brake Controller Installed On A 2006 GMC Sierra 2500 Not Engaging Brakes
The only issue I can find is that the LED light does not pulsate from green to orange when I adjust the LEFT level knob, which is what the instructional video says should happen. | I have a Tekonsha Voyager XP on a 2006 Sierra...
Brakes Lock Up On Horse Trailer When Connected To 2005 Ford F250 With Valley Brake Controller
You should have power into the controller on the black wire and power leaving the controller on the blue wire when the brake pedal is pressed, or the manual slide knob is activated. The red wire should have power on it only when the brake pedal is pressed. |
P2 Brake Controller Shows nc Not Connected when a Trailer is Connected
The controler does not show C, nc appears when either beske is applied via pedal or manually by trailer brake knob. | I would like to have ts hits and information enabling me to troubleshoot the system, first i have 40 plus...
Related Searches
Filter Your Search
Contact and Help